Maximo

Hello,

We're looking to upgrade our ArcGIS Server to version 11.1.    Our Maximo Spatial version is currently at 7.6.1.0.

IBM's Maximo Spatial docs don't list this combination as supported: 

Maximo Spatial System Requirements

But is anyone out there already using ArcGIS Server 11.x successfully with Maximo Spatial? Specifically with Spatial v7.6.1.0?

We'd appreciate hearing whether it's working for you or if you came across any issues.

Thanks in advance,

Ryan

Hi Ryan,

I took a look at that doc you referenced in your post. What is limitation to trading up to MAS 8.6? I realize that is a loaded question. 8.6 is the only listed version that handles ESRI 11.0 and Maximo EAM 7.6.1.x is going end of life in a relatively short period of time. I am thinking it is likely you are going in that direction soon anyway, yes? If not (i.e. you have no plans to upgrade in the next 24 months) why not? Is a technically not supported combination worth the risk to your business? Or to phrase it differently is the risk less than the cost of the upgrade?  I am curious as to your reasoning here.

Hello,

We're looking to upgrade our ArcGIS Server to version 11.1.    Our Maximo Spatial version is currently at 7.6.1.0.

IBM's Maximo Spatial docs don't list this combination as supported: 

Maximo Spatial System Requirements

But is anyone out there already using ArcGIS Server 11.x successfully with Maximo Spatial? Specifically with Spatial v7.6.1.0?

We'd appreciate hearing whether it's working for you or if you came across any issues.

Thanks in advance,

Ryan

Hi Bradley,

Yes, we'll be moving towards MAS soon. But not before we will need to upgrade our ArcGIS. So I'm hoping someone out there already has experience with the combination of ArcGIS 11.x and Maximo Spatial 7.6.1.0 and can share their findings.

Hi Ryan,

I took a look at that doc you referenced in your post. What is limitation to trading up to MAS 8.6? I realize that is a loaded question. 8.6 is the only listed version that handles ESRI 11.0 and Maximo EAM 7.6.1.x is going end of life in a relatively short period of time. I am thinking it is likely you are going in that direction soon anyway, yes? If not (i.e. you have no plans to upgrade in the next 24 months) why not? Is a technically not supported combination worth the risk to your business? Or to phrase it differently is the risk less than the cost of the upgrade?  I am curious as to your reasoning here.

Hello,

We're looking to upgrade our ArcGIS Server to version 11.1.    Our Maximo Spatial version is currently at 7.6.1.0.

IBM's Maximo Spatial docs don't list this combination as supported: 

Maximo Spatial System Requirements

But is anyone out there already using ArcGIS Server 11.x successfully with Maximo Spatial? Specifically with Spatial v7.6.1.0?

We'd appreciate hearing whether it's working for you or if you came across any issues.

Thanks in advance,

Ryan

Hi Bradley,

Yes, we'll be moving towards MAS soon. But not before we will need to upgrade our ArcGIS. So I'm hoping someone out there already has experience with the combination of ArcGIS 11.x and Maximo Spatial 7.6.1.0 and can share their findings.

Hi Ryan,

I took a look at that doc you referenced in your post. What is limitation to trading up to MAS 8.6? I realize that is a loaded question. 8.6 is the only listed version that handles ESRI 11.0 and Maximo EAM 7.6.1.x is going end of life in a relatively short period of time. I am thinking it is likely you are going in that direction soon anyway, yes? If not (i.e. you have no plans to upgrade in the next 24 months) why not? Is a technically not supported combination worth the risk to your business? Or to phrase it differently is the risk less than the cost of the upgrade?  I am curious as to your reasoning here.

Hello,

We're looking to upgrade our ArcGIS Server to version 11.1.    Our Maximo Spatial version is currently at 7.6.1.0.

IBM's Maximo Spatial docs don't list this combination as supported: 

Maximo Spatial System Requirements

But is anyone out there already using ArcGIS Server 11.x successfully with Maximo Spatial? Specifically with Spatial v7.6.1.0?

We'd appreciate hearing whether it's working for you or if you came across any issues.

Thanks in advance,

Ryan

Hi Ryan,

I talked with the Spatial Product Manager this morning for an update.  We are currently testing with ArcGIS 11.1 for our MAS 8.11 release and plan to back port that support to Spatial 7.6.1 as well.  You will likely see this certification with 7.6.1 in the October timeframe as MAS 8.11 is planned for September release.  

Hi Bradley,

Yes, we'll be moving towards MAS soon. But not before we will need to upgrade our ArcGIS. So I'm hoping someone out there already has experience with the combination of ArcGIS 11.x and Maximo Spatial 7.6.1.0 and can share their findings.

