Engineering

Expand all | Collapse all

Rhapsody Custom Tables

  • 1.  Rhapsody Custom Tables

    Posted 21 days ago
    Dear Sir and Madam,

    I'm a hardware engineer and learning how SysML can help me to design hardware components. Especially we integrate mechanical, electrical harness and PCBs to very intelligent devices for our customers.
    For requirement specification we use IBM Doors, but most of the interaction during devolpment in mechanical, harness and PCBs is done by ICD documents and a lot of handwork. I would like to try how SysML can help me to run a good change management and link to Doors.

    At this time we're just in the beginning of the process. We can't change the whole development process from one day.
    I would like to know if there is any possiblity to use custom table views for ICD definitions?
    If found an example for MagicDraw, an know there's a way to create custom tables with embedded Java. But I couldn't find any documentation.
    Have a look at to link at the bottom to see what I mean with ICD tables.

    Does anybody can give me a few keywords how I can implement this?

    Best regards,
    Sascha

    Real Magic: Building Custom Interface Tables with Cameo/Magic Draw and Generic Tables - Qualicen
    Qualicen remove preview
    Real Magic: Building Custom Interface Tables with Cameo/Magic Draw and Generic Tables - Qualicen
    One of the great things about Model-Based Systems Engineering (MBSE) is that the system model enables us to run all kinds of analyses, for example regarding the consistency, or compliance with company guidelines, to create reports and perform simulations.
    View this on Qualicen >


    ------------------------------
    Sascha Berkenkamp
    ------------------------------


  • 2.  RE: Rhapsody Custom Tables

    Posted 20 days ago
    Here is the Basic for Rhapsody:
    IBM Rhapsody Tables: The Basics - YouTube

    ------------------------------
    Joakim Nilsson
    Senior Solution Specialist - Sales
    Nohau Solutions AB
    Malmö
    46733319921
    ------------------------------



  • 3.  RE: Rhapsody Custom Tables

    Posted 19 days ago
      |   view attached
    Sure you can do this - attached is a package you can add to your model that shows a proxy port table - you can tweak it to your needs - it only took a few minutes to create



    ------------------------------
    Andy Lapping
    Technical Enablement Specialist
    IBM
    ------------------------------

    Attachment(s)



  • 4.  RE: Rhapsody Custom Tables

    Posted 12 days ago
      |   view attached
    Hi Andy,
    thank you. This helps me to create an ICD view for a connection cable or connection between different devices.

    Now I try to find to create an ICD view for hardware devices.
    F.g.
    DeviceName   ConnectorName  PinNo   SignalName
    Computer         COM1                   1           GND
    Computer         COM1                   2           RX
    Computer         COM1                   3           TX
    [....]

    Best regards,
    Sascha

    ------------------------------
    Sascha Berkenkamp
    ------------------------------

    Attachment(s)

    zip
    RS232_Example.zip   70 KB 1 version