List of Contributions

Mohamed AFEILAL

Contact Details

My Content

1 to 18 of 18 total
Posted By Mohamed AFEILAL Thu April 09, 2020 06:18 AM
Found In Egroup: IBM Security Guardium
\ view thread
Hello Thank you Zibi for the answer. No LDAP is not used I am not a network expert and I have difficulty diagnosing the network configuration, I work with remote access. In your opinion, should the 'show network routes operational' command return the same information from the collector and the ...
Posted By Mohamed AFEILAL Wed April 08, 2020 06:51 PM
Found In Egroup: IBM Security Guardium
\ view thread
Hello I have a problem that has persisted for several weeks and is beginning to worry me seriously. I need your support to help me solve it. This problem is blocking a large extension project at the customer's site. It's a terrible slowness when logging on collectors only. No problem on the CM-Aggregator. ...
Posted By Mohamed AFEILAL Tue March 31, 2020 04:34 PM
Found In Egroup: IBM Security Guardium
\ view thread
Hello Maybe it's an old topic I've seen on one of the forums but I need your opinion or experience sharing on how to protect .pst files on a Microsoft Exchange server. My goal is to protect these files using only the CAS module, 'I don't have a FAM license at the moment'. I'm thinking of the ...
Posted By Mohamed AFEILAL Tue March 31, 2020 03:08 PM
Found In Egroup: IBM Security Guardium
\ view thread
Hello I found that the export of data from a collector and the import on the aggregator were programmed for the same time. I shifted between the two and it worked. I didn't have a problem today. I have a question, though. Why has it been working like this for months, the mistake only started a ...
Posted By Mohamed AFEILAL Fri March 27, 2020 07:03 PM
Found In Egroup: IBM Security Guardium
\ view thread
Hello I'm starting to have a very frequent problem of failure to export data from the collector to the aggregator (also configured as CM). I have only one Export per day scheduled around 5am. The export ends without error but the next export gives me the following error message and ends with failure: ...
Posted By Mohamed AFEILAL Sat March 21, 2020 06:08 AM
Found In Egroup: IBM Security Guardium
\ view thread
Hello A little remarke, Investigation Dashboard works on the CM and on the collector without any problem Command to be executed at CM (or collector) level grdapi enable_quick_search schedule_interval=2 schedule_units=MINUTE includeViolations=true all=true You need the minimum capacity required: ...
Posted By Mohamed AFEILAL Sat March 21, 2020 05:46 AM
Found In Egroup: IBM Security Guardium
\ view thread
Hello The CM and the collector communicate using the full name resolution request and not the IP address. If your DNS server does not already contain this information, I suggest you add the following two commands on each appliance : support store hosts support store hosts Attention ...
Posted By Mohamed AFEILAL Mon March 09, 2020 09:25 AM
Found In Egroup: IBM Security Guardium
\ view thread
Hi Marat All S-TAPs are under AIX 6.1. Regards ------------------------------ Mohamed AFEILAL ------------------------------
Posted By Mohamed AFEILAL Thu March 05, 2020 11:04 AM
Found In Egroup: IBM Security Guardium
\ view thread
In fact, we are trying to answer both cases: HA and disaster recovery. The load balancing is a benefit that I find it interesting, unless otherwise indicated. In a second phase of the project, we are going to install a CM and a collector in the disaster site (standby site). The collector of the ...
Posted By Mohamed AFEILAL Thu March 05, 2020 10:16 AM
Found In Egroup: IBM Security Guardium
\ view thread
Hello I installed ELB following a customer requirement. He wants to have load balancing between the collectors. Is there any special reason to not install the ELB I don't reinstall S-TAP on the database server, it's from the collector. As soon as I change the value of an S-TAP parameter in ''Install ...
Posted By Mohamed AFEILAL Thu March 05, 2020 09:21 AM
Found In Egroup: IBM Security Guardium
\ view thread
Hello Zibi Can you please be more explicit. What do you mean by manual install first? Regards ------------------------------ Mohamed AFEILAL ------------------------------
Posted By Mohamed AFEILAL Thu March 05, 2020 09:19 AM
Found In Egroup: IBM Security Guardium
\ view thread
Hi Wendy I re-installed S-TAP without specifying the following parameters STAP_ADDITIO..._SQLGUARD_IPS STAP_SQLGUARD_IP The instatation ends with failure. but when I position them, the installation ends as normal. In my opinion, it is necessary to specify these two mandatory parameters ...
Posted By Mohamed AFEILAL Thu March 05, 2020 08:51 AM
Found In Egroup: IBM Security Guardium
\ view thread
Yes I have created a group containing all the S-TAPs that I have assigned to a group containing both collectors. I think it's like this The problem of checking the Inspection Engine still persists. The control is Ok only from one collector (STAP_SQLGUARD_IP) : the 'main' ------------------------------ ...
Posted By Mohamed AFEILAL Thu March 05, 2020 08:17 AM
Found In Egroup: IBM Security Guardium
\ view thread
For more information During S-TAP installation 'Set up by client' I set the parameter STAP_SQLGUARD_IP to collector1_IP and STAP_ADDITIONAL_SQLGUARD_IPS to NULL. After Installation I see that STAP_SQLGUARD_IP takes the value collector2_IP and STAP_ADDITIONAL_SQLGUARD_IPS takes the value collector1_IP ...
Posted By Mohamed AFEILAL Thu March 05, 2020 07:59 AM
Found In Egroup: IBM Security Guardium
\ view thread
Hello Wendy I'm in version 11.1 I tried everything, NUM_MUS = 2 and 3 I just switched to an S-TAP to go to 3. Below are the messages I got LOG_NOTICE MSG(203) MODULE(1) SEV(2) COUNT(1) Secondary TLS main connection established with: Collector1_IP 2020-03-05 13:53:18.0 LOG_DEBUG ...
Posted By Mohamed AFEILAL Thu March 05, 2020 06:47 AM
Found In Egroup: IBM Security Guardium
\ view thread
Hello I have a Guardium configuration with 1 CM - Aggregator and 2 Collectors. I have enabled Enterprise Load Balancing for all S-TAPs. The CM is the Load Balancer. I see that at the CM (Aggregator) I am receiving traffic from the same database from both Collectors which confirms that the load ...
Posted By Mohamed AFEILAL Sat February 15, 2020 02:21 PM
Found In Egroup: IBM Security Guardium
\ view thread
I have configured the S-TAP Statistics report to receive the CPU consumption on the Database Server, I have set S-TAP_STATISTICS to value 1 (also -5 for test) at the S-TAP level but the report is still empty. I'm on version 11.1 of Guardium. Has anyone ever seen a similar problem before? Thank ...
Posted By Mohamed AFEILAL Mon February 10, 2020 09:53 AM
Found In Egroup: IBM Security Guardium
\ view thread
Hi everybody I have a question about the backup site configuration. In fact I have a customer with a main site on which he has - 6 Oracle servers - 2 collectors in ELB - 1 CM - Aggregator - Replication of database storage between the main site and the backup site In the event of a switch ...