Hi Ryan,

I took a look at that doc you referenced in your post. What is limitation to trading up to MAS 8.6? I realize that is a loaded question. 8.6 is the only listed version that handles ESRI 11.0 and Maximo EAM 7.6.1.x is going end of life in a relatively short period of time. I am thinking it is likely you are going in that direction soon anyway, yes? If not (i.e. you have no plans to upgrade in the next 24 months) why not? Is a technically not supported combination worth the risk to your business? Or to phrase it differently is the risk less than the cost of the upgrade?  I am curious as to your reasoning here.

Hello,

We're looking to upgrade our ArcGIS Server to version 11.1.    Our Maximo Spatial version is currently at 7.6.1.0.

IBM's Maximo Spatial docs don't list this combination as supported: 

Maximo Spatial System Requirements

But is anyone out there already using ArcGIS Server 11.x successfully with Maximo Spatial? Specifically with Spatial v7.6.1.0?

We'd appreciate hearing whether it's working for you or if you came across any issues.

Thanks in advance,

Ryan

Hi Ryan,

I talked with the Spatial Product Manager this morning for an update.  We are currently testing with ArcGIS 11.1 for our MAS 8.11 release and plan to back port that support to Spatial 7.6.1 as well.  You will likely see this certification with 7.6.1 in the October timeframe as MAS 8.11 is planned for September release.  

Hi Bradley,

Yes, we'll be moving towards MAS soon. But not before we will need to upgrade our ArcGIS. So I'm hoping someone out there already has experience with the combination of ArcGIS 11.x and Maximo Spatial 7.6.1.0 and can share their findings.

Hi Ryan,

I took a look at that doc you referenced in your post. What is limitation to trading up to MAS 8.6? I realize that is a loaded question. 8.6 is the only listed version that handles ESRI 11.0 and Maximo EAM 7.6.1.x is going end of life in a relatively short period of time. I am thinking it is likely you are going in that direction soon anyway, yes? If not (i.e. you have no plans to upgrade in the next 24 months) why not? Is a technically not supported combination worth the risk to your business? Or to phrase it differently is the risk less than the cost of the upgrade?  I am curious as to your reasoning here.

Hello,

We're looking to upgrade our ArcGIS Server to version 11.1.    Our Maximo Spatial version is currently at 7.6.1.0.

IBM's Maximo Spatial docs don't list this combination as supported: 

Maximo Spatial System Requirements

But is anyone out there already using ArcGIS Server 11.x successfully with Maximo Spatial? Specifically with Spatial v7.6.1.0?

We'd appreciate hearing whether it's working for you or if you came across any issues.

Thanks in advance,

Ryan

Hi Lacey,

Great to see that Spatial 7.6.1 is going to receive support ArcGIS 11.1. We find ourselves in a very similar position to the Ryan; would you be able to provide any update as to when we might see the certification for 7.6.1?

Hi Ryan,

I talked with the Spatial Product Manager this morning for an update.  We are currently testing with ArcGIS 11.1 for our MAS 8.11 release and plan to back port that support to Spatial 7.6.1 as well.  You will likely see this certification with 7.6.1 in the October timeframe as MAS 8.11 is planned for September release.  

Hi Bradley,

Yes, we'll be moving towards MAS soon. But not before we will need to upgrade our ArcGIS. So I'm hoping someone out there already has experience with the combination of ArcGIS 11.x and Maximo Spatial 7.6.1.0 and can share their findings.

Hi Ryan,

I took a look at that doc you referenced in your post. What is limitation to trading up to MAS 8.6? I realize that is a loaded question. 8.6 is the only listed version that handles ESRI 11.0 and Maximo EAM 7.6.1.x is going end of life in a relatively short period of time. I am thinking it is likely you are going in that direction soon anyway, yes? If not (i.e. you have no plans to upgrade in the next 24 months) why not? Is a technically not supported combination worth the risk to your business? Or to phrase it differently is the risk less than the cost of the upgrade?  I am curious as to your reasoning here.

Hello,

We're looking to upgrade our ArcGIS Server to version 11.1.    Our Maximo Spatial version is currently at 7.6.1.0.

IBM's Maximo Spatial docs don't list this combination as supported: 

Maximo Spatial System Requirements

But is anyone out there already using ArcGIS Server 11.x successfully with Maximo Spatial? Specifically with Spatial v7.6.1.0?

We'd appreciate hearing whether it's working for you or if you came across any issues.

Thanks in advance,

Ryan

Hi,

I just checked in with the Product Manager.  Support for ArcGIS 11.1 will be included with Maximo 7.6.1.3 and Spatial 7.6.1 with the iFix that is released end of this month, September.  I'll check back in after the iFix is released and verify. 

