Welcome to the IBM TechXchange Community, a place to collaborate, share knowledge, & support one another in everyday challenges. Connect with your fellow members through forums, blogs, files, & face-to-face networking.
IBM TechXchange Community Together, we can connect via forums, blogs, files and face-to-face networking. Find your community
We are using cognos for operational reporting out of Manhattan TMS and EEM applications. Over a period data size increased a lot and report performance is very slow. We want to archive the historical data ...
Hi, Apologies for high jacking this thread, but I do have a quick continuation question on the subject of SV1 code levels. We currently have a 6 node cluster, where 2 of the IO groups are SV1, and 1 ...
Thank you Jared, I'll check that. ------------------------------ Anji Stephens ------------------------------
Hi Reisman, Thanks for the response. This is QRadar on premise distributed architecture with a separate app host. Firewall settings were confirmed and port 636 is enabled in both ways. ------------------------------ ...
Hi Jaykar, Thanks for sharing the webcast recording and slide links. However see that the slide uploaded at the link above has a different attachment related to session on GraphSQL. Can you please ...
Dear Team, I have below case that the back-end require below information to be consumed : host: https://www.test.text/v1/api/auth method : post content-type : multipart/form-data; boundary=test123 ...
Can you please share the slides against as the content uploaded in the link mentioned is referring to GraphSQL. ------------------------------ Vijayanand M ------------------------------
Hi Dushan, is this a QRadar or QRoC installation? If it is a QRoC installation, did you create a Data Gateway Proxy Mapping? LDAPS uses Port 636, did you check the certificate and the FW settings for Port ...
It's difficult to understand the screenshot as-posted, the left side looks like a 'working' ribbon outcome, and the right side is all-white. Does Excel indicate that the addin is disabled or failed to ...
Very basic question but I can't seem to find an answer: How can you output your raw data as a table? I know it can be copy-and-pasted from the data view, but I want it to be formatted like my other ...
Hi We are migrating flows from IIB 10 to ACE12.We are fallowing parallel migration .My doubt is we are planning to move to ACE 12.0.8.0 and MQ 9.3 on AIX 7.3 server.We are using GPFS file system. Please ...
Is it possible to automate the shutdown of Sterling B2b Integrator on a monthly basis? We have a 2 node cluster environment and would like to be able to automate the shutdown and startup for monthly server ...
> Delete an Array Candidate pdisk and Format to JBOD block size This is exactly where I received the message: 0940-120 JBOD format is not supported on SSD drives. ------------------------------ ...
Let me add to this : The ISIM 6 SW supported upgrade paths are ISIM 6 -> ISVG 10 IM SW and ISIM 6 -> ISVG 10 IM VA (the latter I would not recommend) Also be aware that we will deliver container ...
Summary Imagine your finance and accounting (F&A) function is using AI to deliver enterprise-wide transformation. We invite you into this not-so-distant future, where generative AI promises to enhance ...
Hi everyone, You can watch the on-demand recording here and download the slides here. Please share any of your questions below. ------------------------------ Michael McGeein --------------------- ...
Hi, Due to the nature of cube being multidimensional; you do need to separately add the totals to each of the nested hierarchies (as you have done with your two subset calculations. You can then ...
Templates are provided in the documentation: https://www.ibm.com/docs/en/cognos-analytics/11.2.0?topic=configuration-use-response-file-template. Other than the install path being in UNIX format they really ...
Thanks for replying. My situation is I made altinst boovg on a single SSD 400GB drive # lspv hdisk0 00f832dff6ad79d4 rootvg active hdisk4 00f832df91c2ef69 altinst_rootvg active From sissas0 controller, ...
Hi Dong, Here is a cheesy way that might work for you: 'clean' the date column in the Data Module. Select the date related field and then in the properties pane, edit the expression. To shift things ...
Invalid magic cookie means that your X authority isn't set up correctly. Curious that didn't appear in your previous screen captures. That likely means xauth is already installed but you might make sure ...
Hello team I have a question about this parameter catalogClusterEndPoints in Global Cache, which is the correct order for the ports? In ACE 11/12, when checking the server.conf.yaml sample file (install_directory\server\samples\globalcache\basic_2_catalogs_4_containers ...
That's awesome Yonder. Thanks for being part of the New to zSystems community and bringing your questions and sharing your experience and work with COBOL with the community. ------------------------------ ...
I haven't heard of any plans and didn't find an idea for it on our ideas portal. If it's important to the customer I would have them open an idea https://ibm-ai-apps.ideas.ibm.com/ideas/. Most of the new ...
Steve, Is there any plans to add OAUTH support for Inbound integrations as well? I am at a client that needs to use OAUTH for a custom logon/user creation authentication functionality into Maximo. ...