hi all,

we are using wm9.6 (without any fixes).

from within java thread (which is not running in the context of IS), i would like to invoke a service on IS.

i’m failing to connect to the IS.

my program
new context()
context.connect (server, username, passwd)

this connect fails with two exceptions

jvm 1 | Cannot connect to server “localhost:5555”
jvm 1 | com.wm.net.NetException: [ISC.0064.9324] Server Error: 502 internal e
rror - server connection terminated
jvm 1 | at com.wm.app.b2b.client.Context.invoke(Context.java:1038)
jvm 1 | at com.wm.app.b2b.client.Context.invoke(Context.java:851)
jvm 1 | at com.wm.app.b2b.client.Context.connect(Context.java:570)
jvm 1 | at com.wm.app.b2b.client.Context.connect(Context.java:521)
jvm 1 | at CustomerUpdates.MsgHandling$1.handleCUMessage(MsgHandling.jav
a:447)
jvm 1 | at CustomerUpdates.MsgHandling$1.handleDelivery(MsgHandling.java
:386)
jvm 1 | at com.rabbitmq.client.impl.ConsumerDispatcher$5.run(ConsumerDis
patcher.java:144)
jvm 1 | at com.rabbitmq.client.impl.ConsumerWorkService$WorkPoolRunnable
.run(ConsumerWorkService.java:99)
jvm 1 | at java.util.concurrent.ThreadPoolExecutor.runWorker(ThreadPoolE
xecutor.java:1145)
jvm 1 | at java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPool
Executor.java:615)
jvm 1 | at java.lang.Thread.run(Thread.java:744)
jvm 1 | Caused by: com.wm.net.NetException: [ISC.0064.9324] Server Error: 502
internal error - server connection terminated
jvm 1 | at com.wm.net.NetURLConnection._getInputStream(NetURLConnection.
java:700)
jvm 1 | at com.wm.net.NetURLConnection.getInputStream(NetURLConnection.j
ava:333)
jvm 1 | at com.wm.app.b2b.client.Context.invoke(Context.java:943)
jvm 1 | … 10 more
jvm 1 | com.wm.app.b2b.client.ServiceException: [ISC.0036.9101] Not connected
to server
jvm 1 | at com.wm.app.b2b.client.BaseContext.checkConnection(BaseContext
.java:342)
jvm 1 | at com.wm.app.b2b.client.Context.invoke(Context.java:862)
jvm 1 | at com.wm.app.b2b.client.Context.invoke(Context.java:387)
jvm 1 | at CustomerUpdates.MsgHandling$1.handleCUMessage(MsgHandling.jav
a:463)
jvm 1 | at CustomerUpdates.MsgHandling$1.handleDelivery(MsgHandling.java
:386)
jvm 1 | at com.rabbitmq.client.impl.ConsumerDispatcher$5.run(ConsumerDis
patcher.java:144)
jvm 1 | at com.rabbitmq.client.impl.ConsumerWorkService$WorkPoolRunnable
.run(ConsumerWorkService.java:99)
jvm 1 | at java.util.concurrent.ThreadPoolExecutor.runWorker(ThreadPoolE
xecutor.java:1145)
jvm 1 | at java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPool
Executor.java:615)

any help is appreciated

thanks and regards
ajay kumar kasam

jvm 1 | com.wm.app.b2b.client.ServiceException: [ISC.0036.9107] Transport err
or encountered
jvm 1 | at com.wm.app.b2b.client.Context.connect(Context.java:573)
jvm 1 | at com.wm.app.b2b.client.Context.connect(Context.java:521)
jvm 1 | at MsgHandling$1.handleOUMessage(MsgHandling.java:301)
jvm 1 | at MsgHandling$1.handleDelivery(MsgHandling.java:253)
jvm 1 | at com.rabbitmq.client.impl.ConsumerDispatcher$5.run(ConsumerDis
patcher.java:144)
jvm 1 | at com.rabbitmq.client.impl.ConsumerWorkService$WorkPoolRunnable
.run(ConsumerWorkService.java:99)
jvm 1 | at java.util.concurrent.ThreadPoolExecutor.runWorker(ThreadPoolE
xecutor.java:1145)
jvm 1 | at java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPool
Executor.java:615)
jvm 1 | at java.lang.Thread.run(Thread.java:744)

misconfiguration from my side. issue resolved

Hi All,

Could anyone please help me with this error, faced while deploying the Model build:

com.wm.deployer.common.DeployerException: com.wm.deployer.common.DeployerException: [ISC.0036.9101] Not connected to server

Version : 8.2.

