Hi,

maybe some has an additional idea, very strange behavior with data modules.

We have an existing and working report based on a data module
which was build with datasets. In addition we use the cognos gregorian calender
within this data module for relative time dimension. Everything works fine for our user.

Now we duplicated the report and the data module (same system, same folder, same user rights)
and just replaced a data set (but with same structure, same columns - we only changed the data source in the back).

If the same user (which can run the 1. Report) trying to run the new one, he can open the report, the prompt page
will show up and after selecting von object and hit the run button we get the message:

XQE-V5-0005 Identifizierung wurde nicht gefunden: '_row_id'. CAF-WRN-2082

"_row_id" is a column of the gregorian calender whcih was not changed or touched. 

As a administrator u can run the report without any error. 
Strange that a user can klick the report and the prompt page is shown that from my view there is no problem with the user rights.

Any idea? I already opened a case but maybe the community is quicker ;-)

Thanks in advance

------------------------------
Andreas Wycisk
------------------------------

#CognosAnalyticswithWatson

Hi Andreas,

I might look like the solution from the following link:


------------------------------
Patrick Neveu
Positive Thinking Company
------------------------------

Original Message:
Sent: Tue April 05, 2022 08:22 AM
From: Andreas Wycisk
Subject: data module error: XQE-V5-0005

Hi,

maybe some has an additional idea, very strange behavior with data modules.

We have an existing and working report based on a data module
which was build with datasets. In addition we use the cognos gregorian calender
within this data module for relative time dimension. Everything works fine for our user.

Now we duplicated the report and the data module (same system, same folder, same user rights)
and just replaced a data set (but with same structure, same columns - we only changed the data source in the back).

If the same user (which can run the 1. Report) trying to run the new one, he can open the report, the prompt page
will show up and after selecting von object and hit the run button we get the message:

XQE-V5-0005 Identifizierung wurde nicht gefunden: '_row_id'. CAF-WRN-2082

"_row_id" is a column of the gregorian calender whcih was not changed or touched. 

As a administrator u can run the report without any error. 
Strange that a user can klick the report and the prompt page is shown that from my view there is no problem with the user rights.

Any idea? I already opened a case but maybe the community is quicker ;-)

Thanks in advance

------------------------------
Andreas Wycisk
------------------------------
#CognosAnalyticswithWatson

Hi Patrick,

thanks for your answer. This is why i call it: "strange behaviour". 
Nothing was changed, no upgrade, no different calender - it was just a copy of an
existing data module and a -re-link to the adjusted dataset.

In the data module there is no validation error.

I will check your link and make an update here.

------------------------------
Andreas Wycisk
------------------------------

Original Message:
Sent: Tue April 05, 2022 08:42 AM
From: Patrick Neveu
Subject: data module error: XQE-V5-0005

Hi Andreas,

I might look like the solution from the following link:

https://www.ibm.com/support/pages/node/6552614

Updated with this question: did you upgrade from v11.1.x to v11.2.x?

Best regards,

------------------------------
Patrick Neveu
Positive Thinking Company

Original Message:
Sent: Tue April 05, 2022 08:22 AM
From: Andreas Wycisk
Subject: data module error: XQE-V5-0005

Hi,

maybe some has an additional idea, very strange behavior with data modules.

We have an existing and working report based on a data module
which was build with datasets. In addition we use the cognos gregorian calender
within this data module for relative time dimension. Everything works fine for our user.

Now we duplicated the report and the data module (same system, same folder, same user rights)
and just replaced a data set (but with same structure, same columns - we only changed the data source in the back).

If the same user (which can run the 1. Report) trying to run the new one, he can open the report, the prompt page
will show up and after selecting von object and hit the run button we get the message:

XQE-V5-0005 Identifizierung wurde nicht gefunden: '_row_id'. CAF-WRN-2082

"_row_id" is a column of the gregorian calender whcih was not changed or touched. 

As a administrator u can run the report without any error. 
Strange that a user can klick the report and the prompt page is shown that from my view there is no problem with the user rights.

Any idea? I already opened a case but maybe the community is quicker ;-)

Thanks in advance

------------------------------
Andreas Wycisk
------------------------------
#CognosAnalyticswithWatson

Hi Patrick,

there is also this one: https://www.ibm.com/support/pages/xqe-v5-0005-xxxx-identifier-not-found
TLDR: Ensure the Data Server Connection in your  connection have RUN permission for EVERYONE or for the desired users




------------------------------
Ralf Roeber
https://linkedin.com/in/ralf-roeber-470425a/
------------------------------

Original Message:
Sent: Tue April 05, 2022 09:00 AM
From: Andreas Wycisk
Subject: data module error: XQE-V5-0005

Hi Patrick,

thanks for your answer. This is why i call it: "strange behaviour". 
Nothing was changed, no upgrade, no different calender - it was just a copy of an
existing data module and a -re-link to the adjusted dataset.

