Hi All,

After completing RDz Host customization steps, I have found some problem in TCP/IP.

when I issue ftp command on TSO, it returns:

*EZY2640I Using 'TCPIP.FTP.DATA' for local site configuration parameters.* *EZA1450I IBM FTP CS V1R11* *EZB3038E *** Can't initialize resolver.*

And, when I issue hometest command on TSO, it returns:

*EZA0619I Running IBM MVS TCP/IP CS V1R11 TCP/IP Configuration Tester* *EZA9416E Failure in procedure getstate for .FTP.DATA.* *EZA9411E Unable to allocate/open .FTP.DATA file, continuing.* *EZA0602I TCP Host Name is: ADCD* *EZA0604E Cannot use TCP/IP: No TCP/IP service available (8544)* *EZA0624I * * * Hometest failed - configuration error * * ** *EZA0625I Please correct your TCP/IP configuration and run this program again.*

Can anybody help me in resolving this issue, please.

Thanks,
Musaddiq

Hi Musaddiq,

Was TCPIP running previously? From your comments it sounds as if it was previously up and running and somehow became disabled.
Can you please send me your 'TCPIP.FTP.DATA'.

Thanks,
Domingo

Hi Domingo,

Thanks for your early response. Yes, you are thinking in the right way that TCP/IP was up and running but suddenly after installation of RDz Host and completing customizations steps, it was found that TCP/IP is not active.

The source of tcpip.ftp.data is as under:

;*********************************************************************** ; ;ANONYMOUS                     ; anonymous login accepted ;ASATRANS      FALSE           ; do NOT translate control characters ; in ASA text AUTOMOUNT     TRUE            ; automatic mount of unmounted volume AUTORECALL    TRUE            ; automatic recall of migrated data sets ;AUTOTAPEMOUNT FALSE           ; do NOT automatically mount tape volumes BLOCKSIZE     6233            ; new data set allocation blocksize CONDDISP      CATLG           ; data sets catalogued if transfer fails ;CTRLCONN      IBM-850         ; ascii code set for control connection ;DATACLASS     SMSDATA         ; sms data class name ;DB2           D31             ; db2 subsystem name ;DB2PLAN       PLANNAME        ; db2 plan name for OE-FTP ;DCBDSN        MODEL.DCB       ; new data set allocation model dcb name ;DEST          USER14@MVSL     ; files destination for store DIRECTORY     27              ; new data set allocation directory blocks DIRECTORYMODE FALSE           ; directorymode vs. data set mode FILETYPE      SEQ             ; file transfer mode INACTIVE      300             ; inactive time out JESLRECL      80              ; lrecl of jes jobs JESPUTGETTO   600             ; timeout for remote job submission put/ge JESRECFM      F               ; recfm of jes jobs LRECL         256             ; new data set allocation lrecl ;MGMTCLASS     SMSMGMT         ; sms mgmtclass name ;MIGRATEVOL    MIGRAT          ; migration volume volser PRIMARY       1               ; new data set allocation primary space ;QUOTESOVERRIDE FALSE         ; single quote(s) are treated as part of ; hfs filename, i.e. single quotes do ; NOT indicate working directory override RECFM         VB              ; new data set allocation record format ;RETPD         30              ; new data set retention period: 30 days SBDATACONN   (IBM-1047,IBM-850) ; ebcdic/ascii code sets for data conn. SECONDARY     1               ; new data set allocation secondary space ;SMF           STD             ; SMF records use standard subtypes ;SMFEXIT                       ; load SMF user exit FTPSMFEX ;SMFJES                        ; SMF recording when filetype=jes ;SMFSQL                        ; SMF recording when filetype=sql SPACETYPE     TRACK           ; new data set allocation space type SPREAD        FALSE           ; sql output format SQLCOL        NAMES           ; sql output uses column names as headings ;STARTDIR      MVS             ; use MVS directory at connect time ;STORCLASS     SMSSTOR         ; sms storclass name ;TRACE                         ; trace active ;TRAILINGBLANKS TRUE           ; include trailing blanks when fixed ; format data sets are retrieved ;UMASK         027             ; octal UMASK to restrict setting ; of permission bits when creating ; new hfs files ;UNITNAME      3380            ; new data set allocation unit ;VOLUME        WRKLB2          ; new data set allocation volume serial WRAPRECORD    FALSE           ; data is NOT wrapped to next record

Thanks,
Musaddiq

Hi Musaddiq,

Have you tried restarting TCPIP? Can you try issuing 'S TCPIP' to see if TCPIP will restart.

