IBM webMethods Hybrid Integration

IBM webMethods Hybrid Integration

Join this online group to communicate across IBM product users and experts by sharing advice and best practices with peers and staying up to date regarding product enhancements.

 View Only
Back to discussions
Expand all | Collapse all

Creating a Process Debug Configuration issue:

  • 1.  Creating a Process Debug Configuration issue:

    Posted Wed July 05, 2017 10:31 AM

    Hello Experts,

    while configuring debug mode for Business process management getting "No input documents available.Make sure integration server connected or not ".
    But integration server is connected and I’m able to see my package navigator
    Can you please guide on this issue.
    Thanks in advance.

    Thanks.
    Ram.

    Screenshot (141).pnghttps://higherlogicdownload.s3.amazonaws.com/IMWUC/webMethods/Files3/9e38a40ae5252e24ff51fb8cfc3aa290c174aa51_2_1035x580.png 1.5x, https://higherlogicdownload.s3.amazonaws.com/IMWUC/webMethods/Files/9e38a40ae5252e24ff51fb8cfc3aa290c174aa51.png 2x" data-dominant-color="D3D6D8">
    Screenshot (141).png1366×768 181 KB


    #webMethods-BPMS
    #webMethods
    #BPM


  • 2.  RE: Creating a Process Debug Configuration issue:

    Posted Fri July 07, 2017 04:27 PM

    Hi Ram,

    Were you able to resolve this?

    If not, then I can suggest that your process does not have any Start steps defined.

    I believe we can do a better job with our messages, but the intention of the message shown in your screenshot is twofold: 1) to state that your process needs at least one input document, i.e. a Start step, and 2) the possible reason for there not being any input document is that your Integration Server is not connected.

    Since you state that your Integration Server is connected, then I suspect your process does not have any Start steps.

    I hope that helps.


    #webMethods
    #webMethods-BPMS
    #BPM


Related Content