Hello Team, I wanted to make a data power service that receives a base64 string and then converts this string into a pdf file and sends it back as an attached File, The problem is when I used xslt  dp:decode to decode the base64 string it gives an error because it contains non-UTF-8 characters so what to do I tried to look for any javascript build function that is supported in IBM data power gateway but can't find any so what to do and what is the best scenario for this service to work and also how to use multipart with the pdf so that it could be sent as an attached file?

Hi, "Buffer" is the GatewayScript datatype for data up to 1GB size.
Use ".from(str, 'base64')" to do the conversion you want:
buffer object

Short demo with node in Linux shell:

$ str=`echo -n "foobar" | base64`
$ node -e "console.log(Buffer.from('$str', 'base64'))"
<Buffer 66 6f 6f 62 61 72>
$ 

------------------------------
Hermann Stamm-Wilbrandt
Compiler Level 3 support
IBM DataPower Gateways (⬚ᵈᵃᵗᵃ / ⣏⠆⡮⡆⢹⠁⡮⡆⡯⠂⢎⠆⡧⡇⣟⡃⡿⡃)
https://stamm-wilbrandt.de/en/blog/
------------------------------

Thanks a lot, I have tried it but I have another question how can I create a pdf and then attached it to the response message, and in what format (for example utf-8, hex )do I need to create a pdf cause I have tried this code but the pdf isn't correct

let crlf = '\r\n';

// your boundry is a string starts with _Part and then some numbers

let multipartMessageStartPart = '------=your boundry' + crlf +

        'Content-Type: application/json; charset=UTF-8' + crlf +

        'Content-Transfer-Encoding: 8bit' + crlf + crlf +

        '{\n"header": {\n"status": {\n"code": "200",\n"description": "success"\n}\n}' + crlf +

        '------=your boundry' + crlf +

        'Content-Type: application/pdf; name=text.pdf' + crlf +

        'Content-Transfer-Encoding: binary' + crlf +

        'Content-ID: <text.pdf>' + crlf +

        'Content-Disposition: attachment; name="text.pdf"; filename="text.pdf"' + crlf + crlf;

let multipartMessageEndPart =   crlf + crlf + '------=your boundry';

let base64 = 'base64 text value for the encoded pdf';

let buff = Buffer.from(base64, 'base64').toString();

session.output.write(multipartMessageStartPart + buff + multipartMessageEndPart);

var contentType = 'multipart/related; boundary="----=your boundry"; type="application/json"';

------------------------------
Marwan Hesham
------------------------------

> let base64 = 'base64 text value for the encoded pdf';
>
If you don't put in valid PDF base64 encoded, it is not surprising that it does not work.

Try this:
let base64 = 'JVBERi0xLjEKJcKlwrHDqwoKMSAwIG9iagogIDw8IC9UeXBlIC9DYXRhbG9nCiAgICAgL1BhZ2VzIDIgMCBSCiAgPj4KZW5kb2JqCgoyIDAgb2JqCiAgPDwgL1R5cGUgL1BhZ2VzCiAgICAgL0tpZHMgWzMgMCBSXQogICAgIC9Db3VudCAxCiAgICAgL01lZGlhQm94IFswIDAgMzAwIDE0NF0KICA+PgplbmRvYmoKCjMgMCBvYmoKICA8PCAgL1R5cGUgL1BhZ2UKICAgICAgL1BhcmVudCAyIDAgUgogICAgICAvUmVzb3VyY2VzCiAgICAgICA8PCAvRm9udAogICAgICAgICAgIDw8IC9GMQogICAgICAgICAgICAgICA8PCAvVHlwZSAvRm9udAogICAgICAgICAgICAgICAgICAvU3VidHlwZSAvVHlwZTEKICAgICAgICAgICAgICAgICAgL0Jhc2VGb250IC9UaW1lcy1Sb21hbgogICAgICAgICAgICAgICA+PgogICAgICAgICAgID4+CiAgICAgICA+PgogICAgICAvQ29udGVudHMgNCAwIFIKICA+PgplbmRvYmoKCjQgMCBvYmoKICA8PCAvTGVuZ3RoIDU1ID4+CnN0cmVhbQogIEJUCiAgICAvRjEgMTggVGYKICAgIDAgMCBUZAogICAgKEhlbGxvIFdvcmxkKSBUagogIEVUCmVuZHN0cmVhbQplbmRvYmoKCnhyZWYKMCA1CjAwMDAwMDAwMDAgNjU1MzUgZiAKMDAwMDAwMDAxOCAwMDAwMCBuIAowMDAwMDAwMDc3IDAwMDAwIG4gCjAwMDAwMDAxNzggMDAwMDAgbiAKMDAwMDAwMDQ1NyAwMDAwMCBuIAp0cmFpbGVyCiAgPDwgIC9Sb290IDEgMCBSCiAgICAgIC9TaXplIDUKICA+PgpzdGFydHhyZWYKNTY1CiUlRU9GCg==';