Regards
Priya

I have checked with the server for which this error is encountered. The server is up and test connection is successful.

Regards
Priya

Hi Priya,

please check that the remote server definition on the target is pointing to itself and is working correctly.
Additionally check that the WmDesigner has a logicial server configured to point to this (local) remote server entry.

Deployer uses this informations indirectly for BPM deployments by using the logical server alias on the target server to resolve the conncections.

Regards,
Holger

Thank you Holger. That worked

Thanks a lot.

Regards
Priya

Hi Holger,

Many thanks for responding and helping me on my previous query.

I got another hurdle where when deploying Model Build, while simulating I am getting ‘No Deployment History’.

Could you please provide some idea in this as when this situation is encountered.

Regards
Priya

Hi Priya,

is this before you simulate of after you simulate the candidate?

A fresh new candidate does not have a deployment history, after the simulation there should be a simulation report listed.
If not this is considered a bug and needs to be investigated.

Regards,
Holger

Hi Holger,

It was a fresh deployment only. But after clicking on Simulation, no report was getting generated. It was a server issue. I were able to deploy the build successfully.

Anways, as always thank you so much for your response.

Whenever I get stuck at any point I feel this forum to be the best place where I can expect to get solution to my queries.

Its been 3 months for me in webMethods and really thankful to all the help and guidance I have been reciving in this forum.

Having said that, I am right now stuck in testing phase where after deployment of the BPO, I need to create one instance in MWS of that BPO(be it completed/failed) does not matter.

But I am not able to do so. I am entering data in interface and debugging the service, even thoguh it is successful in Interface, nothing is gtting logged on in implementation/MWS.

Could you please help me with this. I ahve around 20 BPO’s to perform testing

Regards
Priya

Hi Priya,

please check if the BPOs are enabled for execution and if the logging settings of the BPOs are correct.

Regards,
Holger

Hi Holger,

I have checked for the following:

BPO’s - enabled
log file path - correct(in log4j properties file)
Broker - connected(in IS page)
extended settings - correct(in IS page wsel etc. files)
webservice - configured (in IS page)
remote servers - connected and configured (in IS page)
PRT - present and enabled (in IS page)
jdbc pools - connected(in IS page)

Please let me know, where could be the problem. When the request is getting triggered successfully in interface server, why it is not reaching implementation server and in MWS process instance is not getting created.

Is there any possibility of issue lying with the broker.

Please let me know for broker settings what are all the things I need to check in the server, IS , MWS.

Providing success log sample from Interface server:

2017:07:24 20:30:25:365,INFO ,deployer,INFO,null,wm.server.flow:stepFlow,START - WSEL TrackingId: %soapHeaders/HDRDOC1:trackingHeader[0]/requestId% - Request ID: JT - MSISDN: 447528055123 - UserId: pay_dd - Use Case: SubscribeEvent - Channel Code: JT - Enduser Code: JT - ddBundleId: JT_DD_005 - PaymentsMessageType: DD_PAYMENT_SUCCESSFUL - BacsReference: 129597742-2017179
2017:07:24 20:31:18:185,INFO ,deployer,INFO,null,wm.server.flow:stepFlow,START - WSEL Request ID: %soapHeaders/HDRDOC1:trackingHeader[0]/requestId% - Request ID: JT - BusinessProcessState Id: NOT_AVAILABLE - BusinessProcessState UpdateStatus: SUBMITTED - ChannelCode: JT EnduserCode: JT - UsecaseName: SubscribeEvent Key: 447528055123
2017:07:24 20:32:41:240,INFO ,deployer,INFO,null,wm.server.flow:stepFlow,FINISH - WSEL Request ID: %soapHeaders/HDRDOC1:trackingHeader[0]/requestId% - Request ID: JT - BusinessProcessState Id: NOT_AVAILABLE - BusinessProcessState UpdateStatus: SUBMITTED - ChannelCode: JT EnduserCode: JT - UsecaseName: SubscribeEvent Key: 447528055123
2017:07:24 20:32:56:237,INFO ,deployer,INFO,null,wm.server.flow:stepFlow,FINISH - WSEL TrackingId: %soapHeaders/HDRDOC1:trackingHeader[0]/requestId% - Request ID: JT - MSISDN: 447528055123 - UserId: pay_dd - Use Case: SubscribeEvent - Channel Code: JT - Enduser Code: JT - ddBundleId: JT_DD_005 - PaymentsMessageType: DD_PAYMENT_SUCCESSFUL - BacsReference: 129597742-2017179

Regards
Priya