Domingo

I issued command "S TCPIP" on console and TCPIP started but after that when I gave same FTP and HOMETEST command on TSO then the result was the same( Not successful).

Thanks,
Musaddiq

Hi Musaddiq,

Have you tried re-ipling the system to see if it comes up clean. Also can you look in your syslog to see if there's any error MSGs or ABENDs pertaining to TCPIP.

Domingo

Hi,
I IPL the system again but on error is consistently present on console during IPL,

*13.57.196 STC00024 *EZZ9315E TCP/IP WAITING FOR RESOLVER TO INITIALIZE

We are stuck for last several days, will it be possible for you to come on Web meeting so as we may be able to go forward, please.

Thanks,
Musaddiq

Hi Musaddiq,

What do you have specified in the BPXPRMxx PARMLIB member for RESOLVER_PROC? Can you also verify that your datasets are APF authorized.

Domingo

I checked dataset "USER.PARMLIB" in APF authorization, it was not in the list then I gave it APF authorization by

SETPROG APF,ADD,DSNAME=USER.PARMLIB,VOLUME=SBSYS1

then I IPL the system but the problem still exists with the same message that TCPIP is wating for resolver to continue.

I am also sending you the BPXPRMxx code,

RESOLVER_PROC(RESOLVER) MAXASSIZE(2G) MAXPROCSYS(200) MAXPROCUSER(100) MAXUIDS(200) MAXFILEPROC(400) MAXPTYS(256) MAXTHREADTASKS(5000) MAXTHREADS(10000) MAXCPUTIME(7200) SUPERUSER(OMVSKERN) CTRACE(CTIBPX00) VERSION('&UNIXVER.') SYSPLEX(YES) FILESYSTYPE TYPE(HFS) ENTRYPOINT(GFUAINIT) FILESYSTYPE TYPE(UDS) ENTRYPOINT(BPXTUINT) ROOT     FILESYSTEM('HFS.&SYSPLEX..ROOT') TYPE(HFS) MODE(RDWR) MOUNT    FILESYSTEM('HFS.&SYSNAME..HFS') TYPE(HFS) MODE(RDWR) NOAUTOMOVE MOUNTPOINT('/&SYSNAME.') MOUNT    FILESYSTEM('ZFS.&UNIXVER..VERSION.ZFS') TYPE(ZFS) MODE(RDWR) MOUNTPOINT('/$VERSION') MOUNT    FILESYSTEM('ZFS.&SYSNAME..DEV') TYPE(ZFS) MODE(RDWR) NOAUTOMOVE MOUNTPOINT('/&SYSNAME./dev') MOUNT    FILESYSTEM('ZFS.&SYSNAME..VAR') TYPE(ZFS) MODE(RDWR) NOAUTOMOVE MOUNTPOINT('/&SYSNAME./var') MOUNT    FILESYSTEM('ZFS.&SYSNAME..VARWBEM') TYPE(ZFS) MODE(RDWR) NOAUTOMOVE MOUNTPOINT('/&SYSNAME./var/wbem') MOUNT    FILESYSTEM('HFS.&SYSNAME..ETC') TYPE(HFS) MODE(RDWR) NOAUTOMOVE MOUNTPOINT('/&SYSNAME./etc') MOUNT    FILESYSTEM('CUST.HFS.TMP') TYPE(HFS) MODE(RDWR) NOAUTOMOVE MOUNTPOINT('/&SYSNAME./tmp') MOUNT    FILESYSTEM('HFS.