MQ

MQ

Join this online group to communicate across IBM product users and experts by sharing advice and best practices with peers and staying up to date regarding product enhancements.

 View Only

  • 1.  SSL Connectivity Issues

    Posted 04/05/22 09:38 AM
    Hello All,

    We have configured a Queue Manager in GCP and we would like to connect to a partner now over SSL. The QM docker container was picked from Dockerhub: Docker Hubhttps://hub.docker.com/r/ibmcom/mq/ initially and then from the deprecation notification: icr.io/ibm-messaging/mq:9.2.5.0-r1

    We have modified the configuration to mount persistent  storage and edited the qm.ini to disable OCSP check. The connection to and from the partner works fine without SSL. When SSL is enabled, we can start our SDR channel successfully but their attempt to start the SDR from their end doesn't succeed. There are no FDCs and nothing obvious from the logs that suggest a possible issue. We looked at the network traffic and see that there are some initial packet exchanges, then there is silence for over 5 minutes and by close to the 6th minute a reset connection is issued from our end.

    SSL CIPH being used is TLS_RSA_WITH_AES_256_CBC_SHA256.

    bash-4.4$ dspmqver

    Name:        IBM MQ
    Version:     9.2.5.0
    Level:       p925-L220208.DE
    BuildType:   IKAP - (Production)
    Platform:    IBM MQ for Linux (x86-64 platform)
    Mode:        64-bit
    O/S:         Linux 5.4.170+
    O/S Details: Red Hat Enterprise Linux 8.5 (Ootpa)
    InstName:    Installation1
    InstDesc:    IBM MQ V9.2.5.0 (Unzipped)
    Primary:     N/A
    InstPath:    /opt/mqm
    DataPath:    /mnt/mqm/data
    MaxCmdLevel: 925
    LicenseType: Developer

     
    Any help in identifying the issue will be appreciated.

    Regards,
    BA

    ------------------------------
    B Abraham
    ------------------------------


  • 2.  RE: SSL Connectivity Issues

    Posted 04/05/22 12:57 PM
    Thanks for sharing the error messages that your messaging partner experiences when it starts its SDR.
    Do the logs on your side indicate that something tried to connect with?

    ------------------------------
    Matthias Jungbauer
    ------------------------------



  • 3.  RE: SSL Connectivity Issues

    Posted 04/05/22 03:17 PM
    What does DISPLAY CHSTATUS(chl-name) show in the SUBSTATE field - both ends.

    ------------------------------
    Morag Hughson
    MQ Technical Education Specialist
    MQGem Software Limited
    Website: https://www.mqgem.com
    ------------------------------



  • 4.  RE: SSL Connectivity Issues

    Posted 04/05/22 06:03 PM
    Hello Morag,

    At our end, the receiver channel does not show any status as such and hence we won't have a substate.  The sender side is on z/OS and the channel goes into a BINDING until it gets disconnected.

    Strangely we saw the channel in RUNNING state a couple of times but it took more than 13 minutes for the connection to establish. Sequence of events:

    1. SDR initiates a manual channel start
    2. TCP packets gets exchanged between SDR/RCV
    3. No packets for about 6 minutes
    4. RCVR sends a RESET
    5 SDR Retries and connection gets established.

    Below is the log from SDR side as shared by them:

    10.46.45 STC20407 +CSQX500I MQ@U CSQXRCTL Channel XXXX_03021102.C1 started manual channel start

    10.59.00 STC20407 +CSQX208E MQ@U CSQXRCTL Error receiving data, 668 error received after 13 minutes
    668 channel XXXX_YYYYYYYY.C1
    668 connection xx.xx.xx.xx
    668 (queue manager ????)
    668 TRPTYPE=TCP RC=00000461 (ECONNRESET) reason=769E0291
    10.59.00 STC20407 +CSQX638E MQ@U CSQXRCTL SSL communications error for channel
    669 XXXX_YYYYYYYY.C1, connection xx.xx.xx.xx
    10.59.00 STC20407 +CSQX599E MQ@U CSQXRCTL Channel XXXX_YYYYYYYY.C1 ended abnormally

    10.59.00 STC20407 +CSQX500I MQ@U CSQXRCTL Channel XXXX_YYYYYYYY.C1 started channel actually starts session

    11.07.35 STC20407 +CSQX545I MQ@U CSQXRCTL Channel XXXX_YYYYYYYY.C1 closing because disconnect interval expires
    522 disconnect interval expired
    11.07.35 STC20407 +CSQX501I MQ@U CSQXRCTL Channel XXXX_YYYYYYYY.C1 no longer active channel goes into INACTIVE state

    A repeat of the above.

