Netezza Performance Server

Hi all,
    We need Power off Netezza N2000 Series, please help provide information for power Off and Power On  Netezza N2000 series.

Power down instructions for N2000 series is available here -> https://www.ibm.com/docs/en/psfa/7.2.1?topic=procedures-powering-puredata-system-analytics-n200x

Howdy
Correct link is: https://www.ibm.com/docs/en/psfa/7.2.1?topic=procedures-powering-off-puredata-system-analytics-n200x-system
Before you decomission Netezza appliance make sure data has been securely erased. If it hasn't been done already - contact us @ https://smart-associates.biz/company/contact.php
N2001 doesn't have SED capbility so simple "drop data" (databases, users, groups and all rest of ACL) would not work and data can be recovered (can be done). 
If you already succesfully erased all data you need to shutdown SPA's (blades and disks). 
Best to keep hosts online (those doesn't drain much power as mostly are idle ~ 100W ) untill moving out from DC to proove for customer that all is erased. 
 

https://www.ibm.com/docs/en/psfa/7.2.1?topic=procedures-powering-off-puredata-system-analytics-n200x-system

HI Apidesh
here is the link you were looking for
https://www.ibm.com/docs/en/psfa/7.2.1?topic=procedures-powering-off-puredata-system-analytics-n200x-system

https://www.ibm.com/docs/en/psfa/7.2.1?topic=procedures-powering-off-puredata-system-analytics-n200x-system

Hello Sir,
    Ok, Today I test Power On/Off Netezza all component. But  Node1 boot log time(hang Red Hat 6.10  Logo GUI), cannot boot to login. Node2 boot is very fast 5m. I am not sure Node1 hag process for boot device? You have solution for this issue? Thank you very much.

Ok - so you might have HA1 malfunctioning.... First of all: make sure hosts rescue wheels are available (IMMs)
If you don't have access to IMM: ask somebody in DC to configure it for you. https://www.ibm.com/docs/pt-br/i/7.1?topic=ssw_ibm_i_71/rzahq/configimm.html
Skip DNS, NTP, LDAP etc... IP, netmask and gateway are sufficient. Make sure no firewall is blocking your traffic to IMM and also preferably use Windows with IE (or EDGE in IE mode): you can have old FW on host . 
Once you have IMM working: go to remote console and check what is actual error (press ESC on RHEL boot logo).