------------------------------
Thomas Jung
------------------------------

Hello Thomas,

that's correct.

It is documented in IBM Documentation article "Planning high availability":

------------------------------
Best regards, 

Christian Schroeder
IBM Storage Virtualize Support with Passion
------------------------------

Original Message:
Sent: Mon October 28, 2024 01:39 PM
From: Thomas Jung
Subject: PBHA FC backend + iscsi ethernet hosts

Hello Community,

we configured PBHA today. Is it correct that iSCSI Ethernet hosts are not supported?

 

Our two 5045 flashstore systems are connected with 16GB FC. The vmware esxi hosts are connected with 10GB Ethernet.

 

Thank you

------------------------------
Thomas Jung
------------------------------

Storage Virtualize Version 9.1.0 does provide support for iSCSI Hosts in a PHBA partition.

• Only the SCSI hosts connected through Fibre Channel or iSCSI can be configured in a storage partition that is configured for high availability.

https://www.ibm.com/docs/en/sanvolumecontroller/9.1.0?topic=availability-planning-high

------------------------------
Uwe Schreiber
System Engineer / Solution Architect
SVA System Vertrieb Alexander
Wiesbaden
------------------------------

Original Message:
Sent: Mon October 28, 2024 01:39 PM
From: Thomas Jung
Subject: PBHA FC backend + iscsi ethernet hosts

Hello Community,

we configured PBHA today. Is it correct that iSCSI Ethernet hosts are not supported?

 

Our two 5045 flashstore systems are connected with 16GB FC. The vmware esxi hosts are connected with 10GB Ethernet.

 

Thank you

------------------------------
Thomas Jung
------------------------------