HMC

 View Only
Expand all | Collapse all

Update to V9R2M950

  • 1.  Update to V9R2M950

    Posted Tue March 02, 2021 03:43 PM
    Hello,
    tried an update to Version V9R2M950.. First installed MH01858 and then rebooted.
    Then installed HMC_Recovery_V9R2M950_1_ppc.iso but got this error:

    Management console corrective service installation in progress. Please wait...
    Corrective service file offload from remote server in progress...
    The corrective service file offload was successful. Continuing with HMC service installation...
    applyUpdates 1=/dump/efix/HMC_Recovery_V9R2M950_1_ppc.iso
    mount: /dev/loop0 is write-protected, mounting read-only
    Verifying Certificate Information
    Authentication Failure. HMC not updated
    Corrupted install image or incorrect time on HMC
    Please verify the date/time of the hmc and retry
    Corrective service installation has failed.
    View the HMC log for details.

    Nothing wrong with date and time found.
    So it should be a corrupted image.  So took anew download, same error !

    Any Ideas ?

    Greetings
    Fred



    ------------------------------
    Fred Langner-Lind
    ------------------------------


  • 2.  RE: Update to V9R2M950

    IBM Champion
    Posted Wed March 03, 2021 02:25 AM
    Hello!

    Are you installing this on virtual HMC instance...? Or on physical CR1 HMC? 


    Br,
    tommi

    ------------------------------
    Tommi Sihvo, Lead Service Architect
    TietoEVRY, Compute Services
    email tommi.sihvo@tieto.com mobile +358 (0)40 5180 Finland
    ------------------------------



  • 3.  RE: Update to V9R2M950

    Posted Wed March 03, 2021 03:44 AM
    Hello Tommi,
    the real CR1 Machine , I did the upgrade via Iso images which I downloade via Download Director from IBM .diret to an
    IBM i Partition in File System.

    ------------------------------
    Fred Langner-Lind
    ------------------------------



  • 4.  RE: Update to V9R2M950

    Posted Wed March 03, 2021 03:04 AM

    Hello

    I don't know if you direct download from IBM or your own FTP server.

    Is checksum SHA1 value ok of your download repository? The "authentication failure" hmc message means HMC embeded sha1sum calculation is not matching

    You can use sha1sum command on linux , or 7zip embeded CRC SHA1 fonction directly  in windows explorer to check your downloaded image.

    you should find this SHA1 value for V9R2 M950 ppc image :

    if checksum is ok , may be a problem during ftp transfert (set in binary mode ?)

    After installing MH01858 on your V9R1, you must do a Save Upgrade Data (using option - diskusb , or saveupgdata -r diskftp -h ftpserver -u ftpuser
    -d /home/ftpuser/saveupgdata if you are not onsite ), then reboot on you installation image /media

    This will allow automatic restoration of hmc parameters during upgrade using the disk drive copy. And in case of problems requiring a complete reinstallation ,  you will have a copy on ftp server (I use to work localy, backup on  USB media saved my life;) .

    Make sure you HMC time and BMC time are ok if using a 7063 appliance (connect on it through http session using ADMIN user profile ). If you updated BMC/pnor FW on your 7063, make sure to set time again in BMC before restarting hmc , as stated in readme.



    ------------------------------
    Christophe Ducrocq
    ------------------------------



  • 5.  RE: Update to V9R2M950

    Posted Wed March 03, 2021 03:47 AM
    Thank you Christophe,
    update was not done via network image

    ------------------------------
    Fred Langner-Lind
    ------------------------------



  • 6.  RE: Update to V9R2M950

    Posted Wed March 03, 2021 05:43 AM
    Edited by Christophe Ducrocq Wed March 03, 2021 05:50 AM

    If upgrading using a media (DVD-DL media /USB ) use single iso file you get from fixcentral to create media (and for USB Rufus /image usb ...won't work, I use Cygwin emulation)

    if upgrading using network method (alt boot disk ...), you need to use several network images, not the iso that is used for media devices.

    Method is here

    Model 7063 and vHMC for PowerVM: Upgrading the HMC from Version V9R1 to V9R2M950

    Ibm remove preview
    Model 7063 and vHMC for PowerVM: Upgrading the HMC from Version V9R1 to V9R2M950
    This document provides instructions to upgrade vHMC for PowerVM and HMC 7063 machine type from Version 9 Release 1 with mandatory fix MH01858 to V9R2M950.
    View this on Ibm >

    you need to have img2a, img3a, base.img, disk1.img and hmcnetworkfiles.sum files

    regards
    ------------------------------
    Christophe Ducrocq
    ------------------------------



  • 7.  RE: Update to V9R2M950

    Posted Tue October 19, 2021 09:07 AM
    What is the command in Cygwin to create the Bootable USB?

    ------------------------------
    Rick Eggleston
    ------------------------------



  • 8.  RE: Update to V9R2M950