IBM QRadar

IBM QRadar

Join this online user group to communicate across Security product users and IBM experts by sharing advice and best practices with peers and staying up to date regarding product enhancements.

 View Only

  • 1.  ISO mount using IMM

    Posted Tue May 07, 2019 03:19 AM
    I followed blow IBM link to rebuild Qradar, but after mapping ISO file I am not able to see image in CD/DVD bootable option. When I tried to mount manually with 'mount /media/cdrom' command got error saying  "/recovery/721/product.iso: no such file or directory"  

    Guide: IBM QRadar: Mounting ISOs Using IMM
    Ibm remove preview
    IBM QRadar: Mounting ISOs Using IMM
    How do you mount an ISO using the IMM?
    View this on Ibm >


    ISO downloaded from: https://www-01.ibm.com/support/docview.wss?uid=swg27050754



    ------------------------------
    Dastagirsab Mulla
    ------------------------------


  • 2.  RE: ISO mount using IMM

    Posted Wed May 08, 2019 11:06 AM
    When you click on "Virtual Media" menu item in Remote Control window, you need to make sure you click on "Activate".  It really doesn't do anything other than puts a check mark against that menu item and enables "Select Device to Mount" menu option.  After clicki9ng on the latter it displays the dialog box as shown in the link you posted here.  You need to click on "Add Image" button and specify the ISO you downloaded.  Then you need to click on "Mount Selected" button after you select the image in the list view control on the left.  Make sure to click on the "Mapped" check box of that image.
    After the above is complete reboot the box and press F12 to select the boot device.  Uncheck everything where you see a check (X).  Move the selection down to "CD/DVD" and press "ENTER".  The boot should start from the mounted media.

    ------------------------------
    Robert Djabarov
    ------------------------------

    Original Message


  • 3.  RE: ISO mount using IMM

    Posted Mon May 13, 2019 03:47 AM
    Hi Robert 
    Thanks for you reply, rebuild was success and also we did the network configuration, but we are not able to login web console with IP address and also ssh is not working from putty though all required services are running properly.

    ------------------------------
    Dastagirsab Mulla
    ------------------------------

    Original Message


  • 4.  RE: ISO mount using IMM

    Posted Mon May 13, 2019 08:31 AM
    You need to make sure that your network configuration is correct (you should be able to reach default gateway and DNS that you specified, as well as default gateway and DNS of the machine that you're trying to SSH from), and see if you have a firewall between your workstation and the console.

    ------------------------------
    Robert Djabarov
    ------------------------------

    Original Message


Related Content