Cloud Pak for Data

 View Only
Expand all | Collapse all

Issues Configuring ICP4D with Console

  • 1.  Issues Configuring ICP4D with Console

    Posted Wed May 29, 2019 01:05 PM
    Hi all, trying to setup my 3 nodes cluster with the following console in AWS:

    https://x.x.x.x:3232

    VIP 1 and 2 are working, first master node is working but for 2nd and 3rd master node, I get the following error:

    Can not connect to the IP address. Verify the IP and the network connection then try again.

    Ah8WEOfbQEiVvhUuq8zE_Screen Shot 2019-05-29 at 11.33.52 AM.png

    I tested ssh between all the vms, all ports are opened, I am using private IPs, followed the instructions for ELB and all is fine.

    Is there a log I can look at to see what is going on? Has anybody encountered this issue?


    ------------------------------
    Guillaume Labelle
    ------------------------------

    #CloudPakforDataGroup


  • 2.  RE: Issues Configuring ICP4D with Console

    Posted Wed May 29, 2019 01:08 PM
    I have found the issue. My VMs were not pingable.

    Once I enabled that, I was able to continue the installation.


    ------------------------------
    Guillaume Labelle
    ------------------------------