Hi Scott,
thanks a lot for your reply.
When I try server:9510:/tm1web I get a login prompt where I can select the server ansd when i choose my server I get:
"The TM1Web service parameter was not specified or is one of the configured locations"
The files you mentioned don't seem to have a setting for authentication mode:
pmpsvc_config.xml:
<?xml version="1.0" encoding="UTF-8"?>
<pmpsvc_config xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="pmpsvc_config.xsd">
<fpm_service>
<config class="com.ibm.cognos.pmpsvc.PMPSVCConfig"/>
<service name="PMPService">
<method name="setClients" sessionOptional="true"/>
</service>
</fpm_service>
<service>
<eventHandler class="com.ibm.ba.pm.service.pmpsvc.notification.app.contributor.event.handler.PMMobileEventHandler"/>
<!-- Uncomment the line below to change the location of the planning service application files -->
<!--appdef path="Location of planning service application files" /-->
<notifications emailProvider=""/>
<folder name="IBM Cognos TM1 Application - My Applications"/>
<appdef path=""/>
</service>
<clients>
<client id="thinClient" type="html-new" uri="http://cockpit03:9510/tm1web/Contributor.jsp">
<name>
<localeText default="true" locale="de" text="TM1 Application Web"/>
</name>
</client>
<client id="desktopClient" type="cognos-rcp" uri="servlet/CogrcpServlet?applicationId=CognosInsight">
<name>
<localeText default="true" locale="de" text="Cognos Insight - Verbunden"/>
</name>
</client>
<client id="distributedClient" type="cognos-rcp" uri="servlet/CogrcpServlet">
<name>
<localeText default="true" locale="de" text="Cognos Insight - Verteilt"/>
</name>
</client>
</clients>
</pmpsvc_config>
fpmsvc_config.xml:
fpm_config xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="fpmsvc_config.xsd">
<service forceQualifiedPaths="true">
<businessViewpoint enabled="false" uri="http://cockpit03:9510/bv"/>
<scorecarding enabled="true"/>
<httpHeader name="X-Content-Type-Options" value="nosniff"/>
<resource path=""/>
<provisioning allowInstalls="true" allowUpdates="true" uri=""/>
<users path=""/>
<external uri="http://cockpit03:9510"/>
<session timeout="60"/>
</service>
<tm1>
<gateway uri=""/>
<alternate_gateway_uris>
<alternate_gateway uri="*"/>
</alternate_gateway_uris>
<dispatcher uri=""/>
<admin_host name="cockpit03.ma.ad.fh-pforzheim.de">
<servers>
<server name="CXMD"/>
<server name="test"/>
</servers>
</admin_host>
</tm1>
<!--
The Cognos Insight publish feature enforces a set of minimum system requirements that are required to perform a publish. These are requirements on the system running
the TM1 Applications service where the new TM1 servers will be created. To change these system requirement settings add the <insight_publish> element.
maximumCDDDataMB - The maximum amount of TM1 data that can be sent in a publish request
maximumTM1ServersAllowed - The maximum number of servers that can run on this machine. This is the maximum number of servers that are registered with the tm1Admin service.
minimumFreeDiskSpaceMbRequired - The amount of disk space that must be available on the drive where the Tm1 data is published.
minimumFreeDiskSpaceMbRequired - The amount of free memory that must be available on the publish server.
-->
<!--
<insight_publish enabled="true" maximumCDDDataMB="100">
<system_requirements maximumTM1ServersAllowed="10" minimumFreeDiskSpaceMbRequired="5000" minimumFreeMemoryMbRequired="500"/>
</insight_publish>
-->
<!-- If low on disk space you can set a different drive for the published TM1 server data as an alternative to reducing minimumFreeDiskSpaceMbRequired -->
<!--
<insight_publish enabled="true" maximumCDDDataMB="100">
<tm1Data path="E:\PublishedServers"/>
<system_requirements maximumTM1ServersAllowed="10" minimumFreeDiskSpaceMbRequired="5000" minimumFreeMemoryMbRequired="500"/>
</insight_publish>
-->
<insight pmpsvcPingTime="30"/>
<insight_publish enabled="true"/>
</fpm_config>
The version of PA that I'm using is 2.0.6
In which version has the setup changed?
Thanks & Best Regards
Stefan
------------------------------
Stefan Held
------------------------------
Original Message:
Sent: Wed August 19, 2020 12:52 PM
From: Stefan Held
Subject: TM1 WEB login no longer working
Hi there,
I have configured CAM security and set my authentication mode in Planning Analytics to 5 (CAM Security) which works fine for Cognos Analytics accessing my cubes, and also for all the things I can do in architect, like cube security etc.
I have an Admin user defined in Analytics and this user is now Admin in my cube.
Unfortunately, my TM1 web tools are now no longer working.
When I access my :9510/pmpsvc address, I get a login prompt, and when I enter my Admin user credentials from CAM, it keeps telling me that there are no cubes that can be accessed with these credentials.
Same happens when I start Performance Manager from the Startmenu and try to connect direct.
Does anyone have an idea what could be wrong?
It can't be a solution to reset security back to internal every time I want to so something in the web tools.....
Thanks a lot & Best Regards
Stefan
------------------------------
Stefan Held
------------------------------
#PlanningAnalyticswithWatson