Power

 View Only

  • 1.  PowerVM VIOS 4.1

    Posted 16 days ago
    Reply

    PowerVM VIOS 4.1 can built on top of AIX 7.2 TL4? The customer are planning to use IBM E1050 with AIX 7.2 TL4 but want to use VIOS 4.1 to support some models of SAN storage direct connect.



    ------------------------------
    BOONNARONG RUJANAKRAIKAN
    ------------------------------


  • 2.  RE: PowerVM VIOS 4.1

    Posted 16 days ago
    Reply

    I don't quite understand the question.

    VIOS is it's own lpar.

    Is the aix 7.2 TL4 you're talking about an existing lpar?  Are you trying to see if that is compatible if the VIOS lpar is 4.1?  Or are you trying to put VIOS on the same lpar as your existing AIX lpar?

    I'll assume we're talking about two different lpars:  AIX and VIOS.  To see if they are compatible with each other you could run this all through the FLRT or Fix Level Recommendation Tool, at 

    https://esupport.ibm.com/customercare/flrt/report?pageNm=home&plat=power&p0.mtm=9043-MRX&p0.fw=MM1050_088&p1.parnm=Partition+1&p1.os=aix&p1.aix=7200-04-06-2220&p2.parnm=Partition+2&p2.os=vios&p2.vios=4.1.1.0&btnGo=SUBMIT

    You might want to add what version of HMC you're running into that mix.

    See also https://esupport.ibm.com/customercare/flrt/matrix?domain=mtm=9043-MRX&pkey=pwr



    ------------------------------
    Robert Berendt IBMChampion
    Business Systems Analyst, Lead
    Dekko
    Fort Wayne
    ------------------------------

    Original Message


  • 3.  RE: PowerVM VIOS 4.1

    Posted 16 days ago
    Reply
    IBM PowerVM IOS 4.1 is an operating system that is dedicated to providing virtualization services.
    IT is based on AIX 7.3, but is not a generic AIX operating system.
    PowerVM IOS 4.1 is a stand alone operating system that is installed via two mksysb images onto a LPAR configuration denoted as a VIO server.


     


    Regards

    ___________________________________________________________________________

    Paul Clayton

    Unix Engineer

    IOCO TEch

    Mobile: +27(0) 660847436

    VOIP: +27(0) 219194152





    Original Message


  • 4.  RE: PowerVM VIOS 4.1

    Posted 16 days ago
    Reply

    Hi Robert, sorry to make you confused, it's different LPARs. I'm trying to see are there any compatible between VIOS version with AIX version, or not? For example, we cannot install AIX 7.2 TL4 or below on the Power10 server that already installed VIOS 4.1.0 (just an example). or it's not related.

     



    ------------------------------
    BOONNARONG RUJANAKRAIKAN
    ------------------------------

    Original Message


  • 5.  RE: PowerVM VIOS 4.1

    Posted 15 days ago
    Reply

    Did you read the rest of my reply?

    I'll assume we're talking about two different lpars:  AIX and VIOS.  To see if they are compatible with each other you could run this all through the FLRT or Fix Level Recommendation Tool, at 

    E1050 FLRT sample

    You can click on Power Systems at the top to modify the report and update whatever level of firmware, hmc, etc you're running.  Add an os (like IBM i) if needed also.

    See also https://esupport.ibm.com/customercare/flrt/matrix?domain=mtm=9043-MRX&pkey=pwr



    ------------------------------
    Robert Berendt IBMChampion
    Business Systems Analyst, Lead
    Dekko
    Fort Wayne
    ------------------------------

    Original Message


Related Content