Primary Storage

Hello,

I would like to implement a hyperswap configuration with 2  flashsystem 5300 i/o group  with direct attach inter-room between canisters.

Does I need 4 FC port per canister for the inter-room connexions like this picture below or 2 FC ports per canister are sufficient?

Thanks,

Thierry

In this way you have double-doble redundancy and double bandwidth. Basing on your data rate even 2 could be adequate.

Hello,

I would like to implement a hyperswap configuration with 2  flashsystem 5300 i/o group  with direct attach inter-room between canisters.

Does I need 4 FC port per canister for the inter-room connexions like this picture below or 2 FC ports per canister are sufficient?

Thanks,

Thierry

Hello,

I would like to implement a hyperswap configuration with 2  flashsystem 5300 i/o group  with direct attach inter-room between canisters.

Does I need 4 FC port per canister for the inter-room connexions like this picture below or 2 FC ports per canister are sufficient?

Thanks,

Thierry

Yes, that is correct. There are such installations with other Flashsystems. And remember you need also a Quorum on a 3rd place connected to both sites. 

Hello,

I would like to implement a hyperswap configuration with 2  flashsystem 5300 i/o group  with direct attach inter-room between canisters.

Does I need 4 FC port per canister for the inter-room connexions like this picture below or 2 FC ports per canister are sufficient?

Thanks,

Thierry

Thanks Bernd, I know for the quorum, I will setup the IP java application in a third room.

Yes, that is correct. There are such installations with other Flashsystems. And remember you need also a Quorum on a 3rd place connected to both sites. 

Hello,

I would like to implement a hyperswap configuration with 2  flashsystem 5300 i/o group  with direct attach inter-room between canisters.

Does I need 4 FC port per canister for the inter-room connexions like this picture below or 2 FC ports per canister are sufficient?

Thanks,

Thierry

If your boxes is 5300, do you consider to use pbha instead of hyperswap?

Thanks Bernd, I know for the quorum, I will setup the IP java application in a third room.

Yes, that is correct. There are such installations with other Flashsystems. And remember you need also a Quorum on a 3rd place connected to both sites. 

Hello,

I would like to implement a hyperswap configuration with 2  flashsystem 5300 i/o group  with direct attach inter-room between canisters.

Does I need 4 FC port per canister for the inter-room connexions like this picture below or 2 FC ports per canister are sufficient?

Thanks,

Thierry

Hello,

I would like to implement a hyperswap configuration with 2  flashsystem 5300 i/o group  with direct attach inter-room between canisters.

Does I need 4 FC port per canister for the inter-room connexions like this picture below or 2 FC ports per canister are sufficient?

Thanks,

Thierry

Hello,

I would like to implement a hyperswap configuration with 2  flashsystem 5300 i/o group  with direct attach inter-room between canisters.

Does I need 4 FC port per canister for the inter-room connexions like this picture below or 2 FC ports per canister are sufficient?

Thanks,

Thierry