AIX

AIX

Connect with fellow AIX users and experts to gain knowledge, share insights, and solve problems.


#Power
 View Only

  • 1.  AIX Telnet session hangs.

    Posted Thu June 05, 2008 02:46 PM

    Originally posted by: SystemAdmin


    We have a really strange issue going on with our brand new AIX box. It is sitting in our Data Center and connected to our firewall via Cisco 2960 switch.
    We are accessing it over a VPN from our corporate office and every time we telnet into it and run "ls -la" it hangs. However if I telnet into the AIX box from one of our other location it does not hang. Also if I telnet into that AIX box from our switch in our corporate office it does not hang the telnet session either. Its only when we are opening telnet from any of the computers in our corporate LAN.

    Any ideas will be greatly appreciated. Some one I was talking to blamed it on the VLAN and routing however if there was any issue with the VLAN and/or routing I wouldn't be able to get into it from our switch either.
    #AIX-Forum


  • 2.  Re: AIX Telnet session hangs.

    Posted Thu June 05, 2008 05:54 PM

    Originally posted by: jnordtome


    Can you get to anything in your Data Center from the corporate office or is it just this AIX server?

    Are you able to get to anything in your corporate office (past the switch) FROM your AIX server?

    Just trying to get a picture of where the problem might be.
    #AIX-Forum


  • 3.  Re: AIX Telnet session hangs.

    Posted Thu June 05, 2008 07:26 PM

    Originally posted by: SystemAdmin


    Yes I can get to every thing in our DC from our Corporate office on that VLAN as well as others and vice versa. Here is the interesting part.

    Corporate Office Switch(L3): 3 VLAN's
    VLAN1: 10.5.0.0/21
    VLAN2: 10.5.9.0/24
    VLAN3: 10.5.99.0/24

    I can telnet into the AIX box that is in our Data Center from any of the hosts from any of the VLAN's. However every time I run "ls -la" it hangs and then times out.

    Now comes the interesting part. If I telnet into the L3 switch from any of the VLAN's and then telnet into the AIX box from this switch every thing works fine.
    #AIX-Forum


  • 4.  Re: AIX Telnet session hangs.

    Posted Mon June 09, 2008 05:12 AM

    Originally posted by: tony.evans


    What does ifconfig -a show on the server?
    #AIX-Forum


  • 5.  Re: AIX Telnet session hangs.

    Posted Mon June 09, 2008 01:47 PM

    Originally posted by: SystemAdmin


    Issue has been resolved. Hopefully this will help some one else in the same situation. I had to call Juniper for help. Issue was on the two Juniper Netscreen firewalls "tcp-mss" values were not set. Juniper recommends "tcp-mss" value to be 1350. After entering the value on both ends every thing worked beautiful.
    #AIX-Forum


Related Content