Thanks for reporting this. We will look into 1.0 version. 

Thanks for reporting this. We will look into 1.0 version. 

Hello Ayappan 

Do you have the ETA for when you can look at this

Thanks
Hector

Thanks for reporting this. We will look into 1.0 version. 

We are looking into the 1.0 version , right now. I can't provide a ETA now. I will have more update next week. 

Hello Ayappan 

Do you have the ETA for when you can look at this

Thanks
Hector

Thanks for reporting this. We will look into 1.0 version. 

The ClamAV 1.0 version requires rust compiler which is not yet available in AIX. So we will go with 0.103 LTS version for the time being. 

We are looking into the 1.0 version , right now. I can't provide a ETA now. I will have more update next week. 

Hello Ayappan 

Do you have the ETA for when you can look at this

Thanks
Hector

Thanks for reporting this. We will look into 1.0 version. 

Ayappan

I'm checking if you have an estimate when 0.103 LTS will be available for download from the AIX toolbox

Regards

The ClamAV 1.0 version requires rust compiler which is not yet available in AIX. So we will go with 0.103 LTS version for the time being. 

We are looking into the 1.0 version , right now. I can't provide a ETA now. I will have more update next week. 

Hello Ayappan 

Do you have the ETA for when you can look at this

Thanks
Hector

Thanks for reporting this. We will look into 1.0 version. 

We are working on it. We will try to publish it in a couple of weeks

Ayappan

I'm checking if you have an estimate when 0.103 LTS will be available for download from the AIX toolbox

Regards

The ClamAV 1.0 version requires rust compiler which is not yet available in AIX. So we will go with 0.103 LTS version for the time being. 

We are looking into the 1.0 version , right now. I can't provide a ETA now. I will have more update next week. 

Hello Ayappan 

Do you have the ETA for when you can look at this

Thanks
Hector

Thanks for reporting this. We will look into 1.0 version. 

Ayappan are you any closer to having a delivery date

We are working on it. We will try to publish it in a couple of weeks

Ayappan

I'm checking if you have an estimate when 0.103 LTS will be available for download from the AIX toolbox

Regards

The ClamAV 1.0 version requires rust compiler which is not yet available in AIX. So we will go with 0.103 LTS version for the time being. 

We are looking into the 1.0 version , right now. I can't provide a ETA now. I will have more update next week. 

Hello Ayappan 

Do you have the ETA for when you can look at this

Thanks
Hector

Thanks for reporting this. We will look into 1.0 version. 

We have built & tested the 0.103.8 clamav version. Since this is major version update in Toolbox, there is some legal process involved before publishing it which might take some time. I don't have any ETA right now but hopefully it can be published before April end. 

Ayappan are you any closer to having a delivery date

We are working on it. We will try to publish it in a couple of weeks

Ayappan

I'm checking if you have an estimate when 0.103 LTS will be available for download from the AIX toolbox

Regards

The ClamAV 1.0 version requires rust compiler which is not yet available in AIX. So we will go with 0.103 LTS version for the time being. 

We are looking into the 1.0 version , right now. I can't provide a ETA now. I will have more update next week. 

Hello Ayappan 

Do you have the ETA for when you can look at this

Thanks
Hector

Thanks for reporting this. We will look into 1.0 version. 

Hi

Checking on the progress of the legal process and if a release date has been finalised.

Thanks

We have built & tested the 0.103.8 clamav version. Since this is major version update in Toolbox, there is some legal process involved before publishing it which might take some time. I don't have any ETA right now but hopefully it can be published before April end. 

Ayappan are you any closer to having a delivery date

We are working on it. We will try to publish it in a couple of weeks

Ayappan

I'm checking if you have an estimate when 0.103 LTS will be available for download from the AIX toolbox

Regards

The ClamAV 1.0 version requires rust compiler which is not yet available in AIX. So we will go with 0.103 LTS version for the time being. 

We are looking into the 1.0 version , right now. I can't provide a ETA now. I will have more update next week. 

Hello Ayappan 

Do you have the ETA for when you can look at this

Thanks
Hector

Thanks for reporting this. We will look into 1.0 version. 

We have everything in place now. It will be available this week. 

Hi

Checking on the progress of the legal process and if a release date has been finalised.

Thanks

We have built & tested the 0.103.8 clamav version. Since this is major version update in Toolbox, there is some legal process involved before publishing it which might take some time. I don't have any ETA right now but hopefully it can be published before April end. 

Ayappan are you any closer to having a delivery date

We are working on it. We will try to publish it in a couple of weeks

Ayappan

I'm checking if you have an estimate when 0.103 LTS will be available for download from the AIX toolbox

Regards

The ClamAV 1.0 version requires rust compiler which is not yet available in AIX. So we will go with 0.103 LTS version for the time being. 

We are looking into the 1.0 version , right now. I can't provide a ETA now. I will have more update next week. 

Hello Ayappan 

Do you have the ETA for when you can look at this

Thanks
Hector

Thanks for reporting this. We will look into 1.0 version. 

clamav 0.103.8 is made available in Toolbox recently. 

We have everything in place now. It will be available this week. 

Hi

Checking on the progress of the legal process and if a release date has been finalised.

Thanks

We have built & tested the 0.103.8 clamav version. Since this is major version update in Toolbox, there is some legal process involved before publishing it which might take some time. I don't have any ETA right now but hopefully it can be published before April end. 

Ayappan are you any closer to having a delivery date

We are working on it. We will try to publish it in a couple of weeks

Ayappan

I'm checking if you have an estimate when 0.103 LTS will be available for download from the AIX toolbox

Regards

The ClamAV 1.0 version requires rust compiler which is not yet available in AIX. So we will go with 0.103 LTS version for the time being. 

We are looking into the 1.0 version , right now. I can't provide a ETA now. I will have more update next week. 

