DS8000 Transparent Cloud Tiering

 View Only
  • 1.  What Code Level Should I Be Using for TCT?

    Posted Thu January 19, 2023 09:03 PM
    Edited by Lourie Goodall Fri January 20, 2023 03:35 PM
    Probably one of the most frequent questions I am asked is what microcode level should I be using for DS8000 Transparent Cloud Tiering.  As we all know, code levels will change but I thought it would be good to provide the latest information on this topic. 

    As of today (01/19/2023): 

    TS7700 -  Microcode level 8.53.0.64 for the latest Advanced Object Store (FC5283) updates
    DS8900 - Microcode level R9.3SP2 89.32.37.0 for the latest TCT fixes including support for TS7700 FC5283
    DFSMS -  z/OS V2R4 or V2R5.  Current maintenance information can be found with FIXCAT category IBM.Function.DFSMSCloudStorage and DFSMS/K


    ------------------------------
    Lourie Goodall
    ------------------------------


  • 2.  RE: What Code Level Should I Be Using for TCT?

    Posted Mon January 23, 2023 09:24 AM
    And as Lourie mentions, code levels and recommendations do change over time so thought I'd share a link to the DS8900 code recommendation page which is updated as new DS8900 levels are released or revisions to recommended levels are identified.  Link: https://www.ibm.com/support/pages/node/689333

    ------------------------------
    Rick Lochner
    ------------------------------



  • 3.  RE: What Code Level Should I Be Using for TCT?

    Posted Tue January 24, 2023 10:30 AM
    Following Rick's lead, here the Code Update Recommendation page for
    TS7700: https://www.ibm.com/support/pages/node/6334607
    TSSC: https://www.ibm.com/support/pages/node/6334617

    ------------------------------
    STEFAN LEHMANN
    ------------------------------



  • 4.  RE: What Code Level Should I Be Using for TCT?

    Posted Tue June 13, 2023 10:20 AM
    Lourie, please, what code level is recommended to implement TCT today?
     
    In the table below we do have the recommended level and latest level, I did the recommendation to my customer to install the latest, but Support Team did remember an important point, the code is quite new and do not have a long runtime.
     
    Code levels:

    Thanks in advance.



    ------------------------------
    Denis Augusto Pereira
    ------------------------------



  • 5.  RE: What Code Level Should I Be Using for TCT?

    Posted Tue June 13, 2023 01:37 PM
    Edited by STEFAN LEHMANN Tue June 13, 2023 01:38 PM

    Denis, R5.3 PGA1 (8.53.1.21) is the right recommendation at this time.

    From the Code Update Recommendation page:

    Note: IBM intends to change the currently documented Minimum and Recommended Code Level for TS7760 and TS7770 from R5.1 PGA2 to R5.2 Phase 1 PGA3, and the Recommended Code Level from R5.3 GA to R5.3 PGA1 for TS7770 with 128GB in early 3Q23.


    The number of systems on R5.3 PGA1 vs R5.3 GA is clearly growing nicely and the switch will happen as pre-announced in essentially a couple of weeks.



    ------------------------------
    STEFAN LEHMANN
    ------------------------------