IBM Fusion

 View Only

  • 1.  IBM Fusion HCI Solution

    Posted Tue July 23, 2024 04:13 AM
    Reply

    Hi,

      We can use other brands of Hardware? and use IBM Software only for this solution write?



    ------------------------------
    Best Regards,

    Apidesh Dulma
    Managing Director/Service Manager
    A Vision IT Systems(Thailand) Co.Ltd.
    M:(+66)81-822-2904, (+66)61-390-2710
    E:apidesh@avisionitsystem.com
    www.avisionitsystem.com
    ------------------------------


  • 2.  RE: IBM Fusion HCI Solution

    Posted Wed July 24, 2024 01:37 PM
    Reply

    Hi,
    We can use other brands of Hardware and use IBM Fusion Software only.
    IBM Fusion Software can be deployed on other platforms as well.
    https://www.ibm.com/docs/en/storage-fusion-software/2.8.x?topic=deploying-storage-fusion



    ------------------------------
    TAN LONG SIAU
    ------------------------------

    Original Message


  • 3.  RE: IBM Fusion HCI Solution

    Posted Tue August 06, 2024 10:59 AM
    Reply

    It is worth noting that Fusion is primarily a SW defined solution.  Fusion SW can run on Power, Z systems, bare metal X86, VMware X86, the FUsion HCI system, or even on clouds like AWS, Azure, and IBM Cloud.  This allows customers to have a consistent operational model (ex back-up and DR) across all of those different platforms.  Customers that like Fusion HCI are not tied into it and can run Fusion SW with existing systems.  This gives customers a lot of flexibility.



    ------------------------------
    Dave McDonnell
    ------------------------------

    Original Message


  • 4.  RE: IBM Fusion HCI Solution

    Posted Wed August 07, 2024 03:36 AM
    Reply

    Fusion HCI is an appliance, as its an appliance delivered from IBM you can not choose the HW inside the Fusion HCI.

    if you want to choose hw, which can be x86, power of even z, then you have to deploy your own with Fusion SW. But then you of course aslo need to maintain, guarantee performance and support the HW of your choice. Only the Fusion HCI is a full blown appliance with everything you need for putting Openshift in production really fast.

    With good networks preparations it's 1 day !!! and then you can deploy Openshift applications



    ------------------------------
    ROGER ERIKSSON
    ------------------------------

    Original Message