Hello Ayappan 

Do you have the ETA for when you can look at this

Thanks
Hector

Thanks for reporting this. We will look into 1.0 version. 

clamav 0.103.8 is made available in Toolbox recently. 

We have everything in place now. It will be available this week. 

Hi

Checking on the progress of the legal process and if a release date has been finalised.

Thanks

We have built & tested the 0.103.8 clamav version. Since this is major version update in Toolbox, there is some legal process involved before publishing it which might take some time. I don't have any ETA right now but hopefully it can be published before April end. 

Ayappan are you any closer to having a delivery date

We are working on it. We will try to publish it in a couple of weeks

Ayappan

I'm checking if you have an estimate when 0.103 LTS will be available for download from the AIX toolbox

Regards

The ClamAV 1.0 version requires rust compiler which is not yet available in AIX. So we will go with 0.103 LTS version for the time being. 

We are looking into the 1.0 version , right now. I can't provide a ETA now. I will have more update next week. 

Hello Ayappan 

Do you have the ETA for when you can look at this

Thanks
Hector

Thanks for reporting this. We will look into 1.0 version. 

clamav 0.103 will be EOS in September 2024

Please can you make LTS version 1.0 available.

clamav 0.103.8 is made available in Toolbox recently. 

We have everything in place now. It will be available this week. 

Hi

Checking on the progress of the legal process and if a release date has been finalised.

Thanks

We have built & tested the 0.103.8 clamav version. Since this is major version update in Toolbox, there is some legal process involved before publishing it which might take some time. I don't have any ETA right now but hopefully it can be published before April end. 

Ayappan are you any closer to having a delivery date

We are working on it. We will try to publish it in a couple of weeks

Ayappan

I'm checking if you have an estimate when 0.103 LTS will be available for download from the AIX toolbox

Regards

The ClamAV 1.0 version requires rust compiler which is not yet available in AIX. So we will go with 0.103 LTS version for the time being. 

We are looking into the 1.0 version , right now. I can't provide a ETA now. I will have more update next week. 

Hello Ayappan 

Do you have the ETA for when you can look at this

Thanks
Hector

Thanks for reporting this. We will look into 1.0 version. 

Hi Hector,

We will try to release this version or a higher version of Clamav after the release of Rust 1.77.0 in the toolbox, which will happen in 2Q, since this version of clamav depends on rust. 

clamav 0.103 will be EOS in September 2024

Please can you make LTS version 1.0 available.

clamav 0.103.8 is made available in Toolbox recently. 

We have everything in place now. It will be available this week. 

Hi

Checking on the progress of the legal process and if a release date has been finalised.

Thanks

We have built & tested the 0.103.8 clamav version. Since this is major version update in Toolbox, there is some legal process involved before publishing it which might take some time. I don't have any ETA right now but hopefully it can be published before April end. 

Ayappan are you any closer to having a delivery date

We are working on it. We will try to publish it in a couple of weeks

Ayappan

I'm checking if you have an estimate when 0.103 LTS will be available for download from the AIX toolbox

Regards

The ClamAV 1.0 version requires rust compiler which is not yet available in AIX. So we will go with 0.103 LTS version for the time being. 

We are looking into the 1.0 version , right now. I can't provide a ETA now. I will have more update next week. 

Hello Ayappan 

Do you have the ETA for when you can look at this

Thanks
Hector

Thanks for reporting this. We will look into 1.0 version. 

Hi Aditya do you have an ETA we can plan against?

Hi Hector,

We will try to release this version or a higher version of Clamav after the release of Rust 1.77.0 in the toolbox, which will happen in 2Q, since this version of clamav depends on rust. 

clamav 0.103 will be EOS in September 2024

Please can you make LTS version 1.0 available.

clamav 0.103.8 is made available in Toolbox recently. 

We have everything in place now. It will be available this week. 

Hi

Checking on the progress of the legal process and if a release date has been finalised.

Thanks

We have built & tested the 0.103.8 clamav version. Since this is major version update in Toolbox, there is some legal process involved before publishing it which might take some time. I don't have any ETA right now but hopefully it can be published before April end. 

Ayappan are you any closer to having a delivery date

We are working on it. We will try to publish it in a couple of weeks

Ayappan

I'm checking if you have an estimate when 0.103 LTS will be available for download from the AIX toolbox

Regards

The ClamAV 1.0 version requires rust compiler which is not yet available in AIX. So we will go with 0.103 LTS version for the time being. 

We are looking into the 1.0 version , right now. I can't provide a ETA now. I will have more update next week. 

Hello Ayappan 

Do you have the ETA for when you can look at this

Thanks
Hector

Thanks for reporting this. We will look into 1.0 version. 

Do you have any ETA for us please?

Hi Aditya do you have an ETA we can plan against?

Hi Hector,

We will try to release this version or a higher version of Clamav after the release of Rust 1.77.0 in the toolbox, which will happen in 2Q, since this version of clamav depends on rust. 

clamav 0.103 will be EOS in September 2024

Please can you make LTS version 1.0 available.

clamav 0.103.8 is made available in Toolbox recently. 

We have everything in place now. It will be available this week. 

Hi

Checking on the progress of the legal process and if a release date has been finalised.

Thanks

We have built & tested the 0.103.8 clamav version. Since this is major version update in Toolbox, there is some legal process involved before publishing it which might take some time. I don't have any ETA right now but hopefully it can be published before April end. 

Ayappan are you any closer to having a delivery date

We are working on it. We will try to publish it in a couple of weeks

Ayappan

I'm checking if you have an estimate when 0.103 LTS will be available for download from the AIX toolbox

Regards

The ClamAV 1.0 version requires rust compiler which is not yet available in AIX. So we will go with 0.103 LTS version for the time being. 

We are looking into the 1.0 version , right now. I can't provide a ETA now. I will have more update next week. 