&SYSNAME..USR.MAIL') TYPE(HFS) MODE(RDWR) MOUNTPOINT('/usr/mail') MOUNT    FILESYSTEM('CUST.HFS.U') TYPE(HFS) MODE(RDWR) MOUNTPOINT('/u') MOUNT    FILESYSTEM('DSN910.SDSNAZFS') TYPE(ZFS) MODE(RDWR) MOUNTPOINT('/usr/lpp/db2910_base') MOUNT    FILESYSTEM('DSN910.SDSNJCC') TYPE(ZFS) MODE(RDWR) MOUNTPOINT('/usr/lpp/db2910_jdbc') MOUNT    FILESYSTEM('DSN910.SDSNMQLS') TYPE(ZFS) MODE(RDWR) MOUNTPOINT('/usr/lpp/db2910_mql') MOUNT    FILESYSTEM('DSN910.SDSNWORF') TYPE(ZFS) MODE(RDWR) MOUNTPOINT('/usr/lpp/db2910_worf') MOUNT    FILESYSTEM('DAH910.ADAHZFS1') TYPE(ZFS) MODE(RDWR) PARM('AGGRGROW') MOUNTPOINT('/usr/lpp/db2910_das') MOUNT    FILESYSTEM('DSN910.SJVAZFS') TYPE(ZFS) MODE(RDWR) MOUNTPOINT('/u/db9g') MOUNT    FILESYSTEM('ACD211.SACDZFS1') TYPE(ZFS) MODE(RDWR) MOUNTPOINT('/usr/lpp/jcct4v3') MOUNT    FILESYSTEM('HFS.&SYSNAME..WEB') TYPE(HFS) MODE(RDWR) MOUNTPOINT('/web') MOUNT  FILESYSTEM('DFH410.ZFS') TYPE(ZFS) MODE(RDWR) MOUNTPOINT('/usr/lpp/cicsts/cicsts41') MOUNT  FILESYSTEM('NET530.HFS') MOUNTPOINT('/usr/lpp/netview') TYPE(HFS) MODE(RDWR) MOUNT  FILESYSTEM('IGY420.HFS') MOUNTPOINT('/usr/lpp/cobol') TYPE(HFS) MODE(RDWR) MOUNT  FILESYSTEM('IEL390.HFS') MOUNTPOINT('/usr/lpp/pli') TYPE(HFS) MODE(RDWR) MOUNT  FILESYSTEM('CSQ700.MQM.HFS') TYPE(HFS) MODE(READ) MOUNTPOINT('/usr/lpp/mqm/V7R0M0') MOUNT    FILESYSTEM('JVA600.HFS') TYPE(HFS) MODE(RDWR) MOUNTPOINT('/usr/lpp/java') d ===>                                                  Scroll = MOUNT    FILESYSTEM('RDZ76.OMVS.V76') TYPE(ZFS) MODE(RDWR) MOUNTPOINT('/usr/lpp/rdz') FILESYSTYPE TYPE(AUTOMNT) ENTRYPOINT(BPXTAMD) FILESYSTYPE TYPE(ZFS) ENTRYPOINT(IOEFSCM) ASNAME(ZFS) FILESYSTYPE TYPE(NFS) ENTRYPOINT(GFSCINIT) ASNAME(NFSC) FILESYSTYPE TYPE(INET) ENTRYPOINT(EZBPFINI) SUBFILESYSTYPE NAME(TCPIP) TYPE(INET) ENTRYPOINT(EZBPFINI) NETWORK DOMAINNAME(AF_INET) DOMAINNUMBER(2) MAXSOCKETS(30000) TYPE(INET) INADDRANYPORT(5555) INADDRANYCOUNT(1000) NETWORK DOMAINNAME(AF_UNIX) DOMAINNUMBER(1) MAXSOCKETS(2000) TYPE(UDS)

Thanks,
Musaddiq

Hi Musaddiq,

Have you verified that the RESOLVER has indeed started? Can you also look in the syslog to see if there's any additional MSGs.

Thanks,
Domingo