Hi,

Anyone know how to config Guardium system to work with SNMP V3? What is the steps? 
I know about the command "store system snmp verion v3" but don't know what next because it's need to be different from SNMP V2.   

Thanks! :)

------------------------------
Eden Amsalem
------------------------------

Use this CLI command to switch between SNMP version 2 and SNMP version 3. The default is v2 If your system uses SNMPv3, use this command to update Guardium
Syntax: store system snmp v3

------------------------------
PRAVIN MESHRAM
------------------------------

Hi Pravin,

I did this step but I don't know what is next because SNMP V2 works different from V3 .

Thanks,
Eden.

------------------------------
Eden Amsalem
------------------------------

Original Message:
Sent: Thu February 20, 2020 05:12 AM
From: PRAVIN MESHRAM
Subject: SNMP V3 Configuration

Use this CLI command to switch between SNMP version 2 and SNMP version 3. The default is v2 If your system uses SNMPv3, use this command to update Guardium
Syntax: store system snmp v3

------------------------------
PRAVIN MESHRAM
------------------------------

Hi Eden,

I have been trying to get the answer to your question for 31 days now (open case) and will post an update as soon as I get one from support.  The issue I have is how to configure the SNMPv3 authentication.  I have been unable to get support to provide the commands needed to enable this.  If you get the answer before I do, please be sure to post it for the rest of us :)

------------------------------
Dan Price
------------------------------

Original Message:
Sent: Thu February 20, 2020 10:27 AM
From: Eden Amsalem
Subject: SNMP V3 Configuration

Hi Pravin,

I did this step but I don't know what is next because SNMP V2 works different from V3 .

Thanks,
Eden.

------------------------------
Eden Amsalem
------------------------------


Original Message:
Sent: Thu February 20, 2020 05:12 AM
From: PRAVIN MESHRAM
Subject: SNMP V3 Configuration

Use this CLI command to switch between SNMP version 2 and SNMP version 3. The default is v2 If your system uses SNMPv3, use this command to update Guardium
Syntax: store system snmp v3

------------------------------
PRAVIN MESHRAM

Hi Dan,

The same issue for me.. there is no any command for the authentication. 
Hope someone will update us soon as possible :)


------------------------------
Eden Amsalem
------------------------------

Original Message:
Sent: Fri February 21, 2020 08:14 AM
From: Dan Price
Subject: SNMP V3 Configuration

Hi Eden,

I have been trying to get the answer to your question for 31 days now (open case) and will post an update as soon as I get one from support.  The issue I have is how to configure the SNMPv3 authentication.  I have been unable to get support to provide the commands needed to enable this.  If you get the answer before I do, please be sure to post it for the rest of us :)

------------------------------
Dan Price
------------------------------


Original Message:
Sent: Thu February 20, 2020 10:27 AM
From: Eden Amsalem
Subject: SNMP V3 Configuration

Hi Pravin,

I did this step but I don't know what is next because SNMP V2 works different from V3 .

Thanks,
Eden.

------------------------------
Eden Amsalem


Original Message:
Sent: Thu February 20, 2020 05:12 AM
From: PRAVIN MESHRAM
Subject: SNMP V3 Configuration

Use this CLI command to switch between SNMP version 2 and SNMP version 3. The default is v2 If your system uses SNMPv3, use this command to update Guardium
Syntax: store system snmp v3

------------------------------
PRAVIN MESHRAM

I have been informed this will be corrected in version 11.2  :(

------------------------------
Dan Price
------------------------------

Original Message:
Sent: Mon February 24, 2020 01:57 AM
From: Eden Amsalem
Subject: SNMP V3 Configuration

Hi Dan,

The same issue for me.. there is no any command for the authentication. 
Hope someone will update us soon as possible :)


------------------------------
Eden Amsalem
------------------------------


Original Message:
Sent: Fri February 21, 2020 08:14 AM
From: Dan Price
Subject: SNMP V3 Configuration

Hi Eden,

I have been trying to get the answer to your question for 31 days now (open case) and will post an update as soon as I get one from support.  The issue I have is how to configure the SNMPv3 authentication.  I have been unable to get support to provide the commands needed to enable this.  If you get the answer before I do, please be sure to post it for the rest of us :)

------------------------------
Dan Price


Original Message:
Sent: Thu February 20, 2020 10:27 AM
From: Eden Amsalem
Subject: SNMP V3 Configuration

Hi Pravin,

I did this step but I don't know what is next because SNMP V2 works different from V3 .

Thanks,
Eden.

------------------------------
Eden Amsalem


Original Message:
Sent: Thu February 20, 2020 05:12 AM
From: PRAVIN MESHRAM
Subject: SNMP V3 Configuration

Use this CLI command to switch between SNMP version 2 and SNMP version 3. The default is v2 If your system uses SNMPv3, use this command to update Guardium
Syntax: store system snmp v3

------------------------------
PRAVIN MESHRAM

ohh very bad for us but thanks for the update :)

------------------------------
Eden Amsalem
------------------------------

Original Message:
Sent: Tue February 25, 2020 04:56 PM
From: Dan Price
Subject: SNMP V3 Configuration

I have been informed this will be corrected in version 11.2  :(

------------------------------
Dan Price
------------------------------


Original Message:
Sent: Mon February 24, 2020 01:57 AM
From: Eden Amsalem
Subject: SNMP V3 Configuration

Hi Dan,

The same issue for me.. there is no any command for the authentication. 
Hope someone will update us soon as possible :)


------------------------------
Eden Amsalem


Original Message:
Sent: Fri February 21, 2020 08:14 AM
From: Dan Price
Subject: SNMP V3 Configuration

Hi Eden,

I have been trying to get the answer to your question for 31 days now (open case) and will post an update as soon as I get one from support.  The issue I have is how to configure the SNMPv3 authentication.  I have been unable to get support to provide the commands needed to enable this.  If you get the answer before I do, please be sure to post it for the rest of us :)

------------------------------
Dan Price


Original Message:
Sent: Thu February 20, 2020 10:27 AM
From: Eden Amsalem
Subject: SNMP V3 Configuration

Hi Pravin,

I did this step but I don't know what is next because SNMP V2 works different from V3 .

Thanks,
Eden.

------------------------------
Eden Amsalem


Original Message:
Sent: Thu February 20, 2020 05:12 AM
From: PRAVIN MESHRAM
Subject: SNMP V3 Configuration

Use this CLI command to switch between SNMP version 2 and SNMP version 3. The default is v2 If your system uses SNMPv3, use this command to update Guardium
Syntax: store system snmp v3

------------------------------
PRAVIN MESHRAM