Hello Ayappan 

Do you have the ETA for when you can look at this

Thanks
Hector

Thanks for reporting this. We will look into 1.0 version. 

We are building & testing it now. If everything goes smoothly, probably before end of next week (16th August ) it can be made available in AIX Toolbox. 

Do you have any ETA for us please?

Hi Aditya do you have an ETA we can plan against?

Hi Hector,

We will try to release this version or a higher version of Clamav after the release of Rust 1.77.0 in the toolbox, which will happen in 2Q, since this version of clamav depends on rust. 

clamav 0.103 will be EOS in September 2024

Please can you make LTS version 1.0 available.

clamav 0.103.8 is made available in Toolbox recently. 

We have everything in place now. It will be available this week. 

Hi

Checking on the progress of the legal process and if a release date has been finalised.

Thanks

We have built & tested the 0.103.8 clamav version. Since this is major version update in Toolbox, there is some legal process involved before publishing it which might take some time. I don't have any ETA right now but hopefully it can be published before April end. 

Ayappan are you any closer to having a delivery date

We are working on it. We will try to publish it in a couple of weeks

Ayappan

I'm checking if you have an estimate when 0.103 LTS will be available for download from the AIX toolbox

Regards

The ClamAV 1.0 version requires rust compiler which is not yet available in AIX. So we will go with 0.103 LTS version for the time being. 

We are looking into the 1.0 version , right now. I can't provide a ETA now. I will have more update next week. 

Hello Ayappan 

Do you have the ETA for when you can look at this

Thanks
Hector

Thanks for reporting this. We will look into 1.0 version. 

Do you have any ETA for us please?

Hi Aditya do you have an ETA we can plan against?

Hi Hector,

We will try to release this version or a higher version of Clamav after the release of Rust 1.77.0 in the toolbox, which will happen in 2Q, since this version of clamav depends on rust. 

clamav 0.103 will be EOS in September 2024

Please can you make LTS version 1.0 available.

clamav 0.103.8 is made available in Toolbox recently. 

We have everything in place now. It will be available this week. 

Hi

Checking on the progress of the legal process and if a release date has been finalised.

Thanks

We have built & tested the 0.103.8 clamav version. Since this is major version update in Toolbox, there is some legal process involved before publishing it which might take some time. I don't have any ETA right now but hopefully it can be published before April end. 

Ayappan are you any closer to having a delivery date

We are working on it. We will try to publish it in a couple of weeks

Ayappan

I'm checking if you have an estimate when 0.103 LTS will be available for download from the AIX toolbox

Regards

The ClamAV 1.0 version requires rust compiler which is not yet available in AIX. So we will go with 0.103 LTS version for the time being. 

We are looking into the 1.0 version , right now. I can't provide a ETA now. I will have more update next week. 

Hello Ayappan 

Do you have the ETA for when you can look at this

Thanks
Hector

Thanks for reporting this. We will look into 1.0 version. 

@Hector Speight

Please update to clamav 1.0.6, the LTS version currently being used by the clamav community, by running "dnf upgrade clamav."

I appreciate your patience. 

You might want to refer the article here if you encounter some issues during install.

https://community.ibm.com/community/user/power/discussion/regarding-clamav-and-cryptography-updates#bm1a526a84-bbf2-4182-85b5-e847658c895e

Do you have any ETA for us please?

Hi Aditya do you have an ETA we can plan against?

Hi Hector,

We will try to release this version or a higher version of Clamav after the release of Rust 1.77.0 in the toolbox, which will happen in 2Q, since this version of clamav depends on rust. 

clamav 0.103 will be EOS in September 2024

Please can you make LTS version 1.0 available.

clamav 0.103.8 is made available in Toolbox recently. 

We have everything in place now. It will be available this week. 

Hi

Checking on the progress of the legal process and if a release date has been finalised.

Thanks

We have built & tested the 0.103.8 clamav version. Since this is major version update in Toolbox, there is some legal process involved before publishing it which might take some time. I don't have any ETA right now but hopefully it can be published before April end. 

Ayappan are you any closer to having a delivery date

We are working on it. We will try to publish it in a couple of weeks

Ayappan

I'm checking if you have an estimate when 0.103 LTS will be available for download from the AIX toolbox

Regards

The ClamAV 1.0 version requires rust compiler which is not yet available in AIX. So we will go with 0.103 LTS version for the time being. 

We are looking into the 1.0 version , right now. I can't provide a ETA now. I will have more update next week. 

Hello Ayappan 

Do you have the ETA for when you can look at this

Thanks
Hector

------------------------------
Hector Speight


Original Message:
Sent: Tue February 21, 2023 08:53 AM
From: Ayappan P
Subject: ClamAV 1.0 required

Thanks for reporting this. We will look into 1.0 version. 

Hello Aditya.

    I am receiving the following:

WARNING: Local version: 0.103.11 Recommended version: 0.103.12

It appears there is a new security issue that is fixed in 0.103.12. Do you know when this level will be available in the IBM Toolbox?  Thanks.

          Regards,

           Dave 

@Hector Speight

Please update to clamav 1.0.6, the LTS version currently being used by the clamav community, by running "dnf upgrade clamav."

I appreciate your patience. 

You might want to refer the article here if you encounter some issues during install.

https://community.ibm.com/community/user/power/discussion/regarding-clamav-and-cryptography-updates#bm1a526a84-bbf2-4182-85b5-e847658c895e

Do you have any ETA for us please?

Hi Aditya do you have an ETA we can plan against?

Hi Hector,

We will try to release this version or a higher version of Clamav after the release of Rust 1.77.0 in the toolbox, which will happen in 2Q, since this version of clamav depends on rust. 

clamav 0.103 will be EOS in September 2024

Please can you make LTS version 1.0 available.

clamav 0.103.8 is made available in Toolbox recently. 

We have everything in place now. It will be available this week. 

Hi

Checking on the progress of the legal process and if a release date has been finalised.