In the data module there is no validation error.

I will check your link and make an update here.

------------------------------
Andreas Wycisk

Original Message:
Sent: Tue April 05, 2022 08:42 AM
From: Patrick Neveu
Subject: data module error: XQE-V5-0005

Hi Andreas,

I might look like the solution from the following link:

https://www.ibm.com/support/pages/node/6552614

Updated with this question: did you upgrade from v11.1.x to v11.2.x?

Best regards,

------------------------------
Patrick Neveu
Positive Thinking Company

Original Message:
Sent: Tue April 05, 2022 08:22 AM
From: Andreas Wycisk
Subject: data module error: XQE-V5-0005

Hi,

maybe some has an additional idea, very strange behavior with data modules.

We have an existing and working report based on a data module
which was build with datasets. In addition we use the cognos gregorian calender
within this data module for relative time dimension. Everything works fine for our user.

Now we duplicated the report and the data module (same system, same folder, same user rights)
and just replaced a data set (but with same structure, same columns - we only changed the data source in the back).

If the same user (which can run the 1. Report) trying to run the new one, he can open the report, the prompt page
will show up and after selecting von object and hit the run button we get the message:

XQE-V5-0005 Identifizierung wurde nicht gefunden: '_row_id'. CAF-WRN-2082

"_row_id" is a column of the gregorian calender whcih was not changed or touched. 

As a administrator u can run the report without any error. 
Strange that a user can klick the report and the prompt page is shown that from my view there is no problem with the user rights.

Any idea? I already opened a case but maybe the community is quicker ;-)

Thanks in advance

------------------------------
Andreas Wycisk
------------------------------
#CognosAnalyticswithWatson

Hi Patrick,

thanks for the link.

i allready checked this and added directly (just to test it) the respective group of the user to the data server connection with RUN permission.

Unfortunately no change.

------------------------------
Andreas Wycisk
------------------------------

Original Message:
Sent: Tue April 05, 2022 09:16 AM
From: Ralf Roeber
Subject: data module error: XQE-V5-0005

Hi Patrick,

there is also this one: https://www.ibm.com/support/pages/xqe-v5-0005-xxxx-identifier-not-found
TLDR: Ensure the Data Server Connection in your  connection have RUN permission for EVERYONE or for the desired users




------------------------------
Ralf Roeber
https://linkedin.com/in/ralf-roeber-470425a/

Original Message:
Sent: Tue April 05, 2022 09:00 AM
From: Andreas Wycisk
Subject: data module error: XQE-V5-0005

Hi Patrick,

thanks for your answer. This is why i call it: "strange behaviour". 
Nothing was changed, no upgrade, no different calender - it was just a copy of an
existing data module and a -re-link to the adjusted dataset.

In the data module there is no validation error.

I will check your link and make an update here.

------------------------------
Andreas Wycisk

Original Message:
Sent: Tue April 05, 2022 08:42 AM
From: Patrick Neveu
Subject: data module error: XQE-V5-0005

Hi Andreas,

I might look like the solution from the following link:

https://www.ibm.com/support/pages/node/6552614

Updated with this question: did you upgrade from v11.1.x to v11.2.x?

Best regards,

------------------------------
Patrick Neveu
Positive Thinking Company

Original Message:
Sent: Tue April 05, 2022 08:22 AM
From: Andreas Wycisk
Subject: data module error: XQE-V5-0005

Hi,

maybe some has an additional idea, very strange behavior with data modules.

We have an existing and working report based on a data module
which was build with datasets. In addition we use the cognos gregorian calender
within this data module for relative time dimension. Everything works fine for our user.

Now we duplicated the report and the data module (same system, same folder, same user rights)
and just replaced a data set (but with same structure, same columns - we only changed the data source in the back).

If the same user (which can run the 1. Report) trying to run the new one, he can open the report, the prompt page
will show up and after selecting von object and hit the run button we get the message:

XQE-V5-0005 Identifizierung wurde nicht gefunden: '_row_id'. CAF-WRN-2082

"_row_id" is a column of the gregorian calender whcih was not changed or touched. 

As a administrator u can run the report without any error. 
Strange that a user can klick the report and the prompt page is shown that from my view there is no problem with the user rights.

Any idea? I already opened a case but maybe the community is quicker ;-)

Thanks in advance

------------------------------
Andreas Wycisk
------------------------------
#CognosAnalyticswithWatson