API Connect

 View Only
  • 1.  Unable to access API Connect URL from browser for v5 API Connect

    Posted Tue July 05, 2022 10:34 AM
      |   view attached
    Hello Everyone,

    We tried to install v5 on local system when we check status after installing command on vm then showed system, Network & runtime status as UP.

    We used below command


    net set eth0 address (local IP) mask (mask address)
    net set gateway static gateway IP eth0.
    net set nameserver static gateway IP
    net set ntp static NTP ntp-IP address
    net set search none
    net restart

    Note: We don't configure NTP server on local system. We used some sample IP address for NTP server. So is this reason for unable to access api connect url from browser.

    Please find attachment for the same

    ------------------------------
    Akshay Sawant
    ------------------------------


  • 2.  RE: Unable to access API Connect URL from browser for v5 API Connect
    Best Answer

    Posted Wed July 06, 2022 03:26 AM
    Hiya,
    I assume you are aware that APIC v5 is now out of support ?

    192.168.* ip addresses are internal and cannot be routed to from outside that network, so unless your local browser IP address is also in that network you won't be able to reach it.
    Are you sure those are the right network settings to use?

    Is there a reason why you are using an out of support version instead of APIC v10 ?

    ------------------------------
    Chris Dudley
    ------------------------------



  • 3.  RE: Unable to access API Connect URL from browser for v5 API Connect

    Posted Wed July 06, 2022 05:56 AM
    Hello Chris,

    We are using right network setting. We know that v5 is out of support but some knowledge perspective we try  v5 our local system. 192.168.* IP address of local system so is any way to route IP for  access UI from browser? How we can access UI is any other way?

    ------------------------------
    Akshay Sawant
    ------------------------------



  • 4.  RE: Unable to access API Connect URL from browser for v5 API Connect

    Posted Mon July 11, 2022 01:05 AM
    192 address is not routable. Unless you are on the same network (not VPN) as the APIC node, you will not be able to access it.

    ------------------------------
    HAU NGUYEN
    ------------------------------