Thanks

We have built & tested the 0.103.8 clamav version. Since this is major version update in Toolbox, there is some legal process involved before publishing it which might take some time. I don't have any ETA right now but hopefully it can be published before April end. 

Ayappan are you any closer to having a delivery date

We are working on it. We will try to publish it in a couple of weeks

Ayappan

I'm checking if you have an estimate when 0.103 LTS will be available for download from the AIX toolbox

Regards

The ClamAV 1.0 version requires rust compiler which is not yet available in AIX. So we will go with 0.103 LTS version for the time being. 

We are looking into the 1.0 version , right now. I can't provide a ETA now. I will have more update next week. 

Hello Ayappan 

Do you have the ETA for when you can look at this

Thanks
Hector

------------------------------
Hector Speight

Hello Aditya.

    I am receiving the following:

WARNING: Local version: 0.103.11 Recommended version: 0.103.12

It appears there is a new security issue that is fixed in 0.103.12. Do you know when this level will be available in the IBM Toolbox?  Thanks.

          Regards,

           Dave 

@Hector Speight

Please update to clamav 1.0.6, the LTS version currently being used by the clamav community, by running "dnf upgrade clamav."

I appreciate your patience. 

You might want to refer the article here if you encounter some issues during install.

https://community.ibm.com/community/user/power/discussion/regarding-clamav-and-cryptography-updates#bm1a526a84-bbf2-4182-85b5-e847658c895e

Do you have any ETA for us please?

Hi Aditya do you have an ETA we can plan against?

Hi Hector,

We will try to release this version or a higher version of Clamav after the release of Rust 1.77.0 in the toolbox, which will happen in 2Q, since this version of clamav depends on rust. 

clamav 0.103 will be EOS in September 2024

Please can you make LTS version 1.0 available.

clamav 0.103.8 is made available in Toolbox recently. 

We have everything in place now. It will be available this week. 

Hi

Checking on the progress of the legal process and if a release date has been finalised.

Thanks

We have built & tested the 0.103.8 clamav version. Since this is major version update in Toolbox, there is some legal process involved before publishing it which might take some time. I don't have any ETA right now but hopefully it can be published before April end. 

Ayappan are you any closer to having a delivery date

We are working on it. We will try to publish it in a couple of weeks

Ayappan

I'm checking if you have an estimate when 0.103 LTS will be available for download from the AIX toolbox

Regards

The ClamAV 1.0 version requires rust compiler which is not yet available in AIX. So we will go with 0.103 LTS version for the time being. 

We are looking into the 1.0 version , right now. I can't provide a ETA now. I will have more update next week. 

Hello Ayappan 

Do you have the ETA for when you can look at this

Thanks
Hector

------------------------------
Hector Speight


Original Message:
Sent: Tue February 21, 2023 08:53 AM
From: Ayappan P
Subject: ClamAV 1.0 required

Thanks for reporting this. We will look into 1.0 version. 

Incase you were unaware of the following Security Issues with ClamAV:

ClamAV 0.103.12 is a patch release with the following fixes:

• CVE-2024-20506: Changed the logging module to disable following symlinks on Linux and Unix systems so as to prevent an attacker with existing access to the 'clamd' or 'freshclam' services from using a symlink to corrupt system files.

  This issue affects all currently supported versions. It will be fixed in:

  • 1.4.1
  • 1.3.2
  • 1.0.7
  • 0.103.12

  Thank you to Detlef for identifying this issue.

• CVE-2024-20505: Fixed a possible out-of-bounds read bug in the PDF file parser that could cause a denial-of-service condition.

  This issue affects all currently supported versions. It will be fixed in:

  • 1.4.1
  • 1.3.2
  • 1.0.7
  • 0.103.12
  • See URL https://blog.clamav.net/2024/09/clamav-141-132-107-and-010312-security.html for details.

Hello Aditya.

    I am receiving the following:

WARNING: Local version: 0.103.11 Recommended version: 0.103.12

It appears there is a new security issue that is fixed in 0.103.12. Do you know when this level will be available in the IBM Toolbox?  Thanks.

          Regards,

           Dave 

@Hector Speight

Please update to clamav 1.0.6, the LTS version currently being used by the clamav community, by running "dnf upgrade clamav."

I appreciate your patience. 

You might want to refer the article here if you encounter some issues during install.

https://community.ibm.com/community/user/power/discussion/regarding-clamav-and-cryptography-updates#bm1a526a84-bbf2-4182-85b5-e847658c895e

Do you have any ETA for us please?

Hi Aditya do you have an ETA we can plan against?

Hi Hector,

We will try to release this version or a higher version of Clamav after the release of Rust 1.77.0 in the toolbox, which will happen in 2Q, since this version of clamav depends on rust. 

clamav 0.103 will be EOS in September 2024

Please can you make LTS version 1.0 available.

clamav 0.103.8 is made available in Toolbox recently. 

We have everything in place now. It will be available this week. 

Hi

Checking on the progress of the legal process and if a release date has been finalised.

Thanks

We have built & tested the 0.103.8 clamav version. Since this is major version update in Toolbox, there is some legal process involved before publishing it which might take some time. I don't have any ETA right now but hopefully it can be published before April end. 

Ayappan are you any closer to having a delivery date

We are working on it. We will try to publish it in a couple of weeks

Ayappan

I'm checking if you have an estimate when 0.103 LTS will be available for download from the AIX toolbox

Regards

The ClamAV 1.0 version requires rust compiler which is not yet available in AIX. So we will go with 0.103 LTS version for the time being. 

We are looking into the 1.0 version , right now. I can't provide a ETA now. I will have more update next week. 

Hello Ayappan 

Do you have the ETA for when you can look at this

Thanks
Hector

------------------------------
Hector Speight


Original Message:
Sent: Tue February 21, 2023 08:53 AM
From: Ayappan P
Subject: ClamAV 1.0 required

Thanks for reporting this. We will look into 1.0 version. 

