Hello,
We're going to migrate form Axway B2Bi to Datapower with our ebXML traffic.
I know my way around the Axway and how to deal with the CPA's. And (technically) know my way around the Datapower (we already use datapower for webservices mostly MPGW's). But Now I need to start form scratch with B2B stuff in Datapower.

I already did the raid configuration for the B2B document storage. So now I have 2 raid partions (and the B2B documentation storage has plenty of free space available and the raid 'Set to read-only' is off)
But when I try to import a CPA (Configure B2B Gateway) which I already have because of the Axway where we already use them, I get an error.
The error disapears very quickly (blink of an eye) because the DP throws me out and I need to log in again.
The error states something like that I don't have the permissions to write to the file system. Normal filesystem is no problem but I assumed this is the Raid part (what normally is read only according to the documentation). The error only comes on screen (very short) and does not appear in the DP logs. But analyzing the browser behaviour/log it appears the logout is the issue. Because my valid session suddenly throws an error (401 Unauthorized on the call https://<OurDpUrl>/getXML.xml?action=getUserDomainList).

But when I do this call in a valid session I get the result. So it looks like my session is invalided in a way because of the CPA import. 

I don't think it has to do with access because I am admin and my access profile has full access, like this: */*/*?Access=r+w+a+d+x

Anyone know where I need to look/adjust to get an import of a CPA working ?

Thanks in advance.

P.S. Our firmware is
Firmware:IDG.10.5.0.5
Build:351132

Hello,
We're going to migrate form Axway B2Bi to Datapower with our ebXML traffic.
I know my way around the Axway and how to deal with the CPA's. And (technically) know my way around the Datapower (we already use datapower for webservices mostly MPGW's). But Now I need to start form scratch with B2B stuff in Datapower.

I already did the raid configuration for the B2B document storage. So now I have 2 raid partions (and the B2B documentation storage has plenty of free space available and the raid 'Set to read-only' is off)
But when I try to import a CPA (Configure B2B Gateway) which I already have because of the Axway where we already use them, I get an error.
The error disapears very quickly (blink of an eye) because the DP throws me out and I need to log in again.
The error states something like that I don't have the permissions to write to the file system. Normal filesystem is no problem but I assumed this is the Raid part (what normally is read only according to the documentation). The error only comes on screen (very short) and does not appear in the DP logs. But analyzing the browser behaviour/log it appears the logout is the issue. Because my valid session suddenly throws an error (401 Unauthorized on the call https://<OurDpUrl>/getXML.xml?action=getUserDomainList).

But when I do this call in a valid session I get the result. So it looks like my session is invalided in a way because of the CPA import. 

I don't think it has to do with access because I am admin and my access profile has full access, like this: */*/*?Access=r+w+a+d+x

Anyone know where I need to look/adjust to get an import of a CPA working ?

Thanks in advance.

P.S. Our firmware is
Firmware:IDG.10.5.0.5
Build:351132

Hello,
We're going to migrate form Axway B2Bi to Datapower with our ebXML traffic.
I know my way around the Axway and how to deal with the CPA's. And (technically) know my way around the Datapower (we already use datapower for webservices mostly MPGW's). But Now I need to start form scratch with B2B stuff in Datapower.

I already did the raid configuration for the B2B document storage. So now I have 2 raid partions (and the B2B documentation storage has plenty of free space available and the raid 'Set to read-only' is off)
But when I try to import a CPA (Configure B2B Gateway) which I already have because of the Axway where we already use them, I get an error.
The error disapears very quickly (blink of an eye) because the DP throws me out and I need to log in again.
The error states something like that I don't have the permissions to write to the file system. Normal filesystem is no problem but I assumed this is the Raid part (what normally is read only according to the documentation). The error only comes on screen (very short) and does not appear in the DP logs. But analyzing the browser behaviour/log it appears the logout is the issue. Because my valid session suddenly throws an error (401 Unauthorized on the call https://<OurDpUrl>/getXML.xml?action=getUserDomainList).

But when I do this call in a valid session I get the result. So it looks like my session is invalided in a way because of the CPA import. 

I don't think it has to do with access because I am admin and my access profile has full access, like this: */*/*?Access=r+w+a+d+x

Anyone know where I need to look/adjust to get an import of a CPA working ?

Thanks in advance.

P.S. Our firmware is
Firmware:IDG.10.5.0.5
Build:351132

Hello,
We're going to migrate form Axway B2Bi to Datapower with our ebXML traffic.
I know my way around the Axway and how to deal with the CPA's. And (technically) know my way around the Datapower (we already use datapower for webservices mostly MPGW's). But Now I need to start form scratch with B2B stuff in Datapower.

I already did the raid configuration for the B2B document storage. So now I have 2 raid partions (and the B2B documentation storage has plenty of free space available and the raid 'Set to read-only' is off)
But when I try to import a CPA (Configure B2B Gateway) which I already have because of the Axway where we already use them, I get an error.
The error disapears very quickly (blink of an eye) because the DP throws me out and I need to log in again.
The error states something like that I don't have the permissions to write to the file system. Normal filesystem is no problem but I assumed this is the Raid part (what normally is read only according to the documentation). The error only comes on screen (very short) and does not appear in the DP logs. But analyzing the browser behaviour/log it appears the logout is the issue. Because my valid session suddenly throws an error (401 Unauthorized on the call https://<OurDpUrl>/getXML.xml?action=getUserDomainList).