    11.11.42 STC20407 +CSQX500I MQ@U CSQXRCTL Channel XXXX_YYYYYYYY.C1 started

    11.24.00 STC20407 +CSQX208E MQ@U CSQXRCTL Error receiving data, 894
    894 channel XXXX_YYYYYYYY.C1
    894 connection xx.xx.xx.xx
    894 (queue manager ????)
    894 TRPTYPE=TCP RC=00000461 (ECONNRESET) reason=769E0291

    11.24.00 STC20407 +CSQX638E MQ@U CSQXRCTL SSL communications error for channel
    896 XXXX_YYYYYYYY.C1, connection xx.xx.xx.xx
    11.24.00 STC20407 +CSQX599E MQ@U CSQXRCTL Channel XXXX_YYYYYYYY.C1 ended abnormally

    11.24.08 STC20407 +CSQX500I MQ@U CSQXRCTL Channel XXXX_YYYYYYYY.C1 started
    11.29.09 STC20407 +CSQX545I MQ@U CSQXRCTL Channel DTC0U_03021102.C1 closing because
    582 disconnect interval expired
    11.29.09 STC20407 +CSQX501I MQ@U CSQXRCTL Channel DTC0U_03021102.C1 no longer active

    Regards,
    BA

    ------------------------------
    B Abraham
    ------------------------------

    Original Message


  • 5.  RE: SSL Connectivity Issues

    Posted 04/05/22 06:10 PM
    And so what is the SUBSTATE of the SENDER channel? That will show how far through the BINDING process the channel has got.

    ------------------------------
    Morag Hughson
    MQ Technical Education Specialist
    MQGem Software Limited
    Website: https://www.mqgem.com
    ------------------------------

    Original Message


  • 6.  RE: SSL Connectivity Issues

    Posted 04/07/22 11:13 PM
    Hello Morag,

    Below is what we have been provided by the partner QM on the channel status:

    display chstatus(XXXXX_YYYYYYYY.C1) all

    CHSTATUS(XXXXX_YYYYYYYY.C1)
    CHLDISP(PRIVATE)
    XMITQ(XXXXX_YYYYYYYY.XMT01)
    CONNAME(10.12.34.56(1414))
    CURRENT
    CHLTYPE(SDR)
    STATUS(BINDING)
    SUBSTATE(SSLHANDSHK)
    INDOUBT(NO)
    LSTSEQNO(0)
    LSTLUWID(0000000000000000)
    CURMSGS(0)
    CURSEQNO(0)
    CURLUWID(0000000000000000)
    LSTMSGTI()
    LSTMSGDA()
    MSGS(0)
    BYTSSENT(0)
    BYTSRCVD(0)
    BATCHES(0)
    CHSTATI(15.48.08)
    CHSTADA(2022-04-07)
    BUFSSENT(0)
    BUFSRCVD(0)
    LONGRTS(999999871)
    SHORTRTS(0)
    MONCHL(OFF)
    STOPREQ(NO)
    KAINT(0)
    QMNAME(MQMU)
    RQMNAME()
    SECPROT(NONE)
    SSLCERTI()
    SSLCERTU()
    SSLCIPH()
    SSLRKEYS(0)
    SSLKEYTI()
    SSLKEYDA()
    SSLPEER()
    RPRODUCT()
    RVERSION()
    STATCHL(OFF)
    LOCLADDR()
    BATCHSZ(50)
    MAXMSGL(4194304)
    COMPHDR(
    NONE
    NONE
    )
    COMPMSG(
    NONE
    NONE
    )
    HBINT(300)
    NPMSPEED(NORMAL)
    END CHSTATUS DETAILS


    ------------------------------
    B Abraham
    ------------------------------

    Original Message


Related Content