Hello Ayappan 

     Do you have a timeframe of when 0.103.12 will be available in the Toolbox? Your help is appreciated.

      Thanks,

       Dave 

------------------------------
David Marstiller
------------------------------


Original Message:
Sent: Thu September 26, 2024 11:05 AM
From: David Marstiller
Subject: ClamAV 1.0 required

Incase you were unaware of the following Security Issues with ClamAV:

ClamAV 0.103.12 is a patch release with the following fixes:

• CVE-2024-20506: Changed the logging module to disable following symlinks on Linux and Unix systems so as to prevent an attacker with existing access to the 'clamd' or 'freshclam' services from using a symlink to corrupt system files.

  This issue affects all currently supported versions. It will be fixed in:

  • 1.4.1
  • 1.3.2
  • 1.0.7
  • 0.103.12

  Thank you to Detlef for identifying this issue.

• CVE-2024-20505: Fixed a possible out-of-bounds read bug in the PDF file parser that could cause a denial-of-service condition.

  This issue affects all currently supported versions. It will be fixed in:

  • 1.4.1
  • 1.3.2
  • 1.0.7
  • 0.103.12
  • See URL https://blog.clamav.net/2024/09/clamav-141-132-107-and-010312-security.html for details.

------------------------------
David Marstiller


Original Message:
Sent: Thu September 26, 2024 09:19 AM
From: David Marstiller
Subject: ClamAV 1.0 required

Original Message:
Sent: 9/26/2024 9:03:00 AM
From: David Marstiller
Subject: RE: ClamAV 1.0 required

Hello Aditya.

    I am receiving the following:

WARNING: Local version: 0.103.11 Recommended version: 0.103.12

It appears there is a new security issue that is fixed in 0.103.12. Do you know when this level will be available in the IBM Toolbox?  Thanks.

          Regards,

           Dave 

------------------------------
David Marstiller


Original Message:
Sent: Mon September 02, 2024 12:56 AM
From: Aditya Kamath
Subject: ClamAV 1.0 required

@Hector Speight

Please update to clamav 1.0.6, the LTS version currently being used by the clamav community, by running "dnf upgrade clamav."

I appreciate your patience. 

You might want to refer the article here if you encounter some issues during install.

https://community.ibm.com/community/user/power/discussion/regarding-clamav-and-cryptography-updates#bm1a526a84-bbf2-4182-85b5-e847658c895e

------------------------------
Aditya Kamath


Original Message:
Sent: Fri August 02, 2024 04:46 AM
From: Hector Speight
Subject: ClamAV 1.0 required

Do you have any ETA for us please?

------------------------------
Hector Speight


Original Message:
Sent: Tue June 25, 2024 04:50 AM
From: Hector Speight
Subject: ClamAV 1.0 required

Hi Aditya do you have an ETA we can plan against?

------------------------------
Hector Speight


Original Message:
Sent: Wed May 08, 2024 03:46 AM
From: Aditya Kamath
Subject: ClamAV 1.0 required

Hi Hector,

We will try to release this version or a higher version of Clamav after the release of Rust 1.77.0 in the toolbox, which will happen in 2Q, since this version of clamav depends on rust. 

------------------------------
Aditya Kamath


Original Message:
Sent: Tue May 07, 2024 10:45 AM
From: Hector Speight
Subject: ClamAV 1.0 required

clamav 0.103 will be EOS in September 2024

Please can you make LTS version 1.0 available.

------------------------------
Hector Speight


Original Message:
Sent: Tue July 04, 2023 09:35 AM
From: Ayappan P
Subject: ClamAV 1.0 required

clamav 0.103.8 is made available in Toolbox recently. 

------------------------------
Ayappan P


Original Message:
Sent: Mon June 12, 2023 06:56 AM
From: Ayappan P
Subject: ClamAV 1.0 required

We have everything in place now. It will be available this week. 

------------------------------
Ayappan P


Original Message:
Sent: Mon June 12, 2023 05:11 AM
From: Hector Speight
Subject: ClamAV 1.0 required

Hi

Checking on the progress of the legal process and if a release date has been finalised.

Thanks

------------------------------
Hector Speight


Original Message:
Sent: Fri April 14, 2023 04:32 AM
From: Ayappan P
Subject: ClamAV 1.0 required

We have built & tested the 0.103.8 clamav version. Since this is major version update in Toolbox, there is some legal process involved before publishing it which might take some time. I don't have any ETA right now but hopefully it can be published before April end. 

------------------------------
Ayappan P


Original Message:
Sent: Fri April 14, 2023 04:22 AM
From: Hector Speight
Subject: ClamAV 1.0 required

Ayappan are you any closer to having a delivery date

------------------------------
Hector Speight


Original Message:
Sent: Mon March 27, 2023 10:25 AM
From: Ayappan P
Subject: ClamAV 1.0 required

We are working on it. We will try to publish it in a couple of weeks

------------------------------
Ayappan P


Original Message:
Sent: Mon March 27, 2023 05:41 AM
From: Hector Speight
Subject: ClamAV 1.0 required

Ayappan

I'm checking if you have an estimate when 0.103 LTS will be available for download from the AIX toolbox

Regards

------------------------------
Hector Speight


Original Message:
Sent: Thu March 16, 2023 05:31 AM
From: Ayappan P
Subject: ClamAV 1.0 required

The ClamAV 1.0 version requires rust compiler which is not yet available in AIX. So we will go with 0.103 LTS version for the time being. 

------------------------------
Ayappan P


Original Message:
Sent: Wed March 15, 2023 08:40 AM
From: Ayappan P
Subject: ClamAV 1.0 required

We are looking into the 1.0 version , right now. I can't provide a ETA now. I will have more update next week. 

