Global Storage

Global Storage Forum

Connect, collaborate, and stay informed with insights from across Storage

 View Only

  • 1.  format storage 5015

    Posted Fri December 20, 2024 01:41 PM

    I need to reset a storage 5015 to factory mode, how could I do it?



    ------------------------------
    Miguel Peralta
    ------------------------------


  • 2.  RE: format storage 5015

    Posted Mon December 23, 2024 03:51 AM

    Hi Miguel,

    Procedure:

    1. Start the service assistant on one of the node canisters.
    2. Use the service assistant node action to hold the node in service state.
    3. Use the Manage System option to remove the system data from the node.
    4. Repeat steps 1 through 3 on the second node canister in the enclosure.
    5. On one node, open the service assistant Configure Enclosure and select the Reset System ID option.
      This action causes the system to reset.

    https://www.ibm.com/docs/en/flashsystem-5x00/8.2.1?topic=problem-procedure-deleting-system-completely



    ------------------------------
    Nezih Boyacioglu
    ------------------------------

    Original Message


Related Content