AIX Open Source

I have a AIX7100-01 server where I installed Node 14. 

# node -v
exec(): 0509-036 Cannot load program node because of the following errors:
rtld: 0712-001 Symbol aligned_alloc was referenced
from module /opt/freeware/lib/pthread/ppc64/libstdc++.a(libstdc++.so.6), but a runtime definition
of the symbol was not found.
rtld: 0712-002 fatal error: exiting.

I have installed 
libgcc-8.3.0-2
libstdc++-8.3.0-2

I have other servers with AIX 7100-04 which are working okay with this setup. Any ideas on what is causing this error with libstdc++
​

------------------------------
Vandana Sakamuri
------------------------------

aligned_alloc should be provided by libc. Probably AIX 7.1 TL levels below 3 may not be having it. 
We use AIX 7.1 TL 03 as our build machine for AIX 7.1Toolbox rpms.

------------------------------
Ayappan P
------------------------------

Original Message:
Sent: Wed September 21, 2022 09:58 PM
From: Vandana Sakamuri
Subject: Node issue on AIX 7100-01

I have a AIX7100-01 server where I installed Node 14. 

# node -v
exec(): 0509-036 Cannot load program node because of the following errors:
rtld: 0712-001 Symbol aligned_alloc was referenced
from module /opt/freeware/lib/pthread/ppc64/libstdc++.a(libstdc++.so.6), but a runtime definition
of the symbol was not found.
rtld: 0712-002 fatal error: exiting.

I have installed 
libgcc-8.3.0-2
libstdc++-8.3.0-2

I have other servers with AIX 7100-04 which are working okay with this setup. Any ideas on what is causing this error with libstdc++
​

------------------------------
Vandana Sakamuri
------------------------------

I would suggest you to update the TL level.

------------------------------
Ayappan P
------------------------------

Original Message:
Sent: Wed September 21, 2022 09:58 PM
From: Vandana Sakamuri
Subject: Node issue on AIX 7100-01

I have a AIX7100-01 server where I installed Node 14. 

# node -v
exec(): 0509-036 Cannot load program node because of the following errors:
rtld: 0712-001 Symbol aligned_alloc was referenced
from module /opt/freeware/lib/pthread/ppc64/libstdc++.a(libstdc++.so.6), but a runtime definition
of the symbol was not found.
rtld: 0712-002 fatal error: exiting.

I have installed 
libgcc-8.3.0-2
libstdc++-8.3.0-2

I have other servers with AIX 7100-04 which are working okay with this setup. Any ideas on what is causing this error with libstdc++
​

------------------------------
Vandana Sakamuri
------------------------------

Thanks for the reply. I tried version 6 of libstdc++ and that worked. I will work on updating the TL level.

------------------------------
Vandana Sakamuri
------------------------------

Original Message:
Sent: Fri September 23, 2022 02:53 AM
From: Ayappan P
Subject: Node issue on AIX 7100-01

I would suggest you to update the TL level.

------------------------------
Ayappan P

Original Message:
Sent: Wed September 21, 2022 09:58 PM
From: Vandana Sakamuri
Subject: Node issue on AIX 7100-01

I have a AIX7100-01 server where I installed Node 14. 

# node -v
exec(): 0509-036 Cannot load program node because of the following errors:
rtld: 0712-001 Symbol aligned_alloc was referenced
from module /opt/freeware/lib/pthread/ppc64/libstdc++.a(libstdc++.so.6), but a runtime definition
of the symbol was not found.
rtld: 0712-002 fatal error: exiting.

I have installed 
libgcc-8.3.0-2
libstdc++-8.3.0-2

I have other servers with AIX 7100-04 which are working okay with this setup. Any ideas on what is causing this error with libstdc++
​

------------------------------
Vandana Sakamuri
------------------------------