Global Storage

 View Only
  • 1.  FS5220 change the update system from manual upgrade back to automatic upgrade

    Posted 19 days ago
    Edited by Ka Man Poon 19 days ago

    Dear All,

    Could FS5220 update system can change from manual upgrade back to automatic upgrade? Or, how to clear the update status back to before? I open service assist and follow the procedure but show Error 950 upgrade, the management UI shown it online but in service assist UI show Error 950. May I know how long it take?



    ------------------------------
    Ka Man Poon
    ------------------------------



  • 2.  RE: FS5220 change the update system from manual upgrade back to automatic upgrade

    Posted 19 days ago

    Hi
    Connect to the node via ssh and run svcinfo lsupdate comand to see if you have any updates running.



    ------------------------------
    Adalberto Barbosa
    Senior Systems Engineer
    Blue Chip Portugal
    Sintra
    +351214 220 370
    ------------------------------



  • 3.  RE: FS5220 change the update system from manual upgrade back to automatic upgrade

    Posted 17 days ago

    It shown:

    IBM_FlashSystem:Cluster_x.x.x.x:superuser>svcinfo lsupdate

    status system_prepared
    event_sequence_number
    progress
    estimated_completion_time
    suggested_action start
    system_new_code_level 8.7.0.2 (build 177.28.2412040602000)
    system_forced no
    system_next_node_status none
    system_next_node_time
    system_next_node_id
    system_next_node_name
    system_next_pause_time



    ------------------------------
    Ka Man Poon
    ------------------------------



  • 4.  RE: FS5220 change the update system from manual upgrade back to automatic upgrade

    Posted 16 days ago

    Hi,

    applysoftware -abort 

    will abort your upgrade process. 



    ------------------------------
    Nezih Boyacioglu
    ------------------------------



  • 5.  RE: FS5220 change the update system from manual upgrade back to automatic upgrade

    Posted 16 days ago
    Edited by Ka Man Poon 16 days ago
    Hi All,
    Thanks for your help. I uploaded the file from the service assistant again and checked upgrade status on the management GUI system update to 50% and stuck. After that, I put another node offline. The upgrade proceed go to 96%. Put another node exit service state. The system upgraded to 8.7.0.2 now. 


    Hi,

    applysoftware -abort 

    will abort your upgrade process. 



    ------------------------------
    Nezih Boyacioglu
    ------------------------------

    Original Message:
    Sent: Sun February 09, 2025 08:19 PM
    From: Ka Man Poon
    Subject: FS5220 change the update system from manual upgrade back to automatic upgrade

    It shown:

    IBM_FlashSystem:Cluster_x.x.x.x:superuser>svcinfo lsupdate

    status system_prepared
    event_sequence_number
    progress
    estimated_completion_time
    suggested_action start
    system_new_code_level 8.7.0.2 (build 177.28.2412040602000)
    system_forced no
    system_next_node_status none
    system_next_node_time
    system_next_node_id
    system_next_node_name
    system_next_pause_time



    ------------------------------
    Ka Man Poon

    Original Message:
    Sent: Fri February 07, 2025 06:34 AM
    From: Adalberto Barbosa
    Subject: FS5220 change the update system from manual upgrade back to automatic upgrade

    Hi
    Connect to the node via ssh and run svcinfo lsupdate comand to see if you have any updates running.



    ------------------------------
    Adalberto Barbosa
    Senior Systems Engineer
    Blue Chip Portugal
    Sintra
    +351214 220 370

    Original Message:
    Sent: Fri February 07, 2025 03:24 AM
    From: Ka Man Poon
    Subject: FS5220 change the update system from manual upgrade back to automatic upgrade

    Dear All,

    Could FS5220 update system can change from manual upgrade back to automatic upgrade? Or, how to clear the update status back to before? I open service assist and follow the procedure but show Error 950 upgrade, the management UI shown it online but in service assist UI show Error 950. May I know how long it take?



    ------------------------------
    Ka Man Poon
    ------------------------------