But when I do this call in a valid session I get the result. So it looks like my session is invalided in a way because of the CPA import. 

I don't think it has to do with access because I am admin and my access profile has full access, like this: */*/*?Access=r+w+a+d+x

Anyone know where I need to look/adjust to get an import of a CPA working ?

Thanks in advance.

P.S. Our firmware is
Firmware:IDG.10.5.0.5
Build:351132

Hello,
We're going to migrate form Axway B2Bi to Datapower with our ebXML traffic.
I know my way around the Axway and how to deal with the CPA's. And (technically) know my way around the Datapower (we already use datapower for webservices mostly MPGW's). But Now I need to start form scratch with B2B stuff in Datapower.

I already did the raid configuration for the B2B document storage. So now I have 2 raid partions (and the B2B documentation storage has plenty of free space available and the raid 'Set to read-only' is off)
But when I try to import a CPA (Configure B2B Gateway) which I already have because of the Axway where we already use them, I get an error.
The error disapears very quickly (blink of an eye) because the DP throws me out and I need to log in again.
The error states something like that I don't have the permissions to write to the file system. Normal filesystem is no problem but I assumed this is the Raid part (what normally is read only according to the documentation). The error only comes on screen (very short) and does not appear in the DP logs. But analyzing the browser behaviour/log it appears the logout is the issue. Because my valid session suddenly throws an error (401 Unauthorized on the call https://<OurDpUrl>/getXML.xml?action=getUserDomainList).

But when I do this call in a valid session I get the result. So it looks like my session is invalided in a way because of the CPA import. 

I don't think it has to do with access because I am admin and my access profile has full access, like this: */*/*?Access=r+w+a+d+x

Anyone know where I need to look/adjust to get an import of a CPA working ?

Thanks in advance.

P.S. Our firmware is
Firmware:IDG.10.5.0.5
Build:351132

Hello,
We're going to migrate form Axway B2Bi to Datapower with our ebXML traffic.
I know my way around the Axway and how to deal with the CPA's. And (technically) know my way around the Datapower (we already use datapower for webservices mostly MPGW's). But Now I need to start form scratch with B2B stuff in Datapower.

I already did the raid configuration for the B2B document storage. So now I have 2 raid partions (and the B2B documentation storage has plenty of free space available and the raid 'Set to read-only' is off)
But when I try to import a CPA (Configure B2B Gateway) which I already have because of the Axway where we already use them, I get an error.
The error disapears very quickly (blink of an eye) because the DP throws me out and I need to log in again.
The error states something like that I don't have the permissions to write to the file system. Normal filesystem is no problem but I assumed this is the Raid part (what normally is read only according to the documentation). The error only comes on screen (very short) and does not appear in the DP logs. But analyzing the browser behaviour/log it appears the logout is the issue. Because my valid session suddenly throws an error (401 Unauthorized on the call https://<OurDpUrl>/getXML.xml?action=getUserDomainList).

But when I do this call in a valid session I get the result. So it looks like my session is invalided in a way because of the CPA import. 

I don't think it has to do with access because I am admin and my access profile has full access, like this: */*/*?Access=r+w+a+d+x

Anyone know where I need to look/adjust to get an import of a CPA working ?

Thanks in advance.

P.S. Our firmware is
Firmware:IDG.10.5.0.5
Build:351132

Hello,
We're going to migrate form Axway B2Bi to Datapower with our ebXML traffic.
I know my way around the Axway and how to deal with the CPA's. And (technically) know my way around the Datapower (we already use datapower for webservices mostly MPGW's). But Now I need to start form scratch with B2B stuff in Datapower.

I already did the raid configuration for the B2B document storage. So now I have 2 raid partions (and the B2B documentation storage has plenty of free space available and the raid 'Set to read-only' is off)
But when I try to import a CPA (Configure B2B Gateway) which I already have because of the Axway where we already use them, I get an error.
The error disapears very quickly (blink of an eye) because the DP throws me out and I need to log in again.
The error states something like that I don't have the permissions to write to the file system. Normal filesystem is no problem but I assumed this is the Raid part (what normally is read only according to the documentation). The error only comes on screen (very short) and does not appear in the DP logs. But analyzing the browser behaviour/log it appears the logout is the issue. Because my valid session suddenly throws an error (401 Unauthorized on the call https://<OurDpUrl>/getXML.xml?action=getUserDomainList).

But when I do this call in a valid session I get the result. So it looks like my session is invalided in a way because of the CPA import. 

I don't think it has to do with access because I am admin and my access profile has full access, like this: */*/*?Access=r+w+a+d+x

Anyone know where I need to look/adjust to get an import of a CPA working ?

Thanks in advance.

P.S. Our firmware is
Firmware:IDG.10.5.0.5
Build:351132