Hi Lacey,

Great to see that Spatial 7.6.1 is going to receive support ArcGIS 11.1. We find ourselves in a very similar position to the Ryan; would you be able to provide any update as to when we might see the certification for 7.6.1?

Hi Ryan,

I talked with the Spatial Product Manager this morning for an update.  We are currently testing with ArcGIS 11.1 for our MAS 8.11 release and plan to back port that support to Spatial 7.6.1 as well.  You will likely see this certification with 7.6.1 in the October timeframe as MAS 8.11 is planned for September release.  

Hi Bradley,

Yes, we'll be moving towards MAS soon. But not before we will need to upgrade our ArcGIS. So I'm hoping someone out there already has experience with the combination of ArcGIS 11.x and Maximo Spatial 7.6.1.0 and can share their findings.

Hi Ryan,

I took a look at that doc you referenced in your post. What is limitation to trading up to MAS 8.6? I realize that is a loaded question. 8.6 is the only listed version that handles ESRI 11.0 and Maximo EAM 7.6.1.x is going end of life in a relatively short period of time. I am thinking it is likely you are going in that direction soon anyway, yes? If not (i.e. you have no plans to upgrade in the next 24 months) why not? Is a technically not supported combination worth the risk to your business? Or to phrase it differently is the risk less than the cost of the upgrade?  I am curious as to your reasoning here.

Hello,

We're looking to upgrade our ArcGIS Server to version 11.1.    Our Maximo Spatial version is currently at 7.6.1.0.

IBM's Maximo Spatial docs don't list this combination as supported: 

Maximo Spatial System Requirements

But is anyone out there already using ArcGIS Server 11.x successfully with Maximo Spatial? Specifically with Spatial v7.6.1.0?

We'd appreciate hearing whether it's working for you or if you came across any issues.

Thanks in advance,

Ryan

Hi,

I just checked in with the Product Manager.  Support for ArcGIS 11.1 will be included with Maximo 7.6.1.3 and Spatial 7.6.1 with the iFix that is released end of this month, September.  I'll check back in after the iFix is released and verify. 

Hi Lacey,

Great to see that Spatial 7.6.1 is going to receive support ArcGIS 11.1. We find ourselves in a very similar position to the Ryan; would you be able to provide any update as to when we might see the certification for 7.6.1?

Hi Ryan,

I talked with the Spatial Product Manager this morning for an update.  We are currently testing with ArcGIS 11.1 for our MAS 8.11 release and plan to back port that support to Spatial 7.6.1 as well.  You will likely see this certification with 7.6.1 in the October timeframe as MAS 8.11 is planned for September release.  

Hi Bradley,

Yes, we'll be moving towards MAS soon. But not before we will need to upgrade our ArcGIS. So I'm hoping someone out there already has experience with the combination of ArcGIS 11.x and Maximo Spatial 7.6.1.0 and can share their findings.

Hi Ryan,

I took a look at that doc you referenced in your post. What is limitation to trading up to MAS 8.6? I realize that is a loaded question. 8.6 is the only listed version that handles ESRI 11.0 and Maximo EAM 7.6.1.x is going end of life in a relatively short period of time. I am thinking it is likely you are going in that direction soon anyway, yes? If not (i.e. you have no plans to upgrade in the next 24 months) why not? Is a technically not supported combination worth the risk to your business? Or to phrase it differently is the risk less than the cost of the upgrade?  I am curious as to your reasoning here.

Hello,

We're looking to upgrade our ArcGIS Server to version 11.1.    Our Maximo Spatial version is currently at 7.6.1.0.

IBM's Maximo Spatial docs don't list this combination as supported: 

Maximo Spatial System Requirements

But is anyone out there already using ArcGIS Server 11.x successfully with Maximo Spatial? Specifically with Spatial v7.6.1.0?

We'd appreciate hearing whether it's working for you or if you came across any issues.

Thanks in advance,

Ryan

Hi Lacey,

Would you have any further update to this? We recently updated our system with the latest Maximo 7.6.1.3 and Spatial 7.6.1 and it does not appear that the compatibility for ArcGIS 11.1 has been enabled.

Any help or advice is much appreciated.

Hi,

I just checked in with the Product Manager.  Support for ArcGIS 11.1 will be included with Maximo 7.6.1.3 and Spatial 7.6.1 with the iFix that is released end of this month, September.  I'll check back in after the iFix is released and verify. 

Hi Lacey,

Great to see that Spatial 7.6.1 is going to receive support ArcGIS 11.1. We find ourselves in a very similar position to the Ryan; would you be able to provide any update as to when we might see the certification for 7.6.1?

