Originally posted by: mbehring
Hi list,
I am getting the following error during AIX 5.3 new installation on a P550 machine:
Finished processing all filesets.
System Installation Time: 2 hrs 24 mins Tasks Complete: 93%
Method error (/usr/lib/methods/cfgefscsi -2 -l fscsi0 ):
0514-061 Cannot find a child device.
FAILURES
Filesets listed in this section failed pre-installation verification
and will not be installed.
Missing Filesets
The following filesets could not be found on the installation media.
If you feel these filesets really are on the media, check for typographical
errors in the name specified or, if installing from directory, check for
discrepancies between the Table of Contents file (.toc) and the images that
reside in the directory.
devices.pci.86807910
devices.pci.86808a11
devices.pci.ethernet
devices.pci.pciclass.020000
<< End of Failure Section >>
Method error (/usr/lib/methods/cfgefscsi -2 -l fscsi0 ):
0514-061 Cannot find a child device.
The installation stops at 93% with the error above....looks like it has to do with HBA interfaces....after that, when booting to AIX (and not the CD) the screen below appears:
Welcome to AIX.
boot image timestamp: 15:13 01/30
The current time and date: 19:42:18 01/30/2010
number of processors: 8 size of memory: 32000MB
boot device: /pci@800000020000003/pci@2/pci1069,b166@1/scsi@0/sd@5,0
kernel size: 13421062; 64 bit kernel
0514-440 cfgcon: failed to create log file: check path name, permissions, and av
ailable space
DIAGNOSTIC OPERATING INSTRUCTIONS
LICENSED MATERIAL and LICENSED INTERNAL CODE - PROPERTY OF IBM.
(C) COPYRIGHTS BY IBM AND BY OTHERS 1982,1991-1995.
ALL RIGHTS RESERVED.
These programs allow you to enter diagnostics, service aids, single
user mode, or low-level maintenance mode. The diagnostics should be
used whenever problems with the system occur which have not been
corrected by any software application procedures available.
In general, the diagnostics will run automatically. However, sometimes
you will be required to select options, inform the system when to
continue, do simple tasks, and exchange diskettes.
Several keys are used to control the diagnostics:
-
The Enter key continues the procedure or performs an action.
-
The Backspace key allows keying errors to be corrected.
-
The cursor keys are used to select an option.
To continue, press Enter.
What do I have to do to finish the installation and configure Network so I can telnet to the machine normally? Could be that the CD media have any problem?
Any help is appreciated.
Mario
#AIX-Forum