API Connect

 View Only
  • 1.  How to connect IBM Datapower Gateway with datapower operations dashboard

    Posted Wed September 28, 2022 07:20 AM

    Hello,
    I tried adding gateway in DPOD but i was getting an error( Could not connect to device, host address or port are incorrect) ,however my dpod is running on same ip as of DP.

    If anyone has any steps or documents to connect it ,please provide it.

    Thank you.



    ------------------------------
    Ashwin Iyer
    ------------------------------


  • 2.  RE: How to connect IBM Datapower Gateway with datapower operations dashboard

    Posted Thu September 29, 2022 06:53 AM
    does DPOD use the XMI or RMI ports to connect to datapower_ are those enabled_

    ------------------------------
    Matthias Siebler
    MA
    ------------------------------



  • 3.  RE: How to connect IBM Datapower Gateway with datapower operations dashboard

    Posted Thu September 29, 2022 09:09 AM
    Hi,
    I would start by making sure the network connectivity to/from DataPower.
    You can follow the instructions detailed here : DPOD documentation .
    Also make sure other needed configuration on the DataPower side are in place (documented on the same page).

     


    ------------------------------
    Shachar Greenberg
    ------------------------------



  • 4.  RE: How to connect IBM Datapower Gateway with datapower operations dashboard

    Posted Thu September 29, 2022 09:09 AM
    Hi,
    I would start by making sure the network connectivity from DPOD server to DataPower.
    You can follow the step described in DPOD documentation.
    Also make sure you configured other needed configurations on the DataPower side (detailed on the same page).

    ------------------------------
    Shachar Greenberg
    ------------------------------



  • 5.  RE: How to connect IBM Datapower Gateway with datapower operations dashboard

    Posted Fri September 30, 2022 02:10 AM
    Hi,

    You provided very little details about your installation. Please at least mention the version of DPOD, what type of installation, attach some screenshots, etc. The more details you provide the more help you'll get.

    Another suggestion - make sure you provide the SOMA port (usually 5550) and not the WebGUI port (9090).
    More details about adding a gateway to DPOD can be found here - https://montier.atlassian.net/wiki/spaces/DPOD011800/pages/15731262815/Adding+Monitored+Gateways

    ------------------------------
    Amit Munwes
    ------------------------------