Hi Ryan,

I talked with the Spatial Product Manager this morning for an update.  We are currently testing with ArcGIS 11.1 for our MAS 8.11 release and plan to back port that support to Spatial 7.6.1 as well.  You will likely see this certification with 7.6.1 in the October timeframe as MAS 8.11 is planned for September release.  

Hi Bradley,

Yes, we'll be moving towards MAS soon. But not before we will need to upgrade our ArcGIS. So I'm hoping someone out there already has experience with the combination of ArcGIS 11.x and Maximo Spatial 7.6.1.0 and can share their findings.

Hi Ryan,

I took a look at that doc you referenced in your post. What is limitation to trading up to MAS 8.6? I realize that is a loaded question. 8.6 is the only listed version that handles ESRI 11.0 and Maximo EAM 7.6.1.x is going end of life in a relatively short period of time. I am thinking it is likely you are going in that direction soon anyway, yes? If not (i.e. you have no plans to upgrade in the next 24 months) why not? Is a technically not supported combination worth the risk to your business? Or to phrase it differently is the risk less than the cost of the upgrade?  I am curious as to your reasoning here.

Hello,

We're looking to upgrade our ArcGIS Server to version 11.1.    Our Maximo Spatial version is currently at 7.6.1.0.

IBM's Maximo Spatial docs don't list this combination as supported: 

Maximo Spatial System Requirements

But is anyone out there already using ArcGIS Server 11.x successfully with Maximo Spatial? Specifically with Spatial v7.6.1.0?

We'd appreciate hearing whether it's working for you or if you came across any issues.

Thanks in advance,

Ryan

Thanks for the update Mark. Do you know what specific functions of Maximo Spatial isn't working for you?  (embedded mapping, asset/location inbound integration from GIS, outbound integration of edits to GIS?)

Hi Lacey,

Would you have any further update to this? We recently updated our system with the latest Maximo 7.6.1.3 and Spatial 7.6.1 and it does not appear that the compatibility for ArcGIS 11.1 has been enabled.

Any help or advice is much appreciated.

Hi,

I just checked in with the Product Manager.  Support for ArcGIS 11.1 will be included with Maximo 7.6.1.3 and Spatial 7.6.1 with the iFix that is released end of this month, September.  I'll check back in after the iFix is released and verify. 

Hi Lacey,

Great to see that Spatial 7.6.1 is going to receive support ArcGIS 11.1. We find ourselves in a very similar position to the Ryan; would you be able to provide any update as to when we might see the certification for 7.6.1?

Hi Ryan,

I talked with the Spatial Product Manager this morning for an update.  We are currently testing with ArcGIS 11.1 for our MAS 8.11 release and plan to back port that support to Spatial 7.6.1 as well.  You will likely see this certification with 7.6.1 in the October timeframe as MAS 8.11 is planned for September release.  

Hi Bradley,

Yes, we'll be moving towards MAS soon. But not before we will need to upgrade our ArcGIS. So I'm hoping someone out there already has experience with the combination of ArcGIS 11.x and Maximo Spatial 7.6.1.0 and can share their findings.

Hi Ryan,

I took a look at that doc you referenced in your post. What is limitation to trading up to MAS 8.6? I realize that is a loaded question. 8.6 is the only listed version that handles ESRI 11.0 and Maximo EAM 7.6.1.x is going end of life in a relatively short period of time. I am thinking it is likely you are going in that direction soon anyway, yes? If not (i.e. you have no plans to upgrade in the next 24 months) why not? Is a technically not supported combination worth the risk to your business? Or to phrase it differently is the risk less than the cost of the upgrade?  I am curious as to your reasoning here.

Hello,

We're looking to upgrade our ArcGIS Server to version 11.1.    Our Maximo Spatial version is currently at 7.6.1.0.

IBM's Maximo Spatial docs don't list this combination as supported: 

Maximo Spatial System Requirements

But is anyone out there already using ArcGIS Server 11.x successfully with Maximo Spatial? Specifically with Spatial v7.6.1.0?

We'd appreciate hearing whether it's working for you or if you came across any issues.

Thanks in advance,

Ryan

Thanks for the update Mark. Do you know what specific functions of Maximo Spatial isn't working for you?  (embedded mapping, asset/location inbound integration from GIS, outbound integration of edits to GIS?)

Hi Lacey,

Would you have any further update to this? We recently updated our system with the latest Maximo 7.6.1.3 and Spatial 7.6.1 and it does not appear that the compatibility for ArcGIS 11.1 has been enabled.

Any help or advice is much appreciated.

