Here is the output from "docker ps"
docker@boot2docker:~$ docker ps
CONTAINER ID IMAGE COMMAND CREATED STATUS PORTS NAMES
321eb6a90153 ibmcom/datapower-operations-dashboard "/sbin/init" 2 hours ago Up 2 hours 0.0.0.0:443->443/tcp, 0.0.0.0:60000->60000/tcp, 0.0.0.0:60020->60020/tcp, 0.0.0.0:9023->22/tcp dpod
5c0d79a5f254 dp "/opt/ibm/datapower/…" 3 hours ago Up 3 hours 0.0.0.0:1468->1468/tcp, 514/tcp, 0.0.0.0:9090-9099->9090-9099/tcp, 0.0.0.0:9022->22/tcp priceless_moore
------------------------------
Philip Mead
------------------------------
Original Message:
Sent: Thu March 18, 2021 08:46 AM
From: Philip Mead
Subject: Datapower Operations Dashboard (DPOD) console connection rejected
I have no problem with DataPower. It is the DataPower Operations Dashboard that I have problems with.
I am pulling DPOD using "docker pull ibmcom/datapower-operations-dashboard".
------------------------------
Philip Mead
Original Message:
Sent: Thu March 18, 2021 03:08 AM
From: Pierre Richelle
Subject: Datapower Operations Dashboard (DPOD) console connection rejected
Hello,
from what I can read, you are using docker to test DataPower.
You will find useful information here:
https://www.ibm.com/support/knowledgecenter/SS9H2Y_10.0/com.ibm.dp.doc/docker_dpapp.html
By default the web console is not enabled.
You can enable it using the cli by performing an attach to your container.
- login
to check issue the command
- co;
- show web-mgmt
You can also activate the console by providing the right environment variable (DATAPOWER_INTERACTIVE) as described in the above link.
------------------------------
Pierre Richelle
IBM Hybrid Cloud Integration Specialists
IBM
+32474681892
Original Message:
Sent: Wed March 17, 2021 08:02 AM
From: Francois Brandelik
Subject: Datapower Operations Dashboard (DPOD) console connection rejected
Did you try setting the port to 9090?
------------------------------
Francois Brandelik
Original Message:
Sent: Mon March 15, 2021 05:34 PM
From: Philip Mead
Subject: Datapower Operations Dashboard (DPOD) console connection rejected
I am running DP using the IBM-provided startup command.
When I try to connect to https://192.168.59.103 - the DPOD console - I get rejected - Chrome "192.168.59.103 refused to connect."
Is there something I need to do to get the initial console connection up?
Are there any logs I can get to? The "docker logs dpod -f --tail 99" command shows nothing.
------------------------------
Philip Mead
------------------------------