Hi Roland,
Thanks for the information. I have got the same issue mentioned on the thread after the IBM maintenance.
https://community.ibm.com/community/user/ibmz-and-linuxone/discussion/issue-on-cics-starting#bm1dbd7720-c35d-407f-8f5f-b37d5c2b9e9eDuring the IPL I have got the error message for re specifying USSHOME, so I have cancelled the region and I though I can look at the mount issue later on from TSO
DATA INVALID FOR 'USSHOME'. RESPECIFY KEY
WORD AND DATA OR BYPASS WITH '.END': '/usr/lpp/cicsts/cicsts54
From TSO I saw that
/usr/lpp/cicsts/cicsts54 is not having required files under it and also observed that "DFH540.ZFS" is not mounted.So I have tried to mount "DFH540.ZFS" to the path /usr/lpp/cicsts/cicsts54 but I am getting the error "EF186058".
Here is the mount command:
MOUNT FILESYSTEM('DFH540.ZFS')
TYPE(ZFS)
MODE(READ) MOUNTPOINT('/usr/lpp/cicsts/cicsts54')
And here is the MVS DISPLAY command output:
----------------------------------------------------------------
-D OMVS,F,N='DFH540.ZFS'
BPXO042I 00.42.57 DISPLAY OMVS 761
OMVS 000F ACTIVE OMVS=(OM,OZ,SV,90,MS,IF,IE,ID,7C,67,I
'DFH540.ZFS' NOT FOUND
-----------------------------------------------------------
And I have looked at my SYSLOG , I see this error for DFH540.ZFS,could you please check once.
-----------------------------------------------------------------------------------------------------------
IOEZ00001E zFS I/O error 2101520 occurred for aggregate DFH540.ZFS
IOEZ00002E MMRE error id=31 cis=11 if=80 of=5 buf=506511D000 CI=0
IOS000I 1A11,58,WRI,E7,0200,,07E40000,VDDFHI,ZFS , 448
80020000000000000000000000000000000000005A000F00000040E000000000
PREFIX PARAMETER LIST DATA = 01C0008C000000000000000000C00000
0000004C07E4000007E4000000000000
0000000080FE0000000000003F800001
07E4000007E400000106100000130002
80000000
IOS000I 1A11,5A,WRI,E7,0200,,00020000,VDDFHI,CATALOG , 449
80020000000000000000000000000000000000005A000F00000040E000000000
PREFIX PARAMETER LIST DATA = 01C00080000000000000000000C00000
0000004C000200000002000000000000
0000000080FF0000000000003F800001
0002000000020000043B100000130002
80000000
IOS000I 1A11,5A,WRI,E7,0200,,00020000,VDDFHI,CATALOG , 450
80020000000000000000000000000000000000005A000F00000040E000000000
PREFIX PARAMETER LIST DATA = 01C00080000000000000000000C00000
0000004C000200000002000000000000
0000000080FF0000000000003F800001
0002000000020000043B100000130002
0002000000020000043B100000130002
80000000
IEC331I 050-018(00201110,VDDFHI),ZFS,ZFS,VMMC,IGG0CLE2
IEF196I IEC331I 050-018(00201110,VDDFHI),ZFS,ZFS,VMMC,IGG0CLE2
IEF196I IEC251I 037(050,018,IGG0CLE2)-006,ZFS,ZFS,SYS00098,,,DFH540.ZF
IEF196I IEC251I DFH540.ZFS.DATA,CATALOG.DFH540
IEC251I 037(050,018,IGG0CLE2)-006,ZFS,ZFS,SYS00098,,,DFH540.ZFS, 453
IEC251I DFH540.ZFS.DATA,CATALOG.DFH540
IOEZ00953E Media Manager return code 00000008 disconnecting aggregate
456
DFH540.ZFS.
------------------------------
Bujjireddy Regalla
------------------------------
Original Message:
Sent: Tue June 28, 2022 01:49 AM
From: Roland Schiradin
Subject: We have an issue with "DFH540.ZFS" during the IPL,Could you please help us to resolve the issue.
Hi, TSO BPXMTEXT EF186068
zFS Wed Jan 19 13:01:58 EST 2022
Description: HFS-compat mount, - error attaching aggregate or was found not to
be HFS-compat.
Action: Ensure that the HFS compatibility mode aggregate that is being MOUNTed
has a single read-write file system and the file system name is the same as
the aggregate name (that is, the VSAM Linear Data Set name). This can also
mean that you attempted to move ownership of a zFS sysplex-aware read-write
file system to a system that does not support zFS sysplex-aware (that is, it
is z/OS V1R12 but is running sysplex=off). This is not allowed. A mount of a
zFS file system that fails with return code 138 (ENXIO) can indicate that the
file system is already mounted on another system that is not in the same
sysplex but is sharing DASD accessibility. zFS prevents data corruption by not
allowing a zFS file system to be mounted read-write on two systems that are
not in a shared file system environment. In this case, verify that the file
system is not already mounted read-write on another system. zFS prevents a
system from writing to a zFS aggregate that is mounted read-write on another
system. Another possible cause is the VSAM linear data set was not formatted
as a ZFS file system. Also, look in the system log for messages from other
z/OS components related to this aggregate (data set) name. Otherwise, contact
the service representative.
***
------------------------------
Roland Schiradin
Original Message:
Sent: Mon June 27, 2022 01:36 AM
From: Bujjireddy Regalla
Subject: We have an issue with "DFH540.ZFS" during the IPL,Could you please help us to resolve the issue.
Hi Team,
We have an issue with "DFH540.ZFS" during the IPL ,later after IPL we have tried to mount manually but we are getting the below error. Could you please help us to resolve the issue.
BPXF274I FILE SYSTEM DFH540.ZFS 867
FAILED TO MOUNT.
RETURN CODE = 00000072, REASON CODE = EF186058
------------------------------
Bujjireddy Regalla
------------------------------