@Mubaraq Opeyemi Kolawole Please follow the instructions related to searching the SSIC that @TAKESHI ISHIMOTO provided. As @Darren Sanders stated, you are attempting to connect an Ethernet network adapter to a Fibre Channel port on the drive.
------------------------------
-----------------------------------
Kevin Butt
IBM, Tape Development Ecosystem
Tape SCSI Architect, T10 Representative
------------------------------------
------------------------------
Original Message:
Sent: Tue April 04, 2023 03:03 AM
From: Mubaraq Opeyemi Kolawole
Subject: IBM TS4300 With HH FC drives not connecting directly an HPE server
Hello, @kevin_butt
Thank you for your response.
It is a CNA (HPE FlexFabric 10Gb 2-port FLR-SFP+ 57810S Adapter) and the drives are Ultirium 7 HH FC.
------------------------------
Mubaraq Opeyemi Kolawole
Original Message:
Sent: Tue April 04, 2023 01:59 AM
From: Kevin Butt
Subject: IBM TS4300 With HH FC drives not connecting directly an HPE server
Please provide the generation of the drives. Also, what is the configuration of the HBAs? Not just the manufacture and product name, but the HBA settings as well.
------------------------------
-----------------------------------
Kevin Butt
IBM, Tape Development Ecosystem
Tape SCSI Architect, T10 Representative
Original Message:
Sent: Sat April 01, 2023 05:09 AM
From: Mubaraq Opeyemi Kolawole
Subject: IBM TS4300 With HH FC drives not connecting directly an HPE server
Hello, Team
So, I am currently on this deployment it is an IBM TS4300 tape library with HH FC drives.
The OS is windows server 2019 installed on HPE ProLiant gen 9 server. I have a fiber card with 2 Ports on the server. These ports are meant to connect directly to the tape drives, so, I can view the tape drives or tape devices on my device manager on the server, so, I can make use of it for backup with commvault.
The card on the HPE does not blink when connected to the tape drives with fiber cables, but blinks when connected to a switch. The tape drive blinks when plugged to the switch, too.
I just want the server to be able to connect directly to the tape drives on the library and allow server discover them locally on device manager.
The drives are HH FC and are supposed to connect directly to the server via fiber cable.
------------------------------
Mubaraq Opeyemi Kolawole
------------------------------