------------------------------
Ayappan P


Original Message:
Sent: Tue March 14, 2023 11:40 AM
From: Hector Speight
Subject: ClamAV 1.0 required

Hello Ayappan 

Do you have the ETA for when you can look at this

Thanks
Hector

------------------------------
Hector Speight


Original Message:
Sent: Tue February 21, 2023 08:53 AM
From: Ayappan P
Subject: ClamAV 1.0 required

Thanks for reporting this. We will look into 1.0 version. 

------------------------------
Ayappan P

Hi David,

Thank you for the report. We will update Clamav to 1.0.7. Expect a release in the 3rd week of October.

Hello Ayappan 

     Do you have a timeframe of when 0.103.12 will be available in the Toolbox? Your help is appreciated.

      Thanks,

       Dave 

Incase you were unaware of the following Security Issues with ClamAV:

ClamAV 0.103.12 is a patch release with the following fixes:

• CVE-2024-20506: Changed the logging module to disable following symlinks on Linux and Unix systems so as to prevent an attacker with existing access to the 'clamd' or 'freshclam' services from using a symlink to corrupt system files.

  This issue affects all currently supported versions. It will be fixed in:

  • 1.4.1
  • 1.3.2
  • 1.0.7
  • 0.103.12

  Thank you to Detlef for identifying this issue.

• CVE-2024-20505: Fixed a possible out-of-bounds read bug in the PDF file parser that could cause a denial-of-service condition.

  This issue affects all currently supported versions. It will be fixed in:

  • 1.4.1
  • 1.3.2
  • 1.0.7
  • 0.103.12
  • See URL https://blog.clamav.net/2024/09/clamav-141-132-107-and-010312-security.html for details.

Hello Aditya.

    I am receiving the following:

WARNING: Local version: 0.103.11 Recommended version: 0.103.12

It appears there is a new security issue that is fixed in 0.103.12. Do you know when this level will be available in the IBM Toolbox?  Thanks.

          Regards,

           Dave 

@Hector Speight

Please update to clamav 1.0.6, the LTS version currently being used by the clamav community, by running "dnf upgrade clamav."

I appreciate your patience. 

You might want to refer the article here if you encounter some issues during install.

https://community.ibm.com/community/user/power/discussion/regarding-clamav-and-cryptography-updates#bm1a526a84-bbf2-4182-85b5-e847658c895e

Do you have any ETA for us please?

Hi Aditya do you have an ETA we can plan against?

Hi Hector,

We will try to release this version or a higher version of Clamav after the release of Rust 1.77.0 in the toolbox, which will happen in 2Q, since this version of clamav depends on rust. 

clamav 0.103 will be EOS in September 2024

Please can you make LTS version 1.0 available.

clamav 0.103.8 is made available in Toolbox recently. 

We have everything in place now. It will be available this week. 

Hi

Checking on the progress of the legal process and if a release date has been finalised.

Thanks

We have built & tested the 0.103.8 clamav version. Since this is major version update in Toolbox, there is some legal process involved before publishing it which might take some time. I don't have any ETA right now but hopefully it can be published before April end. 

Ayappan are you any closer to having a delivery date

We are working on it. We will try to publish it in a couple of weeks

Ayappan

I'm checking if you have an estimate when 0.103 LTS will be available for download from the AIX toolbox

Regards

The ClamAV 1.0 version requires rust compiler which is not yet available in AIX. So we will go with 0.103 LTS version for the time being. 

We are looking into the 1.0 version , right now. I can't provide a ETA now. I will have more update next week. 

Hello Ayappan 

Do you have the ETA for when you can look at this

Thanks
Hector

------------------------------
Hector Speight


Original Message:
Sent: Tue February 21, 2023 08:53 AM
From: Ayappan P
Subject: ClamAV 1.0 required

Thanks for reporting this. We will look into 1.0 version. 

@David Marstiller By Tuesday [8/10/2024], AIX users will get the update to clamav - 1.0.7. 

Hi David,

Thank you for the report. We will update Clamav to 1.0.7. Expect a release in the 3rd week of October.

Hello Ayappan 

     Do you have a timeframe of when 0.103.12 will be available in the Toolbox? Your help is appreciated.

      Thanks,

       Dave 

Incase you were unaware of the following Security Issues with ClamAV:

ClamAV 0.103.12 is a patch release with the following fixes:

• CVE-2024-20506: Changed the logging module to disable following symlinks on Linux and Unix systems so as to prevent an attacker with existing access to the 'clamd' or 'freshclam' services from using a symlink to corrupt system files.

  This issue affects all currently supported versions. It will be fixed in:

  • 1.4.1
  • 1.3.2
  • 1.0.7
  • 0.103.12

  Thank you to Detlef for identifying this issue.

• CVE-2024-20505: Fixed a possible out-of-bounds read bug in the PDF file parser that could cause a denial-of-service condition.

  This issue affects all currently supported versions. It will be fixed in:

  • 1.4.1
  • 1.3.2
  • 1.0.7
  • 0.103.12
  • See URL https://blog.clamav.net/2024/09/clamav-141-132-107-and-010312-security.html for details.

Hello Aditya.

    I am receiving the following:

WARNING: Local version: 0.103.11 Recommended version: 0.103.12

It appears there is a new security issue that is fixed in 0.103.12. Do you know when this level will be available in the IBM Toolbox?  Thanks.

          Regards,

           Dave 

@Hector Speight

Please update to clamav 1.0.6, the LTS version currently being used by the clamav community, by running "dnf upgrade clamav."

I appreciate your patience. 

You might want to refer the article here if you encounter some issues during install.

https://community.ibm.com/community/user/power/discussion/regarding-clamav-and-cryptography-updates#bm1a526a84-bbf2-4182-85b5-e847658c895e

Do you have any ETA for us please?

Hi Aditya do you have an ETA we can plan against?

