B2B Integration

Expand all | Collapse all

SI 6.0 Docker Image Installation error at setup database step

  • 1.  SI 6.0 Docker Image Installation error at setup database step

    Posted Thu June 06, 2019 03:06 PM
    ​Having issue installing SI 6.0 Docker image
    getting below error during installation at step setup the B2Bi database , here is the command
    docker run -e LICENSE="accept" -e TZ=America/Detroit -d --name=ProdB2BI --net=host -v /edi/SI/downloads/prereqs:/ibm/resources 1bcb26930832 b2bi_setup deploy_db

    Error message from the log...

    ': not a valid identifieriDockerStart.sh: line 65: export: `
    Please provide a valid number of seconds for soft stop timeout in the configurat                                      ion file

    ------------------------------
    MOHAMMED HAJI
    ------------------------------


  • 2.  RE: SI 6.0 Docker Image Installation error at setup database step

    Posted Fri June 07, 2019 04:48 AM
    Hi Mohammed,

    Check your setup.cfg (see https://www.ibm.com/support/knowledgecenter/en/SS3JSW_6.0.0/installing/installing/integrator/SI_Creating_setupcfg.html).

    What value do you have assigned to SOFT_STOP_TIMEOUT= ? It is optional so you can leave it out completely but if it's in there (like in the sample in the docs) you have to assign a value (number of seconds - recommendation is a minimum of 10).

    ------------------------------
    RICHARD CROSS
    ------------------------------



  • 3.  RE: SI 6.0 Docker Image Installation error at setup database step

    Posted Fri June 07, 2019 08:33 AM

    That's what I thought too , leaving SOFT_STOP_TIMEOUT blank, then it's complaining to enter a valid value , then I updated setup file with 360 (which is 6 minutes) still complaining the same.

    Have you tried without any entry and was it successful ?

     

    Regards

    MOHAMMED HAJI

    Digital Enablement Services

    (: 561.694.4228 | ): 248.659.7284 mohammed.haji@fpl.com

    Meeting Bridge: 305-552-3001 Participant Code: 62884425

    Description: NextEra Energy Logo

     






  • 4.  RE: SI 6.0 Docker Image Installation error at setup database step

    Posted Fri June 07, 2019 10:07 AM
    Hi Mohammed,

    Looks like a issue with setup.cfg file, could you please share the setup.cfg you created.

    Here is the product link for sample setup.cfg

    Regards,
    Girish

    ------------------------------
    Girish Venkatesh
    ------------------------------



  • 5.  RE: SI 6.0 Docker Image Installation error at setup database step

    Posted Fri June 07, 2019 11:27 AM
    Hi Mohammed,

    I ran into a similar issue when doing a docker installation a few months back.  If your setup.cfg file was created/modified/saved on a Windows machine then check if there are any Windows newline characters in the file; the installation process will fail if Windows newline characters exist.  Support had recommended the following to me:

    "I would suggest recreating the setup.cfg file under your Linux system directly. See what happens once you run that command again. Or you could just replace all \r\n newline characters with \n"


    Would suggest looking through your setup.cfg file, replace any Windows newline characters and see if that allows the command to complete.

    ------------------------------
    Chris Techter
    Principal Architect - CoEnterprise
    ------------------------------