Hi,

I just checked in with the Product Manager.  Support for ArcGIS 11.1 will be included with Maximo 7.6.1.3 and Spatial 7.6.1 with the iFix that is released end of this month, September.  I'll check back in after the iFix is released and verify. 

Hi Lacey,

Great to see that Spatial 7.6.1 is going to receive support ArcGIS 11.1. We find ourselves in a very similar position to the Ryan; would you be able to provide any update as to when we might see the certification for 7.6.1?

Hi Ryan,

I talked with the Spatial Product Manager this morning for an update.  We are currently testing with ArcGIS 11.1 for our MAS 8.11 release and plan to back port that support to Spatial 7.6.1 as well.  You will likely see this certification with 7.6.1 in the October timeframe as MAS 8.11 is planned for September release.  

Hi Bradley,

Yes, we'll be moving towards MAS soon. But not before we will need to upgrade our ArcGIS. So I'm hoping someone out there already has experience with the combination of ArcGIS 11.x and Maximo Spatial 7.6.1.0 and can share their findings.

Hi Ryan,

I took a look at that doc you referenced in your post. What is limitation to trading up to MAS 8.6? I realize that is a loaded question. 8.6 is the only listed version that handles ESRI 11.0 and Maximo EAM 7.6.1.x is going end of life in a relatively short period of time. I am thinking it is likely you are going in that direction soon anyway, yes? If not (i.e. you have no plans to upgrade in the next 24 months) why not? Is a technically not supported combination worth the risk to your business? Or to phrase it differently is the risk less than the cost of the upgrade?  I am curious as to your reasoning here.

Hello,

We're looking to upgrade our ArcGIS Server to version 11.1.    Our Maximo Spatial version is currently at 7.6.1.0.

IBM's Maximo Spatial docs don't list this combination as supported: 

Maximo Spatial System Requirements

But is anyone out there already using ArcGIS Server 11.x successfully with Maximo Spatial? Specifically with Spatial v7.6.1.0?

We'd appreciate hearing whether it's working for you or if you came across any issues.

Thanks in advance,

Ryan

Hi,

Our Spatial Development group is finalizing the testing to verify if there are any issues with supporting ArcGIS 11.1.   Plan is to have testing finishing by end of November (so a little over a week).  If no issues are found, then we will update the System Requirements to include support for ArcGIS 11.1 with Maximo 7.6.1.3 and Spatial 7.6.1.1.  If issues are found, we will address them through an iFix. 

Send me an email at lacey.lurges@us.ibm.com to tell us more about the issues you are facing so we can help.  You may need a formal support ticket as well.  If the issue is caused by changes in ArcGIS 11.1 then there will need to be a fix. 

I'll update this thread once 11.1 is officially supported. 

System Requirements for IBM Maximo Spatial Asset Management

Thanks for the update Mark. Do you know what specific functions of Maximo Spatial isn't working for you?  (embedded mapping, asset/location inbound integration from GIS, outbound integration of edits to GIS?)

Hi Lacey,

Would you have any further update to this? We recently updated our system with the latest Maximo 7.6.1.3 and Spatial 7.6.1 and it does not appear that the compatibility for ArcGIS 11.1 has been enabled.

Any help or advice is much appreciated.

Hi,

I just checked in with the Product Manager.  Support for ArcGIS 11.1 will be included with Maximo 7.6.1.3 and Spatial 7.6.1 with the iFix that is released end of this month, September.  I'll check back in after the iFix is released and verify. 

Hi Lacey,

Great to see that Spatial 7.6.1 is going to receive support ArcGIS 11.1. We find ourselves in a very similar position to the Ryan; would you be able to provide any update as to when we might see the certification for 7.6.1?

Hi Ryan,

I talked with the Spatial Product Manager this morning for an update.  We are currently testing with ArcGIS 11.1 for our MAS 8.11 release and plan to back port that support to Spatial 7.6.1 as well.  You will likely see this certification with 7.6.1 in the October timeframe as MAS 8.11 is planned for September release.  

Hi Bradley,

Yes, we'll be moving towards MAS soon. But not before we will need to upgrade our ArcGIS. So I'm hoping someone out there already has experience with the combination of ArcGIS 11.x and Maximo Spatial 7.6.1.0 and can share their findings.

Hi Ryan,

I took a look at that doc you referenced in your post. What is limitation to trading up to MAS 8.6? I realize that is a loaded question. 8.6 is the only listed version that handles ESRI 11.0 and Maximo EAM 7.6.1.x is going end of life in a relatively short period of time. I am thinking it is likely you are going in that direction soon anyway, yes? If not (i.e. you have no plans to upgrade in the next 24 months) why not? Is a technically not supported combination worth the risk to your business? Or to phrase it differently is the risk less than the cost of the upgrade?  I am curious as to your reasoning here.

