Originally posted by: SystemAdmin

Hi,
I am working with different pSeries server which has different HBA model. Now I would like to know or search the mapping matrix between IBM HBA card and corresponding with Emulex card.
For example;IBM 6227 HBA Card is equivalent to LP11000 model.

Any help will be highly appreciated

Originally posted by: jvk

Not sure if it works, but give it a try:

1. lscfg -pvl fcs0

fcs0 U7879.001.DQDMDNP-P1-C4-T1 FC Adapter

Part Number.................03N7069
EC Level....................A
Serial Number...............1B63105054
Manufacturer................001B
Device Specific.(CC)........280B <---
FRU Number.................. 03N7069
Device Specific.(ZM)........3
Network Address.............10000000C9590B17
ROS Level and ID............0288193D
Device Specific.(Z0)........1001206D
Device Specific.(Z1)........00000000
Device Specific.(Z2)........00000000
Device Specific.(Z3)........03000909
Device Specific.(Z4)........FF801412
Device Specific.(Z5)........0288193D
Device Specific.(Z6)........0683193D
Device Specific.(Z7)........0783193D
Device Specific.(Z8)........20000000C9590B17
Device Specific.(Z9)........TS1.90X13
Device Specific.(ZA)........T1D1.90X13
Device Specific.(ZB)........T2D1.90X13
Device Specific.(YL)........U7879.001.DQDMDNP-P1-C4-T1
PLATFORM SPECIFIC

Name: fibre-channel
Model: LP10000 <---
Node: fibre-channel@1
Device Type: fcp
Physical Location: U7879.001.DQDMDNP-P1-C4-T1

so 280B is an IBM 2 Gigabit Fibre Channel PCI-X Adapter (ID 280B, ID 197E, ID 1957)
http://www14.software.ibm.com/webapp/set2/firmware/gjsn?mode=9&type=adapter
and from the 'lscfg -pl fcs0' it looks like an Emulex model LP10000
http://www.emulex.com/products/hba/10000/ds.jsp