Hi Hector,

We will try to release this version or a higher version of Clamav after the release of Rust 1.77.0 in the toolbox, which will happen in 2Q, since this version of clamav depends on rust. 

clamav 0.103 will be EOS in September 2024

Please can you make LTS version 1.0 available.

clamav 0.103.8 is made available in Toolbox recently. 

We have everything in place now. It will be available this week. 

Hi

Checking on the progress of the legal process and if a release date has been finalised.

Thanks

We have built & tested the 0.103.8 clamav version. Since this is major version update in Toolbox, there is some legal process involved before publishing it which might take some time. I don't have any ETA right now but hopefully it can be published before April end. 

Ayappan are you any closer to having a delivery date

We are working on it. We will try to publish it in a couple of weeks

Ayappan

I'm checking if you have an estimate when 0.103 LTS will be available for download from the AIX toolbox

Regards

The ClamAV 1.0 version requires rust compiler which is not yet available in AIX. So we will go with 0.103 LTS version for the time being. 

We are looking into the 1.0 version , right now. I can't provide a ETA now. I will have more update next week. 

Hello Ayappan 

Do you have the ETA for when you can look at this

Thanks
Hector

------------------------------
Hector Speight


Original Message:
Sent: Tue February 21, 2023 08:53 AM
From: Ayappan P
Subject: ClamAV 1.0 required

Thanks for reporting this. We will look into 1.0 version. 

Hello Aditya.

    Will you also be updating 0.103.12 version. We are currently at 0.103.11 version?

Thanks for the quick follow-up to this issue. We appreciate it.

       Regards,

         Dave  

@David Marstiller By Tuesday [8/10/2024], AIX users will get the update to clamav - 1.0.7. 

Hi David,

Thank you for the report. We will update Clamav to 1.0.7. Expect a release in the 3rd week of October.

Hello Ayappan 

     Do you have a timeframe of when 0.103.12 will be available in the Toolbox? Your help is appreciated.

      Thanks,

       Dave 

Incase you were unaware of the following Security Issues with ClamAV:

ClamAV 0.103.12 is a patch release with the following fixes:

• CVE-2024-20506: Changed the logging module to disable following symlinks on Linux and Unix systems so as to prevent an attacker with existing access to the 'clamd' or 'freshclam' services from using a symlink to corrupt system files.

  This issue affects all currently supported versions. It will be fixed in:

  • 1.4.1
  • 1.3.2
  • 1.0.7
  • 0.103.12

  Thank you to Detlef for identifying this issue.

• CVE-2024-20505: Fixed a possible out-of-bounds read bug in the PDF file parser that could cause a denial-of-service condition.

  This issue affects all currently supported versions. It will be fixed in:

  • 1.4.1
  • 1.3.2
  • 1.0.7
  • 0.103.12
  • See URL https://blog.clamav.net/2024/09/clamav-141-132-107-and-010312-security.html for details.

Hello Aditya.

    I am receiving the following:

WARNING: Local version: 0.103.11 Recommended version: 0.103.12

It appears there is a new security issue that is fixed in 0.103.12. Do you know when this level will be available in the IBM Toolbox?  Thanks.

          Regards,

           Dave 

@Hector Speight

Please update to clamav 1.0.6, the LTS version currently being used by the clamav community, by running "dnf upgrade clamav."

I appreciate your patience. 

You might want to refer the article here if you encounter some issues during install.

https://community.ibm.com/community/user/power/discussion/regarding-clamav-and-cryptography-updates#bm1a526a84-bbf2-4182-85b5-e847658c895e

Do you have any ETA for us please?

Hi Aditya do you have an ETA we can plan against?

Hi Hector,

We will try to release this version or a higher version of Clamav after the release of Rust 1.77.0 in the toolbox, which will happen in 2Q, since this version of clamav depends on rust. 

clamav 0.103 will be EOS in September 2024

Please can you make LTS version 1.0 available.

clamav 0.103.8 is made available in Toolbox recently. 

We have everything in place now. It will be available this week. 

Hi

Checking on the progress of the legal process and if a release date has been finalised.

Thanks

We have built & tested the 0.103.8 clamav version. Since this is major version update in Toolbox, there is some legal process involved before publishing it which might take some time. I don't have any ETA right now but hopefully it can be published before April end. 

Ayappan are you any closer to having a delivery date

We are working on it. We will try to publish it in a couple of weeks

Ayappan

I'm checking if you have an estimate when 0.103 LTS will be available for download from the AIX toolbox

Regards

The ClamAV 1.0 version requires rust compiler which is not yet available in AIX. So we will go with 0.103 LTS version for the time being. 

We are looking into the 1.0 version , right now. I can't provide a ETA now. I will have more update next week. 

Hello Ayappan 

Do you have the ETA for when you can look at this

Thanks
Hector

------------------------------
Hector Speight


Original Message:
Sent: Tue February 21, 2023 08:53 AM
From: Ayappan P
Subject: ClamAV 1.0 required

Thanks for reporting this. We will look into 1.0 version. 

There is no plan to maintain two versions. Users are recommended to move to 1.0.X version.

Hello Aditya.

    Will you also be updating 0.103.12 version. We are currently at 0.103.11 version?

Thanks for the quick follow-up to this issue. We appreciate it.

       Regards,

         Dave  

@David Marstiller By Tuesday [8/10/2024], AIX users will get the update to clamav - 1.0.7. 

Hi David,

Thank you for the report. We will update Clamav to 1.0.7. Expect a release in the 3rd week of October.

Hello Ayappan 

     Do you have a timeframe of when 0.103.12 will be available in the Toolbox? Your help is appreciated.

      Thanks,

       Dave 

Incase you were unaware of the following Security Issues with ClamAV:

ClamAV 0.103.12 is a patch release with the following fixes:

• CVE-2024-20506: Changed the logging module to disable following symlinks on Linux and Unix systems so as to prevent an attacker with existing access to the 'clamd' or 'freshclam' services from using a symlink to corrupt system files.