Hello,

We're looking to upgrade our ArcGIS Server to version 11.1.    Our Maximo Spatial version is currently at 7.6.1.0.

IBM's Maximo Spatial docs don't list this combination as supported: 

Maximo Spatial System Requirements

But is anyone out there already using ArcGIS Server 11.x successfully with Maximo Spatial? Specifically with Spatial v7.6.1.0?

We'd appreciate hearing whether it's working for you or if you came across any issues.

Thanks in advance,

Ryan

Thanks Lacey, I'll have my support technician reach out to you on are current issues.

Hi,

Our Spatial Development group is finalizing the testing to verify if there are any issues with supporting ArcGIS 11.1.   Plan is to have testing finishing by end of November (so a little over a week).  If no issues are found, then we will update the System Requirements to include support for ArcGIS 11.1 with Maximo 7.6.1.3 and Spatial 7.6.1.1.  If issues are found, we will address them through an iFix. 

Send me an email at lacey.lurges@us.ibm.com to tell us more about the issues you are facing so we can help.  You may need a formal support ticket as well.  If the issue is caused by changes in ArcGIS 11.1 then there will need to be a fix. 

I'll update this thread once 11.1 is officially supported. 

System Requirements for IBM Maximo Spatial Asset Management

Thanks for the update Mark. Do you know what specific functions of Maximo Spatial isn't working for you?  (embedded mapping, asset/location inbound integration from GIS, outbound integration of edits to GIS?)

Hi Lacey,

Would you have any further update to this? We recently updated our system with the latest Maximo 7.6.1.3 and Spatial 7.6.1 and it does not appear that the compatibility for ArcGIS 11.1 has been enabled.

Any help or advice is much appreciated.

Hi,

I just checked in with the Product Manager.  Support for ArcGIS 11.1 will be included with Maximo 7.6.1.3 and Spatial 7.6.1 with the iFix that is released end of this month, September.  I'll check back in after the iFix is released and verify. 

Hi Lacey,

Great to see that Spatial 7.6.1 is going to receive support ArcGIS 11.1. We find ourselves in a very similar position to the Ryan; would you be able to provide any update as to when we might see the certification for 7.6.1?

Hi Ryan,

I talked with the Spatial Product Manager this morning for an update.  We are currently testing with ArcGIS 11.1 for our MAS 8.11 release and plan to back port that support to Spatial 7.6.1 as well.  You will likely see this certification with 7.6.1 in the October timeframe as MAS 8.11 is planned for September release.  

Hi Bradley,

Yes, we'll be moving towards MAS soon. But not before we will need to upgrade our ArcGIS. So I'm hoping someone out there already has experience with the combination of ArcGIS 11.x and Maximo Spatial 7.6.1.0 and can share their findings.

Hi Ryan,

I took a look at that doc you referenced in your post. What is limitation to trading up to MAS 8.6? I realize that is a loaded question. 8.6 is the only listed version that handles ESRI 11.0 and Maximo EAM 7.6.1.x is going end of life in a relatively short period of time. I am thinking it is likely you are going in that direction soon anyway, yes? If not (i.e. you have no plans to upgrade in the next 24 months) why not? Is a technically not supported combination worth the risk to your business? Or to phrase it differently is the risk less than the cost of the upgrade?  I am curious as to your reasoning here.

Hello,

We're looking to upgrade our ArcGIS Server to version 11.1.    Our Maximo Spatial version is currently at 7.6.1.0.

IBM's Maximo Spatial docs don't list this combination as supported: 

Maximo Spatial System Requirements

But is anyone out there already using ArcGIS Server 11.x successfully with Maximo Spatial? Specifically with Spatial v7.6.1.0?

We'd appreciate hearing whether it's working for you or if you came across any issues.

Thanks in advance,

Ryan

Does your ArcGis DB supports pagination? Starting from some 7.6.x version maximo is doing requests only with pagination.

Thanks Lacey, I'll have my support technician reach out to you on are current issues.

Hi,

Our Spatial Development group is finalizing the testing to verify if there are any issues with supporting ArcGIS 11.1.   Plan is to have testing finishing by end of November (so a little over a week).  If no issues are found, then we will update the System Requirements to include support for ArcGIS 11.1 with Maximo 7.6.1.3 and Spatial 7.6.1.1.  If issues are found, we will address them through an iFix. 

Send me an email at lacey.lurges@us.ibm.com to tell us more about the issues you are facing so we can help.  You may need a formal support ticket as well.  If the issue is caused by changes in ArcGIS 11.1 then there will need to be a fix. 

