HI

I have to migrate the V7R3 full system partitionon Power9 to native partition on Power10 .

Power10 got NVMe disks.

I booted with USB latest V7R3 LIC available.

created namespaces 200GB using macro. formatted as well. namespace is showing as DD001

getting message following 

                                                                   
 Error:                                                            
     A device could not be selected to be the load source.         
                                                                   
     Return to Dedicated Service Tools and run diagnostics         
     to determine why a device could not be selected.              
     Correct the problem and install the Licensed Internal Code    
     again.                                                        
                                                                   
     request help     

Regards,

Isaac                                                      
                                                                   

Hello, I believe IBM Power-10 does support IBMi OS version V7R3 with correct TR level. I suggest you should go through with the below link before proceeding.

https://www.ibm.com/support/pages/ibm-i-platform-support-summary

HI

I have to migrate the V7R3 full system partitionon Power9 to native partition on Power10 .

Power10 got NVMe disks.

I booted with USB latest V7R3 LIC available.

created namespaces 200GB using macro. formatted as well. namespace is showing as DD001

getting message following 

                                                                   
 Error:                                                            
     A device could not be selected to be the load source.         
                                                                   
     Return to Dedicated Service Tools and run diagnostics         
     to determine why a device could not be selected.              
     Correct the problem and install the Licensed Internal Code    
     again.                                                        
                                                                   
     request help     

Regards,

Isaac                                                      
                                                                   

Hi. Thats correct. You cannot migrate a v7R3 to POWER10 without first updating the LIC to the correct resave and having the corresponding TR installed.

You need to perform a LIC SLIP install in POWER9 (plus PTFS & TR) to ensure the proper LIC resave before booting on POWER10 hardware. 

One more thing: All POWER10 models support V7R3 (with the appropriate LIC resave) except the 9028-21B (S1012) which does not support that version at all.

Regards

Hello, I believe IBM Power-10 does support IBMi OS version V7R3 with correct TR level. I suggest you should go through with the below link before proceeding.

https://www.ibm.com/support/pages/ibm-i-platform-support-summary

HI

I have to migrate the V7R3 full system partitionon Power9 to native partition on Power10 .

Power10 got NVMe disks.

I booted with USB latest V7R3 LIC available.

created namespaces 200GB using macro. formatted as well. namespace is showing as DD001

getting message following 

                                                                   
 Error:                                                            
     A device could not be selected to be the load source.         
                                                                   
     Return to Dedicated Service Tools and run diagnostics         
     to determine why a device could not be selected.              
     Correct the problem and install the Licensed Internal Code    
     again.                                                        
                                                                   
     request help     

Regards,

Isaac                                                      
                                                                   

Hello, I believe IBM Power-10 does support IBMi OS version V7R3 with correct TR level. I suggest you should go through with the below link before proceeding.

https://www.ibm.com/support/pages/ibm-i-platform-support-summary

HI

I have to migrate the V7R3 full system partitionon Power9 to native partition on Power10 .

Power10 got NVMe disks.

I booted with USB latest V7R3 LIC available.

created namespaces 200GB using macro. formatted as well. namespace is showing as DD001

getting message following 

                                                                   
 Error:                                                            
     A device could not be selected to be the load source.         
                                                                   
     Return to Dedicated Service Tools and run diagnostics         
     to determine why a device could not be selected.              
     Correct the problem and install the Licensed Internal Code    
     again.                                                        
                                                                   
     request help     

Regards,

Isaac