App Connect

 View Only
Expand all | Collapse all

On CP4i integration server is showing ready but from inside its not started.

  • 1.  On CP4i integration server is showing ready but from inside its not started.

    Posted Tue December 21, 2021 07:19 AM
    Hi Team,

    On CP4i integration server is showing ready, but when we are trying to run mqsilist command to check on openshift CLI its showing that integration server is not running  and showing below error.

    bash-4.4$ mqsilist -i localhost -p 7600 -d 1
    BIP1921S: The integration node or integration server cannot be reached. Check that the integration node or integration server is running. Check that the TCP/IP address 'localhost' matches the address of the machine where the integration node or integration server is running, and that port '7600' matches the Administration REST API port that is configured for the integration node or integration server. See the following messages for details of the error.
    The utility encountered a problem while attempting to connect to the integration node or integration server.
    Check that the integration node or integration server is running, and check that TCP/IP address 'localhost' and port '7600' are correct. The TCP/IP address 'localhost' must be the address of the machine where the integration node or integration server is running. The port '7600' must be the same value as the Administration REST API port that is used by the integration node or integration server. Check that the HTTP listener that is used for the Administration REST API port is running by checking for BIP3132 in the integration node system log.
    BIP8032E: Unable to connect to the integration node or integration server.
    An attempt was made to connect to the integration node or integration server; this attempt was unsuccessful.
    Ensure that the integration node or integration server is running.

    ------------------------------
    Kaustubh Sawant
    ------------------------------


  • 2.  RE: On CP4i integration server is showing ready but from inside its not started.

    IBM Champion
    Posted Tue December 21, 2021 09:18 AM
    Edited by FJ Brandelik Tue December 21, 2021 09:18 AM
    You do not specify if you sourced mqsiprofile
    I assume ACE is running in a container. Did you specify a route for the container port 7600? If yes did you specify the same port or a different one?
    I would expect that you'd need to give the port in the route to your command.

    ------------------------------
    FJ Brandelik

    ------------------------------

    Original Message


  • 3.  RE: On CP4i integration server is showing ready but from inside its not started.

    IBM Champion
    Posted Fri December 24, 2021 09:35 AM
    What checks have you made so far?

    ------------------------------
    Amit Kapila
    Integration Developer
    Virtusa Limited
    London
    UK
    amitkapila@hotmail.com
    +44 (0)2085707240
    +44 (0)7976529902
    ------------------------------

    Original Message