I'll update this thread once 11.1 is officially supported. 

System Requirements for IBM Maximo Spatial Asset Management

Thanks for the update Mark. Do you know what specific functions of Maximo Spatial isn't working for you?  (embedded mapping, asset/location inbound integration from GIS, outbound integration of edits to GIS?)

Hi Lacey,

Would you have any further update to this? We recently updated our system with the latest Maximo 7.6.1.3 and Spatial 7.6.1 and it does not appear that the compatibility for ArcGIS 11.1 has been enabled.

Any help or advice is much appreciated.

Hi,

I just checked in with the Product Manager.  Support for ArcGIS 11.1 will be included with Maximo 7.6.1.3 and Spatial 7.6.1 with the iFix that is released end of this month, September.  I'll check back in after the iFix is released and verify. 

Hi Lacey,

Great to see that Spatial 7.6.1 is going to receive support ArcGIS 11.1. We find ourselves in a very similar position to the Ryan; would you be able to provide any update as to when we might see the certification for 7.6.1?

Hi Ryan,

I talked with the Spatial Product Manager this morning for an update.  We are currently testing with ArcGIS 11.1 for our MAS 8.11 release and plan to back port that support to Spatial 7.6.1 as well.  You will likely see this certification with 7.6.1 in the October timeframe as MAS 8.11 is planned for September release.  

Hi Bradley,

Yes, we'll be moving towards MAS soon. But not before we will need to upgrade our ArcGIS. So I'm hoping someone out there already has experience with the combination of ArcGIS 11.x and Maximo Spatial 7.6.1.0 and can share their findings.

Hi Ryan,

I took a look at that doc you referenced in your post. What is limitation to trading up to MAS 8.6? I realize that is a loaded question. 8.6 is the only listed version that handles ESRI 11.0 and Maximo EAM 7.6.1.x is going end of life in a relatively short period of time. I am thinking it is likely you are going in that direction soon anyway, yes? If not (i.e. you have no plans to upgrade in the next 24 months) why not? Is a technically not supported combination worth the risk to your business? Or to phrase it differently is the risk less than the cost of the upgrade?  I am curious as to your reasoning here.

Hello,

We're looking to upgrade our ArcGIS Server to version 11.1.    Our Maximo Spatial version is currently at 7.6.1.0.

IBM's Maximo Spatial docs don't list this combination as supported: 

Maximo Spatial System Requirements

But is anyone out there already using ArcGIS Server 11.x successfully with Maximo Spatial? Specifically with Spatial v7.6.1.0?

We'd appreciate hearing whether it's working for you or if you came across any issues.

Thanks in advance,

Ryan

Thanks Lacey, I'll have my support technician reach out to you on are current issues.

Hi,

Our Spatial Development group is finalizing the testing to verify if there are any issues with supporting ArcGIS 11.1.   Plan is to have testing finishing by end of November (so a little over a week).  If no issues are found, then we will update the System Requirements to include support for ArcGIS 11.1 with Maximo 7.6.1.3 and Spatial 7.6.1.1.  If issues are found, we will address them through an iFix. 

Send me an email at lacey.lurges@us.ibm.com to tell us more about the issues you are facing so we can help.  You may need a formal support ticket as well.  If the issue is caused by changes in ArcGIS 11.1 then there will need to be a fix. 

I'll update this thread once 11.1 is officially supported. 

System Requirements for IBM Maximo Spatial Asset Management

Thanks for the update Mark. Do you know what specific functions of Maximo Spatial isn't working for you?  (embedded mapping, asset/location inbound integration from GIS, outbound integration of edits to GIS?)

Hi Lacey,

Would you have any further update to this? We recently updated our system with the latest Maximo 7.6.1.3 and Spatial 7.6.1 and it does not appear that the compatibility for ArcGIS 11.1 has been enabled.

Any help or advice is much appreciated.

Hi,

I just checked in with the Product Manager.  Support for ArcGIS 11.1 will be included with Maximo 7.6.1.3 and Spatial 7.6.1 with the iFix that is released end of this month, September.  I'll check back in after the iFix is released and verify. 

Hi Lacey,

Great to see that Spatial 7.6.1 is going to receive support ArcGIS 11.1. We find ourselves in a very similar position to the Ryan; would you be able to provide any update as to when we might see the certification for 7.6.1?

Hi Ryan,

I talked with the Spatial Product Manager this morning for an update.  We are currently testing with ArcGIS 11.1 for our MAS 8.11 release and plan to back port that support to Spatial 7.6.1 as well.  You will likely see this certification with 7.6.1 in the October timeframe as MAS 8.11 is planned for September release.  

