AIX

AIX

Connect with fellow AIX users and experts to gain knowledge, share insights, and solve problems.

 View Only
Back to discussions
Expand all | Collapse all

Nextract plus error

  • 1.  Nextract plus error

    Posted Mon November 22, 2021 03:09 PM
    Hello , 
    I have nextract_plus script (from Mr nmon) , with python 3 installed (on Aix) with requests packages.

    I also configure influxdb and Grafana.

    When i run the script on hmc config , i got this message .

    Any suggestions ?

    ------------------------------
    OUSSAMA NAZIH
    ------------------------------


  • 2.  RE: Nextract plus error

    Posted Tue December 07, 2021 08:00 AM
    From error message it is clear that request module is not found. 
    Can you verify if request module is installed. You can try importing that on python3 prompt.

    ------------------------------
    SANKET RATHI
    ------------------------------

    Original Message


  • 3.  RE: Nextract plus error

    Posted Tue January 24, 2023 03:26 PM

    Hi,
    Hopefully, you got this working and Sanket is right.

    hmc_pcm.py comes with nextract_plus.
    Put it in the same directory as nextract_plus

    Actually, I have them both in the same directory and run netract_plus.py from that directory.

    Please upgrade to nextract plus version 41  - it is much better.
    Downloadable from here: https://www.ibm.com/support/pages/nextract-plus-hmc-rest-api-performance-statistics

    Cheers, Nigel



    ------------------------------
    Nigel Griffiths
    ------------------------------

    Original Message


  • 4.  RE: Nextract plus error

    Posted Tue July 11, 2023 01:14 PM

    Hi, I used a nextrac 41 with influxdb version1, now I've a update for version 2, and I received this message of error:

    Traceback (most recent call last):
      File "/opt/hmc/nextract_plus.py", line 110, in <module>
        client = InfluxDBClient(iurl, iorg, itoken)
    NameError: name 'iurl' is not defined

    This is a part of the conf:

    "comment1": "Valid setting for output_influx = 0 (off), 1 or 2",
    "output_influx": 2,
    "comment3": "InfluxDB 2.x options",
    "iurl": "http://10.0.0.17:8086",
    "ibucket": "hmc",
    "iorg": "hmc",
    "itoken": "WWT5QNUKdYE7CcFv_IPcrIEyrvMqw_K0akg1MA==",
    "comment4": "other parameters are ignored"



    ------------------------------
    Marcell Rafael Pinto
    ------------------------------

    Original Message


  • 5.  RE: Nextract plus error

    Posted Sun July 16, 2023 11:48 AM

    Marcell Rafael Pinto Thanks for reporting this.

    Just added nextract_plus_v43.py to Source Forge with the fix.

    Find it at https://sourceforge.net/projects/nmon/files/

    Let me know if that worked. You can also email me at nigelargriffiths@hotmail.com



    ------------------------------
    Nigel Griffiths
    ------------------------------

    Original Message


  • 6.  RE: Nextract plus error

    Posted Wed July 26, 2023 01:34 PM

    Hello Nigel, I used the new version V43, but a new error occurred !

    /opt/hmc/nextract_plus2.py opening config file:hmc_conf_2.json
    Traceback (most recent call last):
      File "/opt/hmc/nextract_plus2.py", line 131, in <module>
        client = InfluxDBClient(iurl, str(iorg), itoken)
      File "/usr/local/lib/python3.6/site-packages/influxdb/client.py", line 115, in __init__
        self.__port = int(port)
    ValueError: invalid literal for int() with base 10: 'asset'



    ------------------------------
    Marcell Rafael Pinto
    ------------------------------

    Original Message


  • 7.  RE: Nextract plus error

    Posted Fri October 13, 2023 04:27 PM
    Hello Nigel, please give your support if this error was overcome, I am also getting the same thing.
     
    Greetings.


    ------------------------------
    Victor Guzman
    ------------------------------

    Original Message


  • 8.  RE: Nextract plus error

    Posted Sun October 15, 2023 11:32 AM

    Hi,

    Perhaps a mismatch between the InfluxDB version and the InlfuxDBClient python module.

    I think you might be using the InfluxDBClient Python module version 1 which communicates with InfluxDB version 1

    client = InfluxDBClient('localhost', 8086, 'root', 'root', 'example')

    Note: the port number 8686 parameter among the others

    to attempt to talk to InfluxDBClient Python module version 2 which communicates with InfluxDB version 2

    client = InfluxDBClient(url="http://localhost:8086", token="my-token", org="my-org")

    Note the url, token and org parameters

    Cheers, Nigel



    ------------------------------
    nigel griffiths
    nigelgriffiths
    ------------------------------

    Original Message


  • 9.  RE: Nextract plus error

    Posted Mon December 04, 2023 09:22 AM

    Hello! Facing an issue with the nextract_plus script on AIX, Python 3, and requests packages. Configured InfluxDB and Grafana. Encountering an error during HMC config. Any suggestions or insights to troubleshoot this would be greatly appreciated for neotonics reviews!



    ------------------------------
    James Anderson
    ------------------------------

    Original Message


  • 10.  RE: Nextract plus error

    Posted Wed July 03, 2024 02:37 PM
    Edited by Carl Burnett Wed July 03, 2024 03:46 PM

    Hello James, my suggestion is you install the nextrac_plus on Linux is more simple and use influxDB1 and connect o influxDB datasource on Grafana, with script on linux than connect to HMC and return data to influxdb

    The packages Python you need install

    pip3 install hmc
    pip3 install influxdb-client
    pip3 install requests
    pip3 install json
    pip3 list
    pip3 install influxdb



    ------------------------------
    Marcell Rafael Pinto
    ------------------------------

    Original Message