Cognos Controller

 View Only
  • 1.  Adding codes to a form

    Posted Thu April 01, 2021 04:15 PM
    Hi basic error but I am getting this error message when adding a account code to an existing form!


    ------------------------------
    Paul Cherubin
    ------------------------------


  • 2.  RE: Adding codes to a form

    Posted Fri April 02, 2021 12:04 PM
    Hi Paul,

    Just so it's searchable, here's the error:
    ~~~~~~~~~~~~~~~~~~~~~~~~~​
    Cell XYZ contains an invalid account
    ~~~~~~~~~~~~~~~~~~~~~~~~~

    You probably found this already, but here's a Technote I wrote many years ago: https://www.ibm.com/support/pages/node/386617 

    With luck, if you do the following it will solve the problem:
    1. Launch Controller classic client (CCR.EXE)
    2. Click 'Maintain - Special Utilities - Clear Local Cache'
    If that doesn't work, try a database optimise. Good luck!

    ------------------------------
    Richard Collins
    ------------------------------



  • 3.  RE: Adding codes to a form

    Posted Fri April 02, 2021 12:04 PM
    Hi Paul,

    Just so it's searchable, here's the error:
    ~~~~~~~~~~~~~~~~~~~~~~~~~​
    Cell XYZ contains an invalid account
    ~~~~~~~~~~~~~~~~~~~~~~~~~

    You probably found this already, but here's a Technote I wrote many years ago: https://www.ibm.com/support/pages/node/386617 

    With luck, if you do the following it will solve the problem:

    1. Launch Controller classic client (CCR.EXE)
    2. Click 'Maintain - Special Utilities - Clear Local Cache'
    If that doesn't work, try a database optimise.

    Good luck!

    ------------------------------
    Richard Collins
    ------------------------------



  • 4.  RE: Adding codes to a form

    Posted Tue April 06, 2021 04:51 AM

    Thanks Richard, yes that worked!

     

     

    Paul Cherubin
    Group Reporting Manager
    Empresaria Group plc
    Phone:
    44 (0) 7851 671700
    Email: 
    cherubinp@empresaria.com
          
     ******************************************************************************************************* 
     This email is sent on behalf of Empresaria Group plc (registered in England & Wales with number 3743194; registered office Old Church House, Sandy Lane, Crawley Down, Crawley, West Sussex RH10 4HS). This email (including any attachments) is confidential and may also be privileged. If you are not the intended recipient (i) you must not use, disclose, copy or distribute its contents (ii) please 
     notify the sender immediately and delete the email. Any views or opinions expressed within this email are those of the author and do not necessarily represent those of Empresaria. Emails may be monitored as permitted by applicable law. Empresaria exclude all liability for any loss or damage arising or resulting from the receipt, use or transmission of this email to the fullest extent permitted by law. 
     *******************************************************************************************************

      
       
     

     

    Hi Paul, Just so it's searchable, here's the error: ~~~~~~~~~~~~~~~~~~~~~~~~~ Cell XYZ contains an invalid account ~~~~~~~~~~~~~~~~~~~~~~~~~ ...

    Image removed by sender. IBM Community

    Cognos Controller

    Post New Message

     

    Re: Adding codes to a form

    Image removed by sender. Richard Collins

    Apr 2, 2021 12:04 PM

    Richard Collins

    Hi Paul,

    Just so it's searchable, here's the error:
    ~~~~~~~~~~~~~~~~~~~~~~~~~
    Cell XYZ contains an invalid account
    ~~~~~~~~~~~~~~~~~~~~~~~~~

    You probably found this already, but here's a Technote I wrote many years ago: www.ibm.com/support/pages/node/386617 

    With luck, if you do the following it will solve the problem:

    1. Launch Controller classic client (CCR.EXE)
    2. Click 'Maintain - Special Utilities - Clear Local Cache'
    If that doesn't work, try a database optimise.

    Good luck!

    ------------------------------
    Richard Collins
    ------------------------------

      Reply to Group Online   View Thread   Recommend   Forward  




     

     

    You are receiving this notification because you followed the 'Adding codes to a form' message thread. If you do not wish to follow this, please click here.

    Update your email preferences to choose the types of email you receive

    Image removed by sender.




    Original Message:
    Sent: 4/2/2021 3:20:00 AM
    From: Richard Collins
    Subject: RE: Adding codes to a form

    Hi Paul,

    Just so it's searchable, here's the error:
    ~~~~~~~~~~~~~~~~~~~~~~~~~​
    Cell XYZ contains an invalid account
    ~~~~~~~~~~~~~~~~~~~~~~~~~

    You probably found this already, but here's a Technote I wrote many years ago: https://www.ibm.com/support/pages/node/386617 

    With luck, if you do the following it will solve the problem:

    1. Launch Controller classic client (CCR.EXE)
    2. Click 'Maintain - Special Utilities - Clear Local Cache'
    If that doesn't work, try a database optimise.

    Good luck!

    ------------------------------
    Richard Collins
    ------------------------------