  This issue affects all currently supported versions. It will be fixed in:

  • 1.4.1
  • 1.3.2
  • 1.0.7
  • 0.103.12

  Thank you to Detlef for identifying this issue.

• CVE-2024-20505: Fixed a possible out-of-bounds read bug in the PDF file parser that could cause a denial-of-service condition.

  This issue affects all currently supported versions. It will be fixed in:

  • 1.4.1
  • 1.3.2
  • 1.0.7
  • 0.103.12
  • See URL https://blog.clamav.net/2024/09/clamav-141-132-107-and-010312-security.html for details.

Hello Aditya.

    I am receiving the following:

WARNING: Local version: 0.103.11 Recommended version: 0.103.12

It appears there is a new security issue that is fixed in 0.103.12. Do you know when this level will be available in the IBM Toolbox?  Thanks.

          Regards,

           Dave 

@Hector Speight

Please update to clamav 1.0.6, the LTS version currently being used by the clamav community, by running "dnf upgrade clamav."

I appreciate your patience. 

You might want to refer the article here if you encounter some issues during install.

https://community.ibm.com/community/user/power/discussion/regarding-clamav-and-cryptography-updates#bm1a526a84-bbf2-4182-85b5-e847658c895e

Do you have any ETA for us please?

Hi Aditya do you have an ETA we can plan against?

Hi Hector,

We will try to release this version or a higher version of Clamav after the release of Rust 1.77.0 in the toolbox, which will happen in 2Q, since this version of clamav depends on rust. 

clamav 0.103 will be EOS in September 2024

Please can you make LTS version 1.0 available.

clamav 0.103.8 is made available in Toolbox recently. 

We have everything in place now. It will be available this week. 

Hi

Checking on the progress of the legal process and if a release date has been finalised.

Thanks

We have built & tested the 0.103.8 clamav version. Since this is major version update in Toolbox, there is some legal process involved before publishing it which might take some time. I don't have any ETA right now but hopefully it can be published before April end. 

Ayappan are you any closer to having a delivery date

We are working on it. We will try to publish it in a couple of weeks

Ayappan

I'm checking if you have an estimate when 0.103 LTS will be available for download from the AIX toolbox

Regards

The ClamAV 1.0 version requires rust compiler which is not yet available in AIX. So we will go with 0.103 LTS version for the time being. 

We are looking into the 1.0 version , right now. I can't provide a ETA now. I will have more update next week. 

Hello Ayappan 

Do you have the ETA for when you can look at this

Thanks
Hector

------------------------------
Hector Speight


Original Message:
Sent: Tue February 21, 2023 08:53 AM
From: Ayappan P
Subject: ClamAV 1.0 required

Thanks for reporting this. We will look into 1.0 version. 

Hello Ayappan.

          I am confused by your last response. The ToolBox currently does have support for both versions:

There is no plan to maintain two versions. Users are recommended to move to 1.0.X version.

Hello Aditya.

    Will you also be updating 0.103.12 version. We are currently at 0.103.11 version?

Thanks for the quick follow-up to this issue. We appreciate it.

       Regards,

         Dave  

@David Marstiller By Tuesday [8/10/2024], AIX users will get the update to clamav - 1.0.7. 

Hi David,

Thank you for the report. We will update Clamav to 1.0.7. Expect a release in the 3rd week of October.

Hello Ayappan 

     Do you have a timeframe of when 0.103.12 will be available in the Toolbox? Your help is appreciated.

      Thanks,

       Dave 

Incase you were unaware of the following Security Issues with ClamAV:

ClamAV 0.103.12 is a patch release with the following fixes:

• CVE-2024-20506: Changed the logging module to disable following symlinks on Linux and Unix systems so as to prevent an attacker with existing access to the 'clamd' or 'freshclam' services from using a symlink to corrupt system files.

  This issue affects all currently supported versions. It will be fixed in:

  • 1.4.1
  • 1.3.2
  • 1.0.7
  • 0.103.12

  Thank you to Detlef for identifying this issue.

• CVE-2024-20505: Fixed a possible out-of-bounds read bug in the PDF file parser that could cause a denial-of-service condition.

  This issue affects all currently supported versions. It will be fixed in:

  • 1.4.1
  • 1.3.2
  • 1.0.7
  • 0.103.12
  • See URL https://blog.clamav.net/2024/09/clamav-141-132-107-and-010312-security.html for details.

Hello Aditya.

    I am receiving the following:

WARNING: Local version: 0.103.11 Recommended version: 0.103.12

It appears there is a new security issue that is fixed in 0.103.12. Do you know when this level will be available in the IBM Toolbox?  Thanks.

          Regards,

           Dave 

@Hector Speight

Please update to clamav 1.0.6, the LTS version currently being used by the clamav community, by running "dnf upgrade clamav."

I appreciate your patience. 

You might want to refer the article here if you encounter some issues during install.

https://community.ibm.com/community/user/power/discussion/regarding-clamav-and-cryptography-updates#bm1a526a84-bbf2-4182-85b5-e847658c895e

Do you have any ETA for us please?

Hi Aditya do you have an ETA we can plan against?

Hi Hector,

We will try to release this version or a higher version of Clamav after the release of Rust 1.77.0 in the toolbox, which will happen in 2Q, since this version of clamav depends on rust. 

clamav 0.103 will be EOS in September 2024

Please can you make LTS version 1.0 available.

clamav 0.103.8 is made available in Toolbox recently. 

We have everything in place now. It will be available this week. 

Hi

Checking on the progress of the legal process and if a release date has been finalised.

Thanks

We have built & tested the 0.103.8 clamav version. Since this is major version update in Toolbox, there is some legal process involved before publishing it which might take some time. I don't have any ETA right now but hopefully it can be published before April end.