AIOps

 View Only
Expand all | Collapse all

How to start nco_config Utility in WATSONAIOPS Openshift Deployment

  • 1.  How to start nco_config Utility in WATSONAIOPS Openshift Deployment

    Posted Mon June 20, 2022 12:38 AM

    Dear Team,
    nco_config Utility is used by Omnibus administrator to configure event Housekeeping, Scope based event grouping, DB triggers and more.

    When I logged into Omnibus pod "evtmanager-ncoprimary-0"
    I did not find the nco_config under /opt/IBM/tivoli/netcool/omnibus/bin as indicated below:
    [root@local-reg ~]# oc rsh -n ibmnoi evtmanager-ncoprimary-0
    sh-4.4$ cd /opt/IBM/tivoli/netcool/omnibus/bin
    sh-4.4$ ls -l
    total 60
    -r-xrwxr-x. 1 netcool root 2291 Mar 9 2021 nco_adduser
    lrwxrwxrwx. 1 netcool root 7 Mar 8 09:38 nco_aes_crypt -> nco_run
    lrwxrwxrwx. 1 netcool root 7 Mar 8 09:38 nco_check_store -> nco_run
    -r-xrwxr-x. 1 netcool root 11753 Mar 9 2021 nco_common
    lrwxrwxrwx. 1 netcool root 7 Mar 8 09:38 nco_crypt -> nco_run
    lrwxrwxrwx. 1 netcool root 7 Mar 8 09:38 nco_dbinit -> nco_run
    lrwxrwxrwx. 1 netcool root 7 Mar 8 09:38 nco_g_crypt -> nco_run
    lrwxrwxrwx. 1 netcool root 7 Mar 8 09:38 nco_get_login_token -> nco_run
    lrwxrwxrwx. 1 netcool root 7 Mar 8 09:38 nco_g_objserv_bi -> nco_run
    lrwxrwxrwx. 1 netcool root 7 Mar 8 09:38 nco_g_objserv_uni -> nco_run
    lrwxrwxrwx. 1 netcool root 7 Mar 8 09:38 nco_http -> nco_run
    -r-xrwxr-x. 1 netcool root 2139 Mar 9 2021 nco_icw
    -r-xrwxr-x. 1 netcool root 1400 Mar 9 2021 nco_id
    -r-xrwxr-x. 1 netcool root 6858 Mar 9 2021 nco_install_ospam
    lrwxrwxrwx. 1 netcool root 7 Mar 8 09:38 nco_keygen -> nco_run
    lrwxrwxrwx. 1 netcool root 7 Mar 8 09:38 nco_objserv -> nco_run
    lrwxrwxrwx. 1 netcool root 7 Mar 8 09:38 nco_pa_crypt -> nco_run
    lrwxrwxrwx. 1 netcool root 7 Mar 8 09:38 nco_ping -> nco_run
    -r-xrwxr-x. 1 netcool root 3218 Mar 9 2021 nco_probeeventfactory
    -r-xrwxr-x. 1 netcool root 2715 Mar 9 2021 nco_probereloadrules
    -r-xrwxr-x. 1 netcool root 2468 Mar 9 2021 nco_removeuser
    -r-xrwxr-x. 1 netcool root 2238 Mar 9 2021 nco_run
    -r-xrwxr-x. 1 netcool root 3120 Mar 9 2021 nco_setprobeprop
    -r-xrwxr-x. 1 netcool root 4248 Mar 9 2021 nco_sql
    lrwxrwxrwx. 1 netcool root 7 Mar 8 09:38 nco_sql_crypt -> nco_run
    lrwxrwxrwx. 1 netcool root 7 Mar 8 09:38 nco_store_resize -> nco_run
    lrwxrwxrwx. 1 netcool root 7 Mar 8 09:38 nco_version -> nco_run
    sh-4.4$

    How to lunch this tool when omnibus is part of a WATSONAIOPS openshift deployment?

    Thanks.




    ------------------------------
    Mohamed Hassan
    Fingerprint Consultancy
    ------------------------------


  • 2.  RE: How to start nco_config Utility in WATSONAIOPS Openshift Deployment

    Posted Mon June 20, 2022 10:02 AM

    Hi Mohamed

    That is correct - there are no GUI based tools shipped in the container.

    You can however use tools such as nco_config from a preexisting installation of OMNIbus and connect them to you OCP resident ObjectServer

    kind regards

    John



    ------------------------------
    john postoyko
    IBM
    London
    ------------------------------