Originally posted by: Gautam

hi all,
am finding trouble in linking d partner profiles to the mappings i hav created and hence the flow service in Integration Flow Designer.Hence, when i tried the inbound of a X12-3060ver document,the mapping and the flow was successfull.But the incoming document is not getting validated with regards to the partner interchange IDs.Could anyone please help me with relating the partner database with control files of message manager?i tried with the update subsystem in IFD.But its not working and the mapping gets failed while i try to execute the event server.
#IBMSterlingTransformationExtender
#DataExchange
#IBM-Websphere-Transformation-Extender

Originally posted by: jvanboga

What version of partner mgr are you using? Did you build your trade links? Have you imported the 3060 type trees and redeployed msg mgr?
#DataExchange
#IBMSterlingTransformationExtender
#IBM-Websphere-Transformation-Extender

Originally posted by: SystemAdmin

And ^ use the "EDI wizard in partner manager", unless that's what you meant by "importing".
#IBM-Websphere-Transformation-Extender
#DataExchange
#IBMSterlingTransformationExtender

Originally posted by: Gautam

hi,
am using Trading Manager 7.7;lemme share all d steps with you.please help me with wat am missing out.I started with configuring all d databases.n then created trade links in partner manager n then using EDI wizard i created d standard type trees. Using d X12user.mtt, i created my application mapping in which i mapped some of d attributes 4m d incoming EDI data file 2 another internal document file (basically a flat file).i deployed d message manager n run map components of message manager.
the problem am facing now s d sortX12 subsystem of StampAndSort s giving an error log in d reject folder of message manager.I hav attached d error log along...

thanks.
#DataExchange
#IBMSterlingTransformationExtender
#IBM-Websphere-Transformation-Extender

Originally posted by: jvanboga

OK, could be a number of problems. First check the following items if you do not detect issues then try deleting your x12user.mtt file then rebuild it with the edi wiz selecting each version edi/x12 an related transaction you require. After which you'll redeploy msg_mgr.msl

My initial take on the reject file is that there are substantial issues with your x12 file. Create a validation map and run your file against the map. Review the trace (.mtr) file for the typical words like "invalid" or "unknown data".

Check segment counts per ST-SE, loop counts per ISA-IEA and GS-GE.

Make sure you've defined your TP relationship to accept the delimiters and terminators used in the file.

Technically you shouldn't use a 3 byte termiantor so if your's is mre than one byte try changing it to one for your msg_mgr test.

Change your qualifiers to upper case and see what happens.

jvanboga

PS: I'm out of town so may not respond quickly.
#IBMSterlingTransformationExtender
#DataExchange
#IBM-Websphere-Transformation-Extender

Originally posted by: SystemAdmin

"Make sure you've defined your TP relationship to accept the delimiters and terminators used in the file."

I don't think that matters. The only time I've noticed that message/trading manager uses the defined record delimitor/terminators set up for a trading partners, is when building output files. I believe that as long as the input files's info is in the standard, it does not have to match what's set up under : address book/external trading partners/company/ISA options/separators.
#IBMSterlingTransformationExtender
#DataExchange
#IBM-Websphere-Transformation-Extender

Originally posted by: jvanboga

Rep, you are correct. For the most part I've never had a problem with the default delimiter either. However, I've found that when you are trying to debug an issue like this you're better off eliminating any potential issue and selecting the delimiter doesn't hurt. Also, you need to make sure the delimiter combination is defined in the type tree. If it isn't it probably won't be a selectable option. If it is an odd delimiter combination (and I've seen them) you can update the type tree and it redeploy msg_mgr and add it to Partner Manager.
#DataExchange
#IBMSterlingTransformationExtender
#IBM-Websphere-Transformation-Extender

Originally posted by: SystemAdmin

Other then that, the error message points to a problem in the ISA/IEA segments.

Yeah, like jvanboga mentions, make the "zz" qualifier upper case, "ZZ".

"zz" is not in the restriction list. That will cause an error.

