Ok - so you might have HA1 malfunctioning.... First of all: make sure hosts rescue wheels are available (IMMs)
If you don't have access to IMM: ask somebody in DC to configure it for you. https://www.ibm.com/docs/pt-br/i/7.1?topic=ssw_ibm_i_71/rzahq/configimm.html
Skip DNS, NTP, LDAP etc... IP, netmask and gateway are sufficient. Make sure no firewall is blocking your traffic to IMM and also preferably use Windows with IE (or EDGE in IE mode): you can have old FW on host .
Once you have IMM working: go to remote console and check what is actual error (press ESC on RHEL boot logo).
------------------------------
Adam Matusewicz
------------------------------
Original Message:
Sent: Wed May 24, 2023 01:21 AM
From: apidesh dulma
Subject: Opwer on/off Ntezza Rack
Hello Sir,
Ok, Today I test Power On/Off Netezza all component. But Node1 boot log time(hang Red Hat 6.10 Logo GUI), cannot boot to login. Node2 boot is very fast 5m. I am not sure Node1 hag process for boot device? You have solution for this issue? Thank you very much.
------------------------------
apidesh dulma
Original Message:
Sent: Fri May 12, 2023 03:45 AM
From: Alberto Marelli
Subject: Opwer on/off Ntezza Rack
https://www.ibm.com/docs/en/psfa/7.2.1?topic=procedures-powering-off-puredata-system-analytics-n200x-system
------------------------------
Alberto Marelli
Original Message:
Sent: Thu May 11, 2023 11:24 PM
From: apidesh dulma
Subject: Opwer on/off Ntezza Rack
Hi all,
We need Power off Netezza N2000 Series, please help provide information for power Off and Power On Netezza N2000 series.
------------------------------
apidesh dulma
A.Aod
------------------------------