AIX

AIX

Connect with fellow AIX users and experts to gain knowledge, share insights, and solve problems.


#Power
#Power
 View Only

  • 1.  errpt Label : ELXENT_MBX_ERR

    Posted Sun November 25, 2012 07:58 PM

    Originally posted by: kykwon


    Dear all
    Os version : 6100-07-04-1216
    our system has been occurred a message as below
    and is there any problem the server?

    1.errpt -a
    LABEL: ELXENT_MBX_ERR
    IDENTIFIER: C34E2754

    Date/Time: Sun Nov 25 09:31:46 KST 2012
    Sequence Number: 519
    Machine Id: 00C25B674C00
    Node Id: sssss
    Class: H
    Type: PERM
    WPAR: Global
    Resource Name: ent5
    Resource Class: adapter
    Resource Type: a2191007d203000
    Location: U78C0.001.DBJ2062-P2-C8-T4

    VPD:
    Int Multifunction Card w/ Base-TX 10/100/1000 1GbE:
    Network Address.............6CAE8B440253
    ROM Level.(alterable).......0400003260003

    Description
    ADAPTER ERROR

    Recommended Actions
    PERFORM PROBLEM DETERMINATION PROCEDURES

    Detail Data
    FILE NAME
    line: 451 file: elxent_prim.c
    PCI ETHERNET STATISTICS
    0017 5DE8 0061 0953 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000
    0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000
    0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000
    0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000
    0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000
    0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000
    0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000
    0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000
    0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000
    0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000
    0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000
    0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000
    0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000
    0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 5555 5555
    0000 1D00 0000 0200 6CAE 8B44 0253 0000
    DEVICE DRIVER INTERNAL STATE

    2. entstat -d en5
    ETHERNET STATISTICS (en5) :
    Device Type: Int Multifunction Card w/ Base-TX 10/100/1000 1GbE Adapter
    Hardware Address: 6c:ae:8b:44:02:53
    Elapsed Time: 0 days 0 hours 0 minutes 0 seconds

    Transmit Statistics: Receive Statistics:
    Packets: 0 Packets: 0
    Bytes: 0 Bytes: 0
    Interrupts: 0 Interrupts: 0
    Transmit Errors: 0 Receive Errors: 0
    Packets Dropped: 0 Packets Dropped: 0
    Bad Packets: 0
    Max Packets on S/W Transmit Queue: 0
    S/W Transmit Queue Overflow: 0
    Current S/W+H/W Transmit Queue Length: 0

    Broadcast Packets: 0 Broadcast Packets: 0
    Multicast Packets: 0 Multicast Packets: 0
    No Carrier Sense: 0 CRC Errors: 0
    DMA Underrun: 0 DMA Overrun: 0
    Lost CTS Errors: 0 Alignment Errors: 0
    Max Collision Errors: 0 No Resource Errors: 0
    Late Collision Errors: 0 Receive Collision Errors: 0
    Deferred: 0 Packet Too Short Errors: 0
    SQE Test: 0 Packet Too Long Errors: 0
    Timeout Errors: 0 Packets Discarded by Adapter: 0
    Single Collision Count: 0 Receiver Start Count: 0
    Multiple Collision Count: 0
    Current HW Transmit Queue Length: 0

    General Statistics:
    No mbuf Errors: 0
    Adapter Reset Count: 0
    Adapter Data Rate: 0
    Driver Flags: Up Broadcast Simplex
    Limbo 64BitSupport ChecksumOffload
    LargeSend DataRateSet

    Int Multifunction Card w/ Base-TX 10/100/1000 1GbE Adapter (a21910071410d203) Specific Statistics:
    Link Status: Down
    Reason: Unknown
    Media Speed Selected: Auto negotiation
    Media Speed Running: Unknown
    PCI Mode: PCI-Express X8
    Relaxed Ordering: Disabled
    TLP Size: 512
    MRR Size: 4096
    PCIe Link Speed: 5.0 Gbps
    Firmware Operating Mode: Native
    Jumbo Frames: Disabled
    Transmit TCP segmentation offload: Enabled
    Receive TCP segment aggregation: Enabled
    Transmit and receive flow control status: Enabled
    Number of XOFF packets transmitted: 0
    Number of XON packets transmitted: 0
    Number of XOFF packets received: 0
    Number of XON packets received: 0
    Receive statistics for RXQ number: 0
    Number of receive interrupts: 0
    Number of receive packets: 0
    Number of receive bytes: 0
    Number of receive packet drops: 0
    Number of RX mbufs allocated from system pool: 0
    Number of system pool RX mbuf allocation failures: 0
    Number of empty EQ events: 0
    Number of no fragment errors: 0
    Number of rx_limit events: 0
    TCP segment aggregation large packets created: 0
    TCP packets aggregated into large packets: 0
    TCP payload bytes aggregated into large packets: 0
    TCP segment aggregation average packets aggregated: 1
    TCP segment aggregation maximum packets aggregated: 0
    Transmit statistics for TXQ number: 0
    Number of transmit packets: 0
    Number of transmit bytes: 0
    Number of transmit packet drops: 0
    Number of transmit queue overflows: 0
    TCP segmentation offload packets transmitted: 0
    TCP segmentation offload maximum packet size: 0
    Maximum entries used on this transmit queue: 0
    #AIX-Forum


  • 2.  Re: errpt Label : ELXENT_MBX_ERR

    Posted Wed December 05, 2012 08:37 AM

    Originally posted by: null


    Did you ever get this resolved? We have run into this issue (or similiar) on 6 different 9117-MMDs. It appears to be specific to some interaction between A/P Etherchannels (no LACP) and the Integrated Multifunction Card -- possibly related to how the device driver handles ARPs. We currently have a PMR open and are waiting for an iFix.
    #AIX-Forum


Related Content