Message was edited by: rep
#IBMSterlingTransformationExtender
#DataExchange
#IBM-Websphere-Transformation-Extender

Originally posted by: jvanboga

I recommend you still run the validation map to make sure the lowercase qualifiers are not the only issue. And, chances are that if you used lowercase qualifiers in the ISA they are elsewhere.
#IBM-Websphere-Transformation-Extender
#IBMSterlingTransformationExtender
#DataExchange

Originally posted by: Gautam

hi,
thanks jvanboga n rep for ur valuable tips.d prob was with d qualifier which had 2 b upper case.Now am able 2 validate d incoming EDI document n perform a complete inbound process.thanks buddies once again.am learning this software only now n in case i hav any furthur queries wud like 2 approach u........
#IBM-Websphere-Transformation-Extender
#DataExchange
#IBMSterlingTransformationExtender

Originally posted by: Gautam

hi,
i hav a doubt reg post offices.i hav configured my get post office 2 d default mail directory.n wen i start d event server n run d system using message management console, d input file disappears 4m d mail directory--- means it must get validated n routed 2 my Put post office directory in case of an inbound process. but i dont seem 2 get d file in d put post office directory........ can u help me with d possible reasons?
n another thing s tht while running d event server wat r d essential msl files that must be present in d event server directory? must d compilation map (*.mmc of an user application map) be present in d server directory?
#IBM-Websphere-Transformation-Extender
#DataExchange
#IBMSterlingTransformationExtender

Originally posted by: jvanboga

Don't recall what version you are running but depending where you installed TX, from it's route folder, the mmc (compiled) files are typically deployed to the following path 'tx_path\cmgr\mmgr\*.mmc' and the default folder for the msl (system) files is 'tx_path\Systems\*.msl'. You edi/x12 files (default settings) would be dropped in path 'tx_path\cmgr\mmgr\mail\' with a file naming convention of '*mi.edi'.

To get an idea of what processes are running and where files are written to when the file is dropped use the 'event server monitor'. Open the monitor pointing at the machine and port the services in question are running on. Then drop your file in the mail folder. Watch the monitor. When it is finished processing your file take a snapshot. You can then open the 'SnapShot Viewer' to examine the data flow.

If you aren't familiar with snapshot viewer, once you have the snapshot file open, right click on the last msg_mgr process that ran. It will summarize what happened in the map.

If you didn't use the proper file naming standard, chances are that your file was picked up and archived but not much more.
#IBM-Websphere-Transformation-Extender
#IBMSterlingTransformationExtender
#DataExchange

Originally posted by: Gautam

hi,
first of all i wud like to wish everyone a very happy new year.Sorry for using d forum as a platform....lemme come 2 my query now........

d prob am facing s, during d inbound process,after running d event server with d input file in place in its default directory, d desired output (flatfile) of d mapping s not getting created.am getting an error log which i hav attached along.n also wen i tried to create d map audit,i found something wierd in it as it was not able to recognize d input at all......... i hav also attached d audit log with this.... can u please help me with this?
#IBM-Websphere-Transformation-Extender
#IBMSterlingTransformationExtender
#DataExchange

Originally posted by: jvanboga

OK, so you are using 8.0 with Cmgr 7.7. Looks like this problem is because you file was still locked when message manager tried picking up the file.

<SourceReport card="1" adapter="File" bytes="0" adapterreturn="-1">
<Message>Source not available</Message>
<Settings>C:\Ascential\DataStageTX_8.0\cmgr_v7.7\mmgr\mail\po850mi.EDI</Settings>

For the shot term you could move the file to the mail folder or change your file event settings and redeploy msg_mgr. Using 'retry' and/or 'mapdelay' to resolve this problem.

Message was edited by: jvanboga
#IBM-Websphere-Transformation-Extender
#DataExchange
#IBMSterlingTransformationExtender

Originally posted by: Gautam

I sincerely thank this forum community in helping me resolve the issue.
#IBM-Websphere-Transformation-Extender
#DataExchange
#IBMSterlingTransformationExtender