Hi Steve ,
Thank you for your response
On one AIX server ( 7.1) ===> it was installed successfully
on an other AIX server (6.1 ) ===> i got this error for rpm.rte :
Requisite Failures
------------------
SELECTED FILESETS: The following is a list of filesets that you asked to
install. They cannot be installed until all of their requisite filesets
are also installed. See subsequent lists for details of requisites.
rpm.rte 4.15.1.1 # RPM Package Manager
MISSING REQUISITES: The following filesets are required by one or more
of the selected filesets listed above. They are not currently installed
and could not be found on the installation media.
bos.rte 7.1.0.0 # Base Level Fileset
<< End of Failure Section >>
and for yum_bundle.tar i got this message :
# rpm -Uvh /var/tmp/*.rpm
error: failed dependencies:
libcrypto.a(libcrypto.so) is needed by curl-7.52.1-1
libssl.a(libssl.so) is needed by curl-7.52.1-1
libcrypto.a(libcrypto.so) is needed by python-2.7.10-1
libssl.a(libssl.so) is needed by python-2.7.10-1
libcrypto.a(libcrypto.so) is needed by python-pycurl-7.19.3-1
Thank you
------------------------------
mostafa BE84
IBM
montreal
------------------------------
Original Message:
Sent: Mon November 23, 2020 08:38 AM
From: Steve Munday
Subject: python 2.6 or higher on AIX
Mostafa,
Hi, no problem, just use your browser to pull down the rpm and tym_bundle.tar and then transfer to the LPAR.
In the yum_bundle you'll have the following, all of which get installed when you run the rpm -Uvh /var.tmp/*.rpm
ca-certificates-2016.10.7-2.aix6.1.ppc.rpm
curl-7.52.1-1.aix6.1.ppc.rpm
db-4.8.24-3.aix6.1.ppc.rpm
gdbm-1.8.3-5.aix5.2.ppc.rpm
gettext-0.19.7-1.aix6.1.ppc.rpm
glib2-2.14.6-2.aix5.2.ppc.rpm
pysqlite-1.1.7-2.aix6.1.ppc.rpm
python-2.7.10-1.aix6.1.ppc.rpm
python-devel-2.7.10-1.aix6.1.ppc.rpm
python-iniparse-0.4-1.aix6.1.noarch.rpm
python-pycurl-7.19.3-1.aix6.1.ppc.rpm
python-tools-2.7.10-1.aix6.1.ppc.rpm
python-urlgrabber-3.10.1-1.aix6.1.noarch.rpm
readline-6.1-2.aix6.1.ppc.rpm
sqlite-3.15.2-1.aix6.1.ppc.rpm
yum-3.4.3-7.aix6.1.noarch.rpm
yum-metadata-parser-1.1.4-2.aix6.1.ppc.rpm
Regards, Steve
------------------------------
Steve Munday
AIX, IBM i, PowerVM
Original Message:
Sent: Mon November 23, 2020 08:25 AM
From: mostafa BE84
Subject: python 2.6 or higher on AIX
Hi Steve
But my server did not have access to internet
How can yum bundle will install the python with all dependencies ?
Thank you
------------------------------
mostafa BE84
IBM
montreal
Original Message:
Sent: Mon November 23, 2020 08:10 AM
From: Steve Munday
Subject: python 2.6 or higher on AIX
Mostafa,
Hi, you need to download (1) rpm, so you have the latest, and then (2) the yum bundle which includes the necessary dependencies. It'll be easier than trying to work out what you do/don't need Python dependency wise.