Hi Bradley,

Yes, we'll be moving towards MAS soon. But not before we will need to upgrade our ArcGIS. So I'm hoping someone out there already has experience with the combination of ArcGIS 11.x and Maximo Spatial 7.6.1.0 and can share their findings.

Hi Ryan,

I took a look at that doc you referenced in your post. What is limitation to trading up to MAS 8.6? I realize that is a loaded question. 8.6 is the only listed version that handles ESRI 11.0 and Maximo EAM 7.6.1.x is going end of life in a relatively short period of time. I am thinking it is likely you are going in that direction soon anyway, yes? If not (i.e. you have no plans to upgrade in the next 24 months) why not? Is a technically not supported combination worth the risk to your business? Or to phrase it differently is the risk less than the cost of the upgrade?  I am curious as to your reasoning here.

Hello,

We're looking to upgrade our ArcGIS Server to version 11.1.    Our Maximo Spatial version is currently at 7.6.1.0.

IBM's Maximo Spatial docs don't list this combination as supported: 

Maximo Spatial System Requirements

But is anyone out there already using ArcGIS Server 11.x successfully with Maximo Spatial? Specifically with Spatial v7.6.1.0?

We'd appreciate hearing whether it's working for you or if you came across any issues.

Thanks in advance,

Ryan

Sounds good.  I'll wait to hear from them and we will see if we can reproduce as we test.

Thanks Lacey, I'll have my support technician reach out to you on are current issues.

Hi,

Our Spatial Development group is finalizing the testing to verify if there are any issues with supporting ArcGIS 11.1.   Plan is to have testing finishing by end of November (so a little over a week).  If no issues are found, then we will update the System Requirements to include support for ArcGIS 11.1 with Maximo 7.6.1.3 and Spatial 7.6.1.1.  If issues are found, we will address them through an iFix. 

Send me an email at lacey.lurges@us.ibm.com to tell us more about the issues you are facing so we can help.  You may need a formal support ticket as well.  If the issue is caused by changes in ArcGIS 11.1 then there will need to be a fix. 

I'll update this thread once 11.1 is officially supported. 

System Requirements for IBM Maximo Spatial Asset Management

Thanks for the update Mark. Do you know what specific functions of Maximo Spatial isn't working for you?  (embedded mapping, asset/location inbound integration from GIS, outbound integration of edits to GIS?)

Hi Lacey,

Would you have any further update to this? We recently updated our system with the latest Maximo 7.6.1.3 and Spatial 7.6.1 and it does not appear that the compatibility for ArcGIS 11.1 has been enabled.

Any help or advice is much appreciated.

Hi,

I just checked in with the Product Manager.  Support for ArcGIS 11.1 will be included with Maximo 7.6.1.3 and Spatial 7.6.1 with the iFix that is released end of this month, September.  I'll check back in after the iFix is released and verify. 

Hi Lacey,

Great to see that Spatial 7.6.1 is going to receive support ArcGIS 11.1. We find ourselves in a very similar position to the Ryan; would you be able to provide any update as to when we might see the certification for 7.6.1?

Hi Ryan,

I talked with the Spatial Product Manager this morning for an update.  We are currently testing with ArcGIS 11.1 for our MAS 8.11 release and plan to back port that support to Spatial 7.6.1 as well.  You will likely see this certification with 7.6.1 in the October timeframe as MAS 8.11 is planned for September release.  

Hi Bradley,

Yes, we'll be moving towards MAS soon. But not before we will need to upgrade our ArcGIS. So I'm hoping someone out there already has experience with the combination of ArcGIS 11.x and Maximo Spatial 7.6.1.0 and can share their findings.

Hi Ryan,

I took a look at that doc you referenced in your post. What is limitation to trading up to MAS 8.6? I realize that is a loaded question. 8.6 is the only listed version that handles ESRI 11.0 and Maximo EAM 7.6.1.x is going end of life in a relatively short period of time. I am thinking it is likely you are going in that direction soon anyway, yes? If not (i.e. you have no plans to upgrade in the next 24 months) why not? Is a technically not supported combination worth the risk to your business? Or to phrase it differently is the risk less than the cost of the upgrade?  I am curious as to your reasoning here.

Hello,

We're looking to upgrade our ArcGIS Server to version 11.1.    Our Maximo Spatial version is currently at 7.6.1.0.

IBM's Maximo Spatial docs don't list this combination as supported: 

Maximo Spatial System Requirements

But is anyone out there already using ArcGIS Server 11.x successfully with Maximo Spatial? Specifically with Spatial v7.6.1.0?

We'd appreciate hearing whether it's working for you or if you came across any issues.

Thanks in advance,

Ryan