List of Contributions

Jochen Meixner

CONET Services GmbH

Contact Details

CONET Services GmbH

My Content

1 to 20 of 50+ total

RE: Stretch Cluster backup missed always at one site

Posted By Jochen Meixner Tue May 26, 2020 04:45 AM
Found In Egroup: Data Protection Software \ view thread
Hi Prem, ok, interesting scenario. I would solve this with a command schedule on each TSM Server. Test the existence of the cluster drive (I assume it is a drive). And when it is present, then execute the backup. This is a example code, I did not test it to the end. But it should give you an idea.... ...

RE: Stretch Cluster backup missed always at one site

Posted By Jochen Meixner Mon May 25, 2020 10:38 AM
Found In Egroup: Data Protection Software \ view thread
Hi Prem, you have to configure the TSM client instance to come up with the cluster resource. So the backup will be executed on the active node only. Put the TSM config files on the cluster resource and configure the corresponding TSM services to start up with the cluster resource. It's quite a ...

RE: TSM Server Detected System Error

Posted By Jochen Meixner Wed March 18, 2020 05:39 AM
Found In Egroup: Data Protection Software \ view thread
Hi Prem, this looks like a corruption of indices in DB2. Without the db2diag is it hard to tell which problem it is. DB2 problem IT05944 is about a smilar problem. I could not reach the linked IBM site, the following site shows the problem desciption: https://www.cursor-distribution.de/en/compon ...

RE: web session error to connect brocade switch - "...CANNOT LOAD RBACMatrix..."

Posted By Jochen Meixner Tue March 10, 2020 05:14 AM
Found In Egroup: Primary Storage \ view thread
Hello Aghasi, there seems the user database to be damaged/corrupted/lost. The following article describes a similar problem: https://support.hpe.com/hpesc/public/docDisplay?docLocale=en_US&docId=kc0132971en_us I hope this helps to solve your problem. Best reards, Jochen ------------------------------ ...

RE: Space are not reclaiming of TDP Oracle nodes

Posted By Jochen Meixner Mon March 02, 2020 09:19 AM
Found In Egroup: Primary Storage \ view thread
Hi Prem, not TSM does the expiration of these oracle backups, Oracle has to expire them. With the suggested command in the backup script the objects which are older than 30 days will be expired. Best regards, Jochen ------------------------------ Jochen Meixner Principal Consultant Storage ...

RE: Backups are failing

Posted By Jochen Meixner Sat December 28, 2019 04:21 AM
Found In Egroup: Data Protection Software \ view thread
Hi Prem, then please give some more information to us: - dsmerror.log +/- 2 Minutes from the error - corresponding actlog - q node f=d of the affected node Best regards, Jochen ------------------------------ Jochen Meixner Principal Consultant Storage & Backup Solutions CONET Services ...

RE: Backups are failing

Posted By Jochen Meixner Fri December 27, 2019 09:16 AM
Found In Egroup: Data Protection Software \ view thread
Hi Prem, then your problem is probable this one: Version 8.1.2 and higher use other session security features than the versions lower than 8.1.2. Please see https://adsm.org/forum/index.php?threads/dsmadmc-ans1357s-session-rejected-downlevel-client-code-version.32113/ Best regards, Jochen ...

RE: Backups are failing

Posted By Jochen Meixner Fri December 27, 2019 05:38 AM
Found In Egroup: Data Protection Software \ view thread
Hi Prem, ok. In your original post is an excerpt from the dsmerror.log from the client. What are the corresponding messages in the server actlog? Which Spectrum Protect Version is the server on? Do you have any servers or clients with a version 8.1.2 or higher? Best regards, Jochen ------- ...

RE: Backups are failing

Posted By Jochen Meixner Thu December 26, 2019 09:30 AM
Found In Egroup: Data Protection Software \ view thread
Hi Prem, additional to the post from @Yann MEUNIER, has the node name been used for another system recently? Especially if it was a Linux/UNIX system originally and after that used for a Windows oder Mac System... Then there could be problems with the Unicode handling. Please see the following document ...

