AIX

AIX

Connect with fellow AIX users and experts to gain knowledge, share insights, and solve problems.


#Power
 View Only
  • 1.  Upgrading AIX ML Levels

    Posted Thu July 30, 2009 06:40 AM

    Originally posted by: bomahony


    I recently updated a server to 5300 ML7 so that i could install WebSphere 7. I did this before installing ML7 SP1. However i seem to be running into some issues:

    bash-3.00# oslevel
    5.3.0.0
    bash-3.00# oslevel -r
    5300-04
    bash-3.00# oslevel -g
    Fileset Actual Level
    Maintenance Level

    bos.rte 5.3.7.0 5.3.0.0
    bash-3.00# oslevel -s
    5300-04-CSP-0000
    bash-3.00# oslevel -qs
    Known Service Packs

    5300-07-01-0748
    5300-06-03-0732
    5300-06-02-0727
    5300-06-01-0722
    5300-05-CSP-0000
    5300-05-06-0000
    5300-05-05-0000
    5300-05-04-0000
    5300-05-03-0000
    5300-05-02-0000
    5300-05-01-0000
    5300-04-CSP-0000
    5300-04-03-0000
    5300-04-02-0000
    5300-04-01-0000
    5300-04-00-0000
    5300-03-CSP-0000

    bash-3.00# oslevel -s -l 5300-07-01-0748
    bash-3.00#
    bash-3.00# oslevel -s -l 5300-06-01-0722
    bash-3.00# oslevel -s -l 5300-04-CSP-0000

    So it isnt listing any filesets as being old.

    How do i get the machine to recognise it is running 5.3 ML7.
    When i try to update to SP1 it says:

    #---------------------------------------------------------------------
    1. No filesets on the media could be used to update the currently
    2. installed software.
    #
    1. Either the software is already at the same level as on the media, or
    2. the media contains only filesets which are not currently installed.
    #---------------------------------------------------------------------

    When i try to install SP1 it says:

    File:
    S:X11.fnt.fontServer 5.3.7.1
    -----------------------------------------------------------------------------
    Pre-installation Verification...
    -----------------------------------------------------------------------------
    Verifying selections...done
    Verifying requisites...done
    Results...

    FAILURES

    Filesets listed in this section failed pre-installation verification
    and will not be installed.

    Requisite Failures

    SELECTED FILESETS: The following is a list of filesets that you asked to
    install. They cannot be installed until all of their requisite filesets
    are also installed. See subsequent lists for details of requisites.

    X11.fnt.fontServer 5.3.7.1 # AIXwindows Font Server

    MISSING REQUISITES: The following filesets are required by one or more
    of the selected filesets listed above. They are not currently installed
    and could not be found on the installation media.

    X11.fnt.fontServer 5.3.0.0 # Base Level Fileset

    << End of Failure Section >>
    #AIX-Forum


  • 2.  Re: Upgrading AIX ML Levels

    Posted Thu July 30, 2009 06:49 AM

    Originally posted by: SystemAdmin


    Run this command and post the output:

    instfix -ic | grep ":-:"

    The TL 7 doesn't look applied correctly and this command will help indicate which filesets are down level.
    Thanks,

    Sam
    #AIX-Forum


  • 3.  Re: Upgrading AIX ML Levels

    Posted Thu July 30, 2009 07:45 AM

    Originally posted by: bomahony


    {code}
    bash-3.00# instfix -ic | grep ":-:"
    5300-01_AIX_ML:Java14.debug:1.4.1.6:1.4.0.1:-:AIX 5300-01 Update
    5300-05_AIX_ML:csm.essl:1.5.1.0:1.5.0.0:-:AIX 5300-05 Update
    5300-05_AIX_ML:csm.gpfs:1.5.1.0:1.5.0.0:-:AIX 5300-05 Update
    5300-05_AIX_ML:csm.ll:1.5.1.0:1.5.0.0:-:AIX 5300-05 Update
    5300-05_AIX_ML:csm.pe:1.5.1.0:1.5.0.0:-:AIX 5300-05 Update
    5300-05_AIX_ML:csm.pessl:1.5.1.0:1.5.0.0:-:AIX 5300-05 Update
    5300-06_AIX_ML:csm.essl:1.6.0.10:1.5.0.0:-:AIX 5300-06 Update
    5300-06_AIX_ML:csm.gpfs:1.6.0.10:1.5.0.0:-:AIX 5300-06 Update
    5300-06_AIX_ML:csm.ll:1.6.0.10:1.5.0.0:-:AIX 5300-06 Update
    5300-06_AIX_ML:csm.pe:1.6.0.10:1.5.0.0:-:AIX 5300-06 Update
    5300-06_AIX_ML:csm.pessl:1.6.0.10:1.5.0.0:-:AIX 5300-06 Update
    5300-07_AIX_ML:csm.essl:1.7.0.0:1.5.0.0:-:AIX 5300-07 Update
    5300-07_AIX_ML:csm.gpfs:1.7.0.0:1.5.0.0:-:AIX 5300-07 Update
    5300-07_AIX_ML:csm.ll:1.7.0.0:1.5.0.0:-:AIX 5300-07 Update
    5300-07_AIX_ML:csm.pe:1.7.0.0:1.5.0.0:-:AIX 5300-07 Update
    5300-07_AIX_ML:csm.pessl:1.7.0.0:1.5.0.0:-:AIX 5300-07 Update

    I usually work on Solaris, and only have limited experience of MLs on AIX, so am slightly unsure where to go with this.
    #AIX-Forum


  • 4.  Re: Upgrading AIX ML Levels

    Posted Thu July 30, 2009 09:13 AM

    Originally posted by: SystemAdmin


    There is the problem. The "-" indicates the fileset is missing with the last field saying which TL/ML/SP requires that level. Because those csm filesets are at a lower level that is what is holding hte TL back. CSM can be removed if you don't use it....more information on it is here:

    http://www-03.ibm.com/systems/clusters/software/csm/index.html

    If you want to update the packages though the updates are here:

    http://www14.software.ibm.com/webapp/set2/sas/f/csm/download/home.html

    Make sure you move to 1.7.0.0 at a minimum to resolve the problem.

    Cheers,
    Sam
    #AIX-Forum


  • 5.  Re: Upgrading AIX ML Levels

    Posted Thu July 30, 2009 10:11 AM

    Originally posted by: bomahony


    Sam thanks for all your help.

    These boxes are used for development, and as such are not set up in clusters. Is it easy to remove CSM?

    Im reading the documentation you sent atm.
    #AIX-Forum


  • 6.  Re: Upgrading AIX ML Levels

    Posted Thu July 30, 2009 10:18 AM

    Originally posted by: bomahony


    uninstalled the csm components via smit, and it is now showing:

    bash-3.00# oslevel -s
    5300-07-01-0748

    Thanks a lot!
    #AIX-Forum