You should see "Hello World" (from here).

For test in browser as data link, copy into your browser address bar:

data:application/pdf;base64,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

------------------------------
Hermann Stamm-Wilbrandt
Compiler Level 3 support & Fixpack team lead
IBM DataPower Gateways (⬚ᵈᵃᵗᵃ / ⣏⠆⡮⡆⢹⠁⡮⡆⡯⠂⢎⠆⡧⡇⣟⡃⡿⡃)
https://stamm-wilbrandt.de/en/blog/
------------------------------

Original Message:
Sent: Thu July 27, 2023 03:52 AM
From: Marwan Hesham
Subject: IBM Data Power decoding issue

Thanks a lot, I have tried it but I have another question how can I create a pdf and then attached it to the response message, and in what format (for example utf-8, hex )do I need to create a pdf cause I have tried this code but the pdf isn't correct

let crlf = '\r\n';

// your boundry is a string starts with _Part and then some numbers

let multipartMessageStartPart = '------=your boundry' + crlf +

        'Content-Type: application/json; charset=UTF-8' + crlf +

        'Content-Transfer-Encoding: 8bit' + crlf + crlf +

        '{\n"header": {\n"status": {\n"code": "200",\n"description": "success"\n}\n}' + crlf +

        '------=your boundry' + crlf +

        'Content-Type: application/pdf; name=text.pdf' + crlf +

        'Content-Transfer-Encoding: binary' + crlf +

        'Content-ID: <text.pdf>' + crlf +

        'Content-Disposition: attachment; name="text.pdf"; filename="text.pdf"' + crlf + crlf;

let multipartMessageEndPart =   crlf + crlf + '------=your boundry';

let base64 = 'base64 text value for the encoded pdf';

let buff = Buffer.from(base64, 'base64').toString();

session.output.write(multipartMessageStartPart + buff + multipartMessageEndPart);

var contentType = 'multipart/related; boundary="----=your boundry"; type="application/json"';

------------------------------
Marwan Hesham
------------------------------


Original Message:
Sent: Thu July 27, 2023 02:30 AM
From: Hermann Stamm-Wilbrandt
Subject: IBM Data Power decoding issue

Hi, "Buffer" is the GatewayScript datatype for data up to 1GB size.
Use ".from(str, 'base64')" to do the conversion you want:
buffer object

Short demo with node in Linux shell:

$ str=`echo -n "foobar" | base64`
$ node -e "console.log(Buffer.from('$str', 'base64'))"
<Buffer 66 6f 6f 62 61 72>
$ 

------------------------------
Hermann Stamm-Wilbrandt
Compiler Level 3 support
IBM DataPower Gateways (⬚ᵈᵃᵗᵃ / ⣏⠆⡮⡆⢹⠁⡮⡆⡯⠂⢎⠆⡧⡇⣟⡃⡿⡃)
https://stamm-wilbrandt.de/en/blog/

Hello Marwan,

The scenario I have been given is similar to the one that you have implemented.

I'd be grateful if you could outline the approach you took and share any supporting code or references for guidance

------------------------------
Kumar
------------------------------