RE: how to get specific months or day backup status on SPP

Posted By Jochen Meixner Fri December 20, 2019 10:34 AM
Found In Library: Data Protection Software

RE: how to get specific months or day backup status on SPP

Posted By Jochen Meixner Fri December 20, 2019 10:34 AM
Found In Egroup: Data Protection Software \ view thread
Hi Prem, ok, I see your problem.... I don't see a solution for this in the moment. You can send a feature request to IBM. Good old actlog in SP with the SQL interface gives you all information you need... But I think I found a workaround. Log in via SSH as root to the SPP appliance and switch ...

RE: how to get specific months or day backup status on SPP

Posted By Jochen Meixner Thu December 19, 2019 06:21 PM
Found In Library: Data Protection Software

RE: how to get specific months or day backup status on SPP

Posted By Jochen Meixner Thu December 19, 2019 06:21 PM
Found In Egroup: Data Protection Software \ view thread
Hi Prem, I am not completely sure what you are looking for... I have a SPP with German language setting and cannot switch it to English right now, so I will try to translate the menus, so the menu entries are probably not exactly named as I translate them... On the main menu on the left side you ...

RE: DS3524 Controller B always LU

Posted By Jochen Meixner Tue December 10, 2019 07:39 PM
Found In Egroup: Primary Storage \ view thread
Hi Mike, ok. I assume you have set the system powerless and restarted it. Found some tips to update the firmware - difficult when the controller is unresponsive. One tip was to try to connect via the out-of-band connection which is the second port on the controller. Did you try this? ------ ...

RE: DS3524 Controller B always LU

Posted By Jochen Meixner Tue December 10, 2019 07:10 PM
Found In Egroup: Primary Storage \ view thread
Found one more link, sounds very similar to your problem. https://www.ibm.com/developerworks/community/forums/html/topic?id=77777777-0000-0000-0000-000014558015 Be careful, the suggested solution erases the configuration of the controller... In one case the controller had to be replaced. -- ...

RE: DS3524 Controller B always LU

Posted By Jochen Meixner Tue December 10, 2019 07:03 PM
Found In Egroup: Primary Storage \ view thread
Hi Mike, mhhhh.... I have not used these machines for many years. Wasn't there an option to reset/reboot the other controller when you have access to the other one? I have found the following. It's not exactly the same, but perhaps it helps to find the the solution... https://www.ibm.com/suppo ...

RE: dsmserv is crashing

Posted By Jochen Meixner Tue December 10, 2019 06:50 PM
Found In Egroup: Primary Storage \ view thread
Hi Prem, the ANR2013E points to a shortage of system memory for the process(es). You say this configuration has run for several years. Have you checked if all the memory in the system is still working? I assume you know how much memory the machine had originally. So please check with one of these ...

RE: dsmserv is crashing

Posted By Jochen Meixner Tue December 10, 2019 11:38 AM
Found In Egroup: Primary Storage \ view thread
Hi Brenda, good point, I did not ask this explicitly. Prem said, the dump at crashtime is filling up the filesystem. And I assumed that he deletes the dump prior to starting the instance. But I did not ask how many space is left after the dump is deleted. So all is pointing to either a insufficient ...

RE: dsmserv is crashing

Posted By Jochen Meixner Mon December 09, 2019 06:39 PM
Found In Egroup: Primary Storage \ view thread
Hi Prem, oK, then perhaps the OS or Machine manufacturer has a similar forum like this? :-) After all you have told us about the problem it seems not to be a TSM problem. If the OS is EOL, too and no updates have been done to it, then I think it's probably a hardware issue... If you tell me what ...

RE: dsmserv is crashing

Posted By Jochen Meixner Mon December 09, 2019 09:31 AM
Found In Egroup: Primary Storage \ view thread
Hi Prem, ok, then I would check the machine with an OS specialist and a hardware specialist first. If the OS and the hardware is not EOL, too... Is it? Best regards, Jochen ------------------------------ Jochen Meixner Principal Consultant Storage & Backup Solutions CONET Services GmbH Duesseldorf, ...