Regards, Steve
------------------------------
Steve Munday
AIX, IBM i, PowerVM
Original Message:
Sent: Mon November 23, 2020 07:16 AM
From: mostafa BE84
Subject: python 2.6 or higher on AIX
Hi Steve ,
Thank you for your response ,
I have started with this option : i downloaded first python with some dependencies and when trying installing i got other required dependencies etc ...
and the cycle did not stop
I'm just wondering if there is a bundle of packages that can be downloaded at the same time ?
thank you
------------------------------
mostafa BE84
IBM
montreal
Original Message:
Sent: Mon November 23, 2020 06:42 AM
From: Steve Munday
Subject: python 2.6 or higher on AIX
Mostafa,
Hi, you'll need to download to a PC/Laptop first and then transfer to the LPAR before running the installations for rpm and yum.
Regards, Steve
------------------------------
Steve Munday
AIX, IBM i, PowerVM
Original Message:
Sent: Mon November 23, 2020 06:18 AM
From: mostafa BE84
Subject: python 2.6 or higher on AIX
Hi ,
Thank you for your replay ,
this server is an private network , no internet available
please in this case do you think that YUM bundle can be the best solution ?
Thank you
------------------------------
mostafa BE84
IBM
montreal
Original Message:
Sent: Mon November 23, 2020 03:48 AM
From: Steve Munday
Subject: python 2.6 or higher on AIX
Hi, you could also try the following as this will give you the latest rpm & yum packages (yum bundle includes Python plus dependencies).
Download latest rpm from IBM and place in /var/tmp
http://ftp.software.ibm.com/aix/freeSoftware/aixtoolbox/INSTALLP/ppc/rpm.rte
cd /var/tmp
installp -caYgd /var/tmp rpm.rte rpm.rte
Then get the latest yum bundle (includes Python) from https://public.dhe.ibm.com/aix/freeSoftware/aixtoolbox/ezinstall/ppc/yum_bundle.tar and place in /var/tmp
tar xvf yum_bundle.tar
chmod 644 *.rpm
rpm -Uvh /var.tmp/*.rpm
Regards, Steve
------------------------------
Steve Munday
AIX, IBM i, PowerVM
Original Message:
Sent: Sat November 21, 2020 07:01 AM
From: mostafa BE84
Subject: python 2.6 or higher on AIX
Please on the same server , we need to install python-2.6 or a higher version
I have download a python and try it to install manually but i was not able because of dependencies
please is there a python package that can include all dependencies ?
#rpm -ivh python3-3.7.9-1.aix6.1.ppc.rpm
error: Failed dependencies:
bzip2 >= 1.0.8 is needed by python3-3.7.9-1.ppc
expat >= 2.2.9 is needed by python3-3.7.9-1.ppc
gdbm >= 1.18.1 is needed by python3-3.7.9-1.ppc
gettext >= 0.19.8.1 is needed by python3-3.7.9-1.ppc
libexpat.a(libexpat.so.1) is needed by python3-3.7.9-1.ppc
libffi >= 3.2.1 is needed by python3-3.7.9-1.ppc
libffi.a(libffi.so.6) is needed by python3-3.7.9-1.ppc
libgcc >= 8.3.0 is needed by python3-3.7.9-1.ppc
libgcc_s.a(shr.o) is needed by python3-3.7.9-1.ppc
libgdbm.a(libgdbm.so.6) is needed by python3-3.7.9-1.ppc
liblzma.a(liblzma.so.5) is needed by python3-3.7.9-1.ppc
libncurses.so is needed by python3-3.7.9-1.ppc
libpanel.so is needed by python3-3.7.9-1.ppc
libreadline.a(libreadline.so.8) is needed by python3-3.7.9-1.ppc
ncurses >= 6.2 is needed by python3-3.7.9-1.ppc
readline >= 8.0-2 is needed by python3-3.7.9-1.ppc
sqlite >= 3.32.1 is needed by python3-3.7.9-1.ppc
xz-libs >= 5.2.4 is needed by python3-3.7.9-1.ppc
zlib >= 1.2.11 is needed by python3-3.7.9-1.ppc
Please is there a work around to install python with all dependencies ?
Thanks for your help
------------------------------
mostafa BE84
IBM
montreal
------------------------------