AIX

AIX

Connect with fellow AIX users and experts to gain knowledge, share insights, and solve problems.


#Power
#Power
 View Only
Back to discussions
Expand all | Collapse all

AIX 5.3 and host-resources-mib in SNMP

  • 1.  AIX 5.3 and host-resources-mib in SNMP

    Posted Tue November 20, 2012 10:23 PM

    Originally posted by: SystemAdmin


    I am unable to get any information from the HOST-RESOURCES-MIB using SNMP on an AIX 5.3 server at a client site. All that happens is that the command promtp is returned immediately. The config in the /etc/snmpdv3.conf is:

    1. groupName securityModel securityName storageType
    VACM_GROUP group1 SNMPv1 public -
    VACM_GROUP group2 SNMPv1 WWWWWWWWWWW -
    VACM_GROUP group3 SNMPv1 SSSSSSSSSS -
    VACM_GROUP group4 SNMPv2c rrrrrrrrr -

    1. viewName viewSubtree viewMask viewType storageType
    VACM_VIEW defaultView 1.3.6.1.6.3.1.1.4 - included -
    VACM_VIEW defaultView 1.3.6.1.6.3.1.1.5 - included -
    VACM_VIEW defaultView snmpModules - excluded -
    VACM_VIEW defaultView 1.3.6.1.4.1.2.6.191 - excluded -

    1. viewName viewSubtree viewMask viewType storageType
    VACM_VIEW redrockView interfaces - included -
    VACM_VIEW redrockView internet - included -
    VACM_VIEW redrockView sysObjectID - included -
    VACM_VIEW redrockView system - included -
    VACM_VIEW redrockView tcp - included -
    VACM_VIEW redrockView icmp - included -
    VACM_VIEW redrockView snmp - included -
    VACM_VIEW redrockView snmpModules - included -
    VACM_VIEW redrockView 1.3.6.1.4.1.2.6.191 - included -
    VACM_VIEW redrockView 1.3.6.1.6.3.1.1.4 - included -
    VACM_VIEW redrockView 1.3.6.1.6.3.1.1.5 - included -
    VACM_VIEW redrockView host - included -
    VACM_VIEW redrockView directory - included -
    VACM_VIEW redrockView mib-2 - included -

    1. groupName contextPrefix contextMatch securityLevel securityModel readView writeView notifyView storageType
    VACM_ACCESS group1 - - noAuthNoPriv SNMPv1 defaultView - defaultView -
    VACM_ACCESS group2 - - noAuthNoPriv SNMPv1 defaultView - defaultView -
    VACM_ACCESS group3 - - noAuthNoPriv SNMPv1 defaultView - defaultView -
    VACM_ACCESS group4 - - noAuthNoPriv SNMPv2c redrockView - redrockView -

    1. communityName securityName securityLevel netAddr netMask storageType
    COMMUNITY public public noAuthNoPriv 0.0.0.0 0.0.0.0 -
    COMMUNITY WWWWWWWWWW WWWWWWWWWW noAuthNoPriv 134.211.250.83 255.255.255.0 -
    COMMUNITY SSSSSSSSS SSSSSSSSS noAuthNoPriv 134.211.250.83 255.255.255.0 -
    #COMMUNITY rrrrrrrrr rrrrrrrrr noAuthNoPriv 134.211.139.84 255.255.255.0 -
    COMMUNITY rrrrrrrrr rrrrrrrrr noAuthNoPriv 127.0.0.1 255.255.255.255 -
    COMMUNITY rrrrrrrrr rrrrrrrrr noAuthNoPriv 0.0.0.0 0.0.0.0 -

    The information in HOST-RESOURCES-MIB is required so that we can monitor this server for the client remotely. At present I am just testing locally on the server, hence the loopback address for